(Sanjay Kokitkar) DATAPATH

Hi Sanjay, 
How r u doing ? Thanks for your interest in participation in NOUR.
Handasa Arabia is pleased to have an expert HDL designer in NOUR team.
As u know , we are now concerned with the Bluetooth DATAPATH at first.
I suggest that you please, have a look on the specs. of datapath
starting from page 5-15 in NOUR specs.
http://www.handasarabia.org/document.php?id=83
and pick the blocks that would suit your preference. 
The modules that you can work on are from the following pool :
--flow controller.(Datapath controller)
--Header.
--p/s and S/p 
--RF interface.
--Scrambler/De-scrambler(whitening).
as Puloma had done some of the rest and propse to design the others...
You can also work potentially in the integration of the datapath modules
and simulation , you can work on an overall test-bench for the datapath.
Please send me your feedback ..
If the design specs. of any part is not enough, do guide us to the
suitable specs.  or let us know to figure out the appropriate specs.
(The specs document is under development!)( It is us /Nour Participants
who will frame it in the last form.....)

Please provide me your Yahoo ID , so I can add you to my messenger list 
My Yahoo ID is : mosalem2003

Best Regards,
Mohamed A.Salem
Handasa Arabia Co-Founder
www.handasarabia.org
 
On Thu, 2003-12-18 at 14:55, Mohamed Salem wrote:
> Dear ALL,
> The DataPath design and integration process focuses on the following
> modules:
> 
> --CRC
> --HEC
> --Scrambler/De-Scrambler
> --FEC
> --Correlator.
> --Access Code Correlator 
> --Flow Controller
> --Header
> --p/s 
> --s/p 
> --RF Interface
> --Encryption.
> 
> I'll send the interested participants individual e-mails titled on the
> mailing-list here with their proposed activities in NOUR >> 
> 
> Thanks all for time and interest..
> 
> Best Regards,
> Mohamed A.Salem
> Handasa Arabia Co-Founder
> www.handasarabia.org
> 
> 
> 
> 
>  Sun, 2003-12-14 at 14:41, Mohamed Salem wrote:
> > Hi all,
> > How r u doing .. ? I wish u all a good year .. 
> > ----- BACK TO ACTIVITY >.
> > We will start to integrate the NOUR DATAPATH at first ..
> >  we need to start from the datapath and simulate each block and
> > integrate the datapath and release it at first .. 
> > Then we will move from one part to another until the project end ..
> > 
> > 	NOw, I need the participants who has completed some of the blocks to
> > send it  as we need to upload it under the project files ..
> > Each participant who sees that he/she can add to the specs section for
> > the core he/she designed or would be designed by other, please send ur
> > modifications and comments .. 
> > AGAIN, we will start from the DATAPATH ..
> > 
> > IF any one needs to add to the specs of any block or modify it , please
> > do here on the  list .. 
> > 
> > Attach with ur code (if u designed the core ) the block diagram and a
> > brief description . we will need also the test bench used in
> > simulation..
> > 
> > ON another note, Puloma had done some work , please Puloma forward your
> > code ..
> > Thanks all for your time and interest ..
> > We are defintely progressing with anyone effort..
> > 
> > Thanks 
> > Best Regards,
> > Mohamed A.Salem
> > Handasa Arabia Co-Founder
> > www.handasarabia.org
> > 
> > 
> > --------------------------
> > NOUR Mailing List
> > Handasa Arabia Organization
> > http://www.handasarabia.org
> > [email protected]
> > 
> > Message number 89


--------------------------
NOUR Mailing List
Handasa Arabia Organization
http://www.handasarabia.org
[email protected]

Message number 92