Puloma Mukherjee (DATAPATH)

Hi Puloma, 
	Thanks for the modules that u have design.
please, Send the FEC,CRC and HEC blocks that you have already made,
you can proceed to make the correlator,access code generator and
encryption if it is alright you...

Please do send the RTL of the module and the test bench used in
simulation in VHDL or verilog... 
you can also send a brief design specs. matching the characterestics of
each module .. We will use it to modify and update our NOUR specs.
Accordingly ... 

so please send us :
RTL of both module and the test bench.
Corresponding design specs. for each.
go ahead for the next modules 
Thanks Puloma for your time and cooperation...

Best Regards,

Mohamed A.Salem
Handasa Arabia Co-Founder
www.handasarabia.org


Hi On Thu, 2003-12-18 at 14:55, Mohamed Salem wrote:
> Dear ALL,
> The DataPath design and integration process focuses on the following
> modules:
> 
> --CRC
> --HEC
> --Scrambler/De-Scrambler
> --FEC
> --Correlator.
> --Access Code Correlator 
> --Flow Controller
> --Header
> --p/s 
> --s/p 
> --RF Interface
> --Encryption.
> 
> I'll send the interested participants individual e-mails titled on the
> mailing-list here with their proposed activities in NOUR >> 
> 
> Thanks all for time and interest..
> 
> Best Regards,
> Mohamed A.Salem
> Handasa Arabia Co-Founder
> www.handasarabia.org
> 
> 
> 
> 
>  Sun, 2003-12-14 at 14:41, Mohamed Salem wrote:
> > Hi all,
> > How r u doing .. ? I wish u all a good year .. 
> > ----- BACK TO ACTIVITY >.
> > We will start to integrate the NOUR DATAPATH at first ..
> >  we need to start from the datapath and simulate each block and
> > integrate the datapath and release it at first .. 
> > Then we will move from one part to another until the project end ..
> > 
> > 	NOw, I need the participants who has completed some of the blocks to
> > send it  as we need to upload it under the project files ..
> > Each participant who sees that he/she can add to the specs section for
> > the core he/she designed or would be designed by other, please send ur
> > modifications and comments .. 
> > AGAIN, we will start from the DATAPATH ..
> > 
> > IF any one needs to add to the specs of any block or modify it , please
> > do here on the  list .. 
> > 
> > Attach with ur code (if u designed the core ) the block diagram and a
> > brief description . we will need also the test bench used in
> > simulation..
> > 
> > ON another note, Puloma had done some work , please Puloma forward your
> > code ..
> > Thanks all for your time and interest ..
> > We are defintely progressing with anyone effort..
> > 
> > Thanks 
> > Best Regards,
> > Mohamed A.Salem
> > Handasa Arabia Co-Founder
> > www.handasarabia.org
> > 
> > 
> > --------------------------
> > NOUR Mailing List
> > Handasa Arabia Organization
> > http://www.handasarabia.org
> > [email protected]
> > 
> > Message number 89


--------------------------
NOUR Mailing List
Handasa Arabia Organization
http://www.handasarabia.org
[email protected]

Message number 91