Re: GoBiodiesel 10/21-22 -Great work accomplished!
Zac Imboden <[email protected]> Mon, 23 Oct 2006 16:11:04 -0700
| Newsgroups | gmane.org.clubs.gobiodiesel.mixmasters |
|---|---|
| Message-ID | <[email protected]> |
Right. I'll make sure we have copies for Friday. On Oct 23, 2006, at 3:26 PM, Kramer, Peter wrote: > Zac, > > > > Here is a site sketch I have. I will be cleaning it up further and > can send out updated copy tomorrow. Basically, this follows what > the processor design cmte came up with (like Chet mentioned in > other e-mail). > > > > From: Zac Imboden [mailto:[email protected]] > Sent: Monday, October 23, 2006 11:55 AM > To: Kramer, Peter > Cc: Chet Knaup; Felix Kersting; wheelerk-/[email protected]; Seth Moody; > Brian Jamison; T Tricola; [email protected]; > [email protected]; Ron Buckner; Karen Kruse; GoBiodiesel > Mixmasters > Subject: Re: GoBiodiesel 10/21-22 -Great work accomplished! > > > > I'm thinking Friday of this week for the meeting. I think we should > have it off-site so we can stay focused on coordination and not get > bogged down starting to do actual tasks. But we need a sketch of > the site, so we can visualize. I'll put together something. > > > > I'll add a meeting for Friday October 27th. I'm going to scout out > a good place to meet. The Lucky Lab wasn't bad, but not enough > light and a bit noisy. We need a good coffeehouse down near the > water (sort of central to east and west). > > > > I'll email this group and the announce list when I get a venue. > > > > On Oct 22, 2006, at 10:28 PM, Kramer, Peter wrote: > > > > > Jus a quick update to all that LOTS was done over the weekend! > See e-mail below for all things accomplished on Sat. In addition > to all that, today we also got the shed roof up cover ~10’ x 13’ > just south of the shipping container! It was great effort by all > who were down there this weekend (and a little help from mother > nature with fantastic, sunny weather!) that got us to where we are. > > > > Where do we go from here?.. > > > > No question about it! First and Foremost, we NEED a site > coordination meeting to prioritize many of the specifics on > site layout (both near term and long term once code review is > complete); set up for this Tues or Thur?.. > > > Finish the remainder of the shed roof; follow same convention for > 2x4 rafters and tin roof sheeting; we will just continue to extend > shed roof to end of container (do not worry about size concerns or > permitting at this time; this is a roof to get us thr the winter – > if it can stay as permanent once code official review, GREAT!, if > not, no big deal, at least we stayed dry this winter!); NEED: AT > LEAST (4) MORE 26” X 12” PIECES OF TIN ROOF (purchased at any Lowes > or H Depot). That should be it, you can scrounge around the site > to cobble together 2x4 supports; nails w/ rubber grommets are in > tool box in container; we used a nail gun for all lumber connections > > > NEED A DELIVERY OF ~4 YDS GRAVEL (someone will need to validate > that estimate); this also needs approval for purchase by the board. > > > Once shed complete and gravel (or some good foundation material) is > laid; re-locate washing totes, dryer, oil jug drainage system (old, > converted oil tank) and a couple WVO totes > > > move generator storage, other small storage shed N of container, > and methoxide mixer and shed to some location S of container (this > is why we NEED a site planning meeting!) > > > finish clearing up area between Brian’s place and container so > Bluesky fuel distribution can re-locate > > > get the (4) new totes final cleaning done (awesome job on getting > them to where they are in just one work party day!) so they can be > ear-marked for use; glycerin storage, WVO, another dryer?.. > > > Concurrent to all these items, Ron is moving ahead with our > temporary electrical solution, and working close with Brian. Ron > assures me he will have elec provided such that by Thur > Mixmastering, no generator will be needed!!! > > > > While a number of these tasks are dependant on a site planning > meeting taking place, I would at least encourage people to step up > and help finish the shed in the mean-time. Weather is looking nice > again for tomorrow, after that, starting to get a little dicey. If > you want to go down to gain some more headway on this, I can’t > guarantee who else will be there, but there’s a really good chance > Bio, the black cat will be. He’s always there!! > > > > Zac will be following up with specifics for a site coordination > meeting. Thanks again all for an awesome weekend. > > > > Pete > > > > p.s. Ron also got at least a few more hours of drying in for the > fuel. Check with Ron on status and if its ready for distribution. > > > > Peter Kramer, LEED™ AP > > > > BAS Sales Engineer > > > > From: wheelerk-/[email protected] [mailto:wheelerk-/[email protected]] > > To: Kramer, Peter > > > > > > -Last of concrete ruble removed and taken to McF. > > -Karen picked up all the metal and took loaded up for recycling. > > -Mix masters cooked up some fuel. > > Here's what didn't get done and problems we ran into: > > Problem: Where does it need to be placed? Back near the other > totes by > > Solution: Stack it near the totes, central to all with enough > room to > > to establish gravity feed to all totes. This may mean > lowering > > moved to make room. > > Problem: Zack advised that there are restrictions to size of the > roof per > > less than 120 square feet. Nobody, including myself > wanted to do > > will not meet code for the roof joists. > > He was going to work on the shelter and > informed us of > > will meet this next Friday with Zack?, Tom?, > and Felix > > to see what can be done and draw up plans > (what a > > > > > > > > <BioD Coop site2-3.pdf> -------------------------------------------------------------- Zac Imboden [email protected] 1534 SE 35th Place Portland, OR 97214 971-563-2477 _______________________________________________ mixmasters mailing list [email protected] http://lists.gobiodiesel.org/mailman/listinfo/mixmasters