1.3mi PtP link. Suggestions?

Steve Mickeler <[email protected]>
Newsgroups gmane.network.wireless.seattle.general
Message-ID <[email protected]>
I'm in the planning stages of a 1.3mi link. It's a NLOS situationdue to
some trees and rooftops.

I'm planning to use 2 x linksys WTR54GL units running DD-WRT.

Based on the following calculations, using a 2400MHz Tx frequency, the
1.31mi distance, along with a 200mW Tx power, -80dBm Rx sensitivity, 1dB
loss for connectors and cable, and 14dB antenna gain on the Tx and Rx, I
get a Theoretical System Operating Margin of 23.5 dB.

This is using a helical antenna, chosen because it is of a circular
polarization and according to my research, the best for getting through
and around obstructions.  Now I may be incorrect on this which is why I'm
asking here.

The antenna specs can be found here :
http://www.wade-antenna.com/Wade/Helical.PDF

Would anyone care to comment on this setup?
_______________________________________________
Talk mailing list
[email protected]
http://seattlewireless.net/mailman/listinfo/talk
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.