=?windows-1256?Q?RE:_No-IP_?= =?windows-1256?Q?and_Real_V?= =?windows-1256?Q?NC_on_mult?= =?windows-1256?Q?iple_PC's=FE?=

Dear Christopher:

 

I have only one rounter, a 2Wire 2701HG-T.

 

The router has already the port forwarding configured for Real VNC ports (5800 and 5900 I guess). Right now it forwards to one of the PC's (the server PC which has an Internet Caffe software installed) as I don't know how to configure the others.

 

The "server" PC is just another Windows XP PC.

 

The router's external IP address is 189.xxx.xx.146.

 

All the PC's includying the one I can connect through my home PC are using static IP addresses ranging from 192.xxx.x.65 through 192.xxx.x.72 for a total of 8 PC's.
 
The PC's IP address that has the internet caffe software installed is 192.xxx.x.69
 
No-IP utility and Real VNC are installed on all 8 PC's and the host name is set to papeleria.no-ip.org
 
I use this host name to connect to the server PC from my home using Real VNC and it works with no problems.
 
Thanks for your help,

Roberto


 
> From: [email protected]
> To: [email protected]; [email protected]
> Subject: RE: No-IP and Real VNC on multiple PC's‏
> Date: Fri, 25 Sep 2009 12:14:56 +0100
> 
> 
> > What's the best way to configure No-IP free to connect to 8 
> > Windows XP PC's from my home computer?
> > 
> > All have Real VNC software installed and the No-IP utility.
> > 
> > Do I need multiple free No-IP accounts and multiple hosts?
> 
> 
> If the hosts are on physically separate Internet connections then yes,
> you'll need a no-ip hostname for each of them and you may still need to
> establish port mappings for each device if they're each behind a separate
> firewall/router. If they are on the same connection behind one NATting
> router/firewall, you will need to configure port forwarding for each machine
> and map a public port for each device. In that case, one no-ip hostname will
> suffice.
> 
> (For example, my home network has two machines with VNC on - I might have my
> router configured to forward connections from port 4000 to port 5900 on
> machine 1, and public port 5000 to port 5900 on machine 2. Then I just
> connect to 'myhostname.tld:5000' in the VNC viewer connection box to
> establish a connection - provided port forwarding is operational on the
> network then it 'just works' :)
> 
 		 	   		  
_______________________________________________
VNC-List mailing list
[email protected]
To remove yourself from the list visit:
http://www.realvnc.com/mailman/listinfo/vnc-list