Re: Keeping Radio Equipment Cool?
Cameron Crum <[email protected]> Wed, 23 Jul 2003 00:21:19 -0500
| Newsgroups | gmane.network.wireless.barwn |
|---|---|
| Message-ID | <[email protected]> |
If they aren't alreay in NEMA 4 boxes you might put them in one. PVC boxes best for the next part of my solution (goto www.mouser.com for these...they have the best prices I've found). Try to find a spot where it is shady more than sunny throughout the day...maybe on the north side of the elevator shaft or chiminey or something like that to mount your Nema Box. Now you could create a natural air circulator by drilling some small holes across the bottom and drilling a 1 1/2" inch hole in the top. Put some screen on the inside in the bottom to keep the bugs and such out. You could also line the screen with some dacron or just make a screen sandwich with two pieces of screen and some gauss to make a dust filter. On the top hole, go get youself a short piece (maybe 1" in length) of 1 1/2" inch PVC water pipe and a "U" shaped elbow and a small can of PVC cement. Stick the "U" on one end and stick the other end into the top of your box. Make sure you use the cement. Put a bead of silicon around the pipe/box joint to make sure no water creeps inside. The "U" keeps water from coming down into the box when it rains, yet still allows hot air to escape. As the hot air inside the box rises and exits, cooler air is pulled in the bottom. making a sort of natural fan. If you have an electric outlet nearby, you might even throw a couple of mini PC fans in the bottom of the box. Couldn't hurt and it might just be cheaper then a mini refrigerator ;) Cameron Phill Kenoyer wrote: > Does anyone have suggestions on how to keep roof-top radio equipment > cool? I have three Net Nimble WRIP's. Two of them I use as relays. > The problem that I have been having is they lock up in the heat. It > has been getting about 103 here and could get hotter. I need to find a > way to keep the electronics cool and also keep them sealed from the > dust, dirt, and sand. > > Any suggestions? > > Thanks! > > _______________________________________________ > BARWN-Chat mailing list > [email protected] > http://lists.barwn.org/mailman/listinfo/barwn-chat