RE: can't get rhn_register (and therefore client s) working

[email protected]
Newsgroups gmane.network.up2date.current.devel
Message-ID <[email protected]>
Ryan,

Please check the contents of the files /etc/sysconfig/rhn/rhn_register and
/etc/sysconfig/rhn/up2date.
They should contain http://lada:080/XMLRPC and http://lada:8081/XMLRPC
rather than references to redhat

Regards
Asbjorn

-----Original Message-----
From: Ryan Speed [mailto:[email protected]]
Sent: 25 April 2002 00:21
To: [email protected]
Subject: [Current-server] can't get rhn_register (and therefore clients)
working


I recently setup current on a development machine at work and got it running
after a few minor problems (all to do with RHNS-CA-CERT).  I setup a few
up2date clients to use my server and everything worked and continues to work
no problem.

I figured it was time to slowly roll this out into production, and spent the
better half of yesterday trying to get it to work.  I installed current
exactly the way that I did on my development machine, built a brand new
redhat 7.2 machine, configured it to use my new current server, attempted to
run rhn_register and ran into problems.

I get the following error 5 times and see 0 activity in the current logfile.

A socket error occured: SSL_connect error, attempt #1-5

I have attempted everything from matching permissions exactly with my
working current server, generating a new certificate, completely
re-installing current from scratch.  I have created the following in hopes
that someone can help me figure this one out.


Directory listing on the client/server of RHNS-CA-CERT
http://speedo.ca/current/certs.txt

My current.conf file
http://speedo.ca/current/current.conf

the output of netstat -nlp on the server
http://speedo.ca/current/netstat.txt

the output of ps -ewxf on the server
http://speedo.ca/current/ps.txt

the rhn_register config file from my client
http://speedo.ca/current/rhn_register.cfg

the output of strace rhn_register from my client (hopefully this can be of a
little use)
http://speedo.ca/current/strace.txt

the output of a tcpdump on the server (you can see traffic on port 8081)
http://speedo.ca/current/tcpdump.txt

a list of the relevant packages on the server
http://speedo.ca/current/servpkg.txt

a directory listing of the package database on the server
http://speedo.ca/current/pkgdb.txt

If there's any other information that may be needed to figure this one out,
let me know, I hope I have provided enough.

Thanks in advance,
Ryan
_______________________________________________
Current-server mailing list
[email protected]
http://lists.dulug.duke.edu/mailman/listinfo/current-server


Visit us at http://www.clearstream.com/_focus1.htm    
                                                          
IMPORTANT MESSAGE

Internet communications are not secure and therefore Clearstream International does not accept legal responsibility for the contents of this message.

The information contained in this e-mail is confidential and may be legally privileged. It is intended solely for the addressee. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Any views expressed in this e-mail are those of the individual sender, except where the sender specifically states them to be the views of Clearstream International or of any of its affiliates or subsidiaries.

END OF DISCLAIMER
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.