Re: Failed: phase compiling: matplotlib-py37-1.5.3-1 failed

On 10/4/20 5:58 PM, Hanspeter Niederstrasser wrote:
> On 10/4/20 5:18 PM, Stephen Kawalko wrote:
>> I encountered a 2nd problem trying to install matplotlib-py37. This 
>> time it’s with matplotlib itself instead of a dependancy. I have the 
>> current version of fink and Xcode installed. FWIW, matplotlib-py27 
>> installs without a hitch.
>>
>> [user@computer]$ fink install matplotlib-py37
>> Information about 10342 packages read in 1 seconds.
>> The following package will be installed or updated:
>>   matplotlib-py37
>> Setting runtime build-lock...
>> dpkg-deb -b 
>> /opt/sw/src/fink.build/root-fink-buildlock-matplotlib-py37-1.5.3-1 
>> /opt/sw/src/fink.build
>> dpkg-deb: building package `fink-buildlock-matplotlib-py37-1.5.3-1' in 
>> `/opt/sw/src/fink.build/fink-buildlock-matplotlib-py37-1.5.3-1_2020.10.04-14.45.22_darwin-x86_64.deb'. 
>>
>> Installing build-lock package...
>> /opt/sw/bin/dpkg-lockwait -i 
>> /opt/sw/src/fink.build/fink-buildlock-matplotlib-py37-1.5.3-1_2020.10.04-14.45.22_darwin-x86_64.deb 
>>
>> Selecting previously deselected package 
>> fink-buildlock-matplotlib-py37-1.5.3-1.
>> (Reading database ... 290970 files and directories currently installed.)
>> Unpacking fink-buildlock-matplotlib-py37-1.5.3-1 (from 
>> .../fink-buildlock-matplotlib-py37-1.5.3-1_2020.10.04-14.45.22_darwin-x86_64.deb) 
>> ...
>> Setting up fink-buildlock-matplotlib-py37-1.5.3-1 
>> (2020.10.04-14.45.22) ...
>>
>> sudo -u fink-bld [ENV] sh -c /tmp/fink.HmuD0
>> env LANG=C LC_ALL=C /opt/sw/bin/tar  --no-same-owner 
>> --no-same-permissions -xf /opt/sw/src/matplotlib-1.5.3.tar.gz
>> sudo -u fink-bld [ENV] sh -c /tmp/fink.z8CT_
>> [ -r /opt/sw/fink/dists/stable/main/finkinfo/sci/matplotlib-py.patch ]
>> sudo -u fink-bld [ENV] sh -c /tmp/fink.mnb8D
>> sed 's|@PREFIX@|/opt/sw|g' < 
>> /opt/sw/fink/dists/stable/main/finkinfo/sci/matplotlib-py.patch | 
>> patch -p1
>> patching file lib/matplotlib/font_manager.py
>> patching file setup.cfg.template
>> patching file setup.py
>> patching file setupext.py
>> Hunk #1 succeeded at 154 (offset 4 lines).
>> Hunk #2 succeeded at 1011 (offset 8 lines).
>> patching file src/qhull_wrap.c
>> sudo -u fink-bld [ENV] sh -c /tmp/fink.TUqwn
>> /tmp/fink.uLeqR
>> #!/bin/sh -ev
>>   if [ 37 -ge 30 ]; then
>>     egrep -v '^gtk|^wxagg|^cairo' setup.cfg.template > setup.cfg
>>   else
>>     cp -a setup.cfg{.template,}
>>   fi
>>   export 
>> PKG_CONFIG_PATH="/opt/sw/lib/glib-2.0/pkgconfig-strict:$PKG_CONFIG_PATH"
>>   /opt/sw/bin/python3.7 setup.py build
>> ============================================================================ 
>>
>> Edit setup.cfg to change the build options
>>
>> BUILDING MATPLOTLIB
>>              matplotlib: yes [1.5.3]
>>                  python: yes [3.7.8 (default, Jul 31 2020, 19:28:16)  
>> [Clang
>>                          11.0.3 (clang-1103.0.32.62)]]
>>                platform: yes [darwin]
>>
>> REQUIRED DEPENDENCIES AND EXTENSIONS
>>                   numpy: yes [version 1.14.5]
>>                dateutil: yes [using dateutil version 2.7.3]
>>                    pytz: yes [using pytz version 2020.1]
>>                  cycler: yes [using cycler version 0.10.0]
>>                 tornado: yes [using tornado version 5.1]
>>               pyparsing: yes [using pyparsing version 2.4.5]
>>                  libagg: yes [pkg-config information for 'libagg' 
>> could not
>>                          be found. Using local copy.]
>>                freetype: yes [version 2.6.3]
>>                     png: yes [version 1.6.37]
>>                   qhull: yes [Using system Qhull (version unknown, no 
>> pkg-
>>                          config info)]
