[zebra 22888] Re: 3 routerr on 3 networks
Gobbledegeek <[email protected]>
| Newsgroups | gmane.network.zebra |
|---|---|
| Message-ID | <[email protected]> |
Two things to try - 1. Change from 1m patch cable to 0.5m one between R2 and R3 and if see if that works ;) 2. Check ur ospf config to see if you've included the right network statements on all routers.. Rgrds On 20 Jun 2006 10:03:27 -0000, ashok kumar <[email protected]> wrote: > > Hi to all, > I've 3 routers with 3 networks connected circularly. > LAN--->ROUTER1--->ROUTER2--->ROUTER3-->LAN > and i am using ZEBRA router and OSPF protocol > > Routers details are: > > ROUTER1 > eth0 IP: 192.168.0.53 > gateway: 192.168.0.1 > eth1 IP: 192.168.1.2 > gateway: (kept empty) > > ROUTER2 > eth0 IP: 192.168.1.1 > gateway: 192.168.1.2 > eth1 IP: 192.168.2.2 > gateway: 192.168.2.1 > > ROUTER3 > eth0 IP: 192.168.2.1 > gateway: (kept empty) > eth1 IP: 192.168.0.56 > gateway: 192.168.0.1 > > > Now i want to check for shortest path to send a packet. > > I am trying to ping 192.168.2.1 from ROUTER2 its pinging through > path (ROUTER2--->ROUTER1) > > but when i removed direct connection form ROUTER1 its not pinging. cant > it take path like > ( ROUTER2--->ROUTER3--->LAN--->ROUTER1). > > Does OSPF protocol selects only SHORTEST PATH? > > > THANKS, > > > > <http://adworks.rediff.com/cgi-bin/AdWorks/sigclick.cgi/www.rediff.com/signature-home.htm/1507191490@Middle5?PARTNER=3> > > _______________________________________________ > Zebra mailing list > [email protected] > http://ml.zebra.org/mailman/listinfo/zebra > > > -- Nonchalantly yours GobbledeGeek [Everything but Gobbledegook.. !!] _______________________________________________ Zebra mailing list [email protected] http://ml.zebra.org/mailman/listinfo/zebra