RE: screen flicker: probably not X related

"Tony Langdon (ATC)" <[email protected]>
Newsgroups gmane.org.user-groups.mlug.main
Message-ID <61646882C848D81185530048546447F433C417@mel-exchange.atctraining.com.au> 
> I have two 9V and two 7.5's if I could simplify with I unit 
> providing varied 
> output to 4 devices maybe I would consider, but the magic 
> words are cost and 
> simplify.

9V DC power supply might do the trick.  If for some reason the device
running off 7.5V can't handle 9V, put 2 diodes in series with its positive
lead (I suspect it can, as those wall wards have very poor regulation and a
7.5V one can exceed 9V under light load).
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.