>>
>> OPTIONAL SUBPACKAGES
>>             sample_data: yes [installing]
>>                toolkits: yes [installing]
>>                   tests: yes [nose 0.11.1 or later is required to run the
>>                          matplotlib test suite. Please install it with 
>> pip or
>>                          your preferred tool to run the test suite / 
>> using
>>                          unittest.mock]
>>          toolkits_tests: yes [nose 0.11.1 or later is required to run the
>>                          matplotlib test suite. Please install it with 
>> pip or
>>                          your preferred tool to run the test suite / 
>> using
>>                          unittest.mock]
>>
>> OPTIONAL BACKEND EXTENSIONS
>>                  macosx: yes [installing, darwin]
>> objc[84572]: +[__NSCFConstantString initialize] may have been in 
>> progress in another thread when fork() was called.
>> objc[84572]: +[__NSCFConstantString initialize] may have been in 
>> progress in another thread when fork() was called. We cannot safely 
>> call it or ignore it in the fork() child process. Crashing instead. 
>> Set a breakpoint on objc_initializeAfterForkError to debug.
>>                  qt5agg: no  [Check timed out]
>> objc[84590]: +[__NSCFConstantString initialize] may have been in 
>> progress in another thread when fork() was called.
>> objc[84590]: +[__NSCFConstantString initialize] may have been in 
>> progress in another thread when fork() was called. We cannot safely 
>> call it or ignore it in the fork() child process. Crashing instead. 
>> Set a breakpoint on objc_initializeAfterForkError to debug.
>>                  qt4agg: no  [Check timed out]
>>                 gtk3agg: no  [Requires pygobject to be installed.]
>>               gtk3cairo: no  [Requires cairocffi or pycairo to be 
>> installed.]
>>                  gtkagg: no  [Requires pygtk]
>>                   tkagg: yes [installing; run-time loading from Python 
>> Tcl /
>>                          Tk]
>>                   wxagg: no  [requires wxPython]
>>                     gtk: no  [Requires pygtk]
>>                     agg: yes [installing]
>>                   cairo: no  [cairocffi or pycairo not found]
>>               windowing: no  [Microsoft Windows only]
>>
>> OPTIONAL LATEX DEPENDENCIES
>>                  dvipng: yes [version 1.14]
>>             ghostscript: yes [version 9.14]
>>                   latex: yes [version 3.14159265]
>>                 pdftops: yes [version 0.26.2]
>>
>> OPTIONAL PACKAGE DATA
>>                    dlls: no  [skipping due to configuration]
>>
>> ============================================================================ 
>>
>>                          * The following required packages can not be 
>> built:
>>                          * qt5agg
> 
> On 10.13, I'm getting the same failure for py27, py36, and py37. Both 
> built for me last year, suggesting that this is a missing declared 
> dependency that got uninstalled at some point.
> 
> Since you have a working matplotlib-py27, an option is to run the 
> command `fink list -i py37 py27` to show which pythonmods you have 
> installed for py27 but are missing for py37, and see if installing those 
> fixes the py37 build.
> 
> How does the above diagnostic output look for matplotlib-py27? Do any of 
> the agg sections look different?

The quick solution is to disable the qt5agg backend while this is sorted 
out, since it seems to be currently unbuildable.

Hanspeter


_______________________________________________
Fink-beginners mailing list
[email protected]
List archive:
https://sourceforge.net/p/fink/mailman/fink-users/
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-beginners