Catalina and XCODE12.1 gcc10 install fails

Dear all,

gcc10 install fails....

     gcc -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DLT_OBJDIR=\".libs/\" 
-DHAVE_LITTLE_ENDIAN=1 -DHAVE_CLOCK_GETTIME=1 -DTIME_WITH_SYS_TIME=1 
-DHAVE_LOCALE_H=1 -DHAVE_WCHAR_H=1 -DHAVE_STDARG=1 -DHAVE_SYS_TIME_H=1 
-DHAVE_STRUCT_LCONV_DECIMAL_POINT=1 -DHAVE_STRUCT_LCONV_THOUSANDS_SEP=1 
-DHAVE_ALLOCA_H=1 -DHAVE_ALLOCA=1 -DHAVE_UINTPTR_T=1 -DHAVE_VA_COPY=1 
-DHAVE_SETLOCALE=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_SIGNAL=1 
-DHAVE_SIGACTION=1 -DHAVE_LONG_LONG=1 -DHAVE_INTMAX_T=1 
-DMPFR_HAVE_INTMAX_MAX=1 -DMPFR_HAVE_NORETURN=1 
-DMPFR_HAVE_BUILTIN_UNREACHABLE=1 -DMPFR_HAVE_CONSTRUCTOR_ATTR=1 
-DMPFR_HAVE_FESETROUND=1 -DHAVE_SUBNORM_DBL=1 -DHAVE_SUBNORM_FLT=1 
-DHAVE_SIGNEDZ=1 -DHAVE_ROUND=1 -DHAVE_TRUNC=1 -DHAVE_FLOOR=1 
-DHAVE_CEIL=1 -DHAVE_NEARBYINT=1 -DHAVE_DOUBLE_IEEE_LITTLE_ENDIAN=1 
-DHAVE_LDOUBLE_IEEE_EXT_LITTLE=1 -DMPFR_USE_THREAD_SAFE=1 
-DMPFR_USE_C11_THREAD_SAFE=1 -DMPFR_USE_STATIC_ASSERT=1 
-DHAVE_ATTRIBUTE_MODE=1 -DPRINTF_L=1 -DPRINTF_T=1 -DPRINTF_GROUPFLAG=1 
-DHAVE___GMPN_SBPI1_DIVAPPR_Q=1 -DHAVE___GMPN_INVERT_LIMB=1 
-DHAVE___GMPN_RSBLSH1_N=1 -DMPFR_LONG_WITHIN_LIMB=1 
-DMPFR_INTMAX_WITHIN_LIMB=1 -DHAVE_GETRUSAGE=1 -I.  -DSRCDIR='"."' 
-I../src -I../src -I/opt/sw/include  -Wall -Wmissing-prototypes 
-Wpointer-arith -fno-stack-check -MT tzeta_ui.o -MD -MP -MF $depbase.Tpo 
-c -o tzeta_ui.o tzeta_ui.c &&\
     mv -f $depbase.Tpo $depbase.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc  -Wall 
-Wmissing-prototypes -Wpointer-arith -fno-stack-check -no-install 
-L../src/.libs -Wl,-search_paths_first -L/opt/sw/lib -o tzeta_ui 
tzeta_ui.o libfrtests.la -lm -lquadmath ../src/libmpfr.la -lgmp
libtool: warning: '-no-install' is ignored for x86_64-apple-darwin19.6.0
libtool: warning: assuming '-no-fast-install' instead
libtool: link: gcc -Wall -Wmissing-prototypes -Wpointer-arith 
-fno-stack-check -Wl,-search_paths_first -o .libs/tzeta_ui tzeta_ui.o  
-L../src/.libs -L/opt/sw/lib ./.libs/libfrtests.a 
/usr/local/lib/libquadmath.dylib -lm ../src/.libs/libmpfr.dylib 
/opt/sw/lib/gmp5/libgmp.dylib
make[2]: `libfrtests.la' is up to date.
/Applications/Xcode.app/Contents/Developer/usr/bin/make check-TESTS
../test-driver: line 107: 20092 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tversion
dyld: Library not loaded: /usr/local/lib/libquadmath.0.dylib
   Referenced from: 
/opt/sw/src/fink.build/libmpfr6-shlibs-4.1.0-1/mpfr-4.1.0/tests/.libs/tversion
   Reason: no suitable image found.  Did find:
     /usr/local/lib/libquadmath.0.dylib: code signature in 
(/usr/local/lib/libquadmath.0.dylib) not valid for use in process using 
Library Validation: library load disallowed by system policy
     /usr/local/lib/libquadmath.0.dylib: code signature in 
(/usr/local/lib/libquadmath.0.dylib) not valid for use in process using 
Library Validation: library load disallowed by system policy
     /usr/local/lib/libquadmath.0.dylib: code signature in 
(/usr/local/lib/libquadmath.0.dylib) not valid for use in process using 
Library Validation: library load disallowed by system policy
../test-driver: line 107: 20113 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tabort_prec_max
../test-driver: line 107: 20132 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tassert
../test-driver: line 107: 20152 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tabort_defalloc1
../test-driver: line 107: 20172 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tabort_defalloc2
../test-driver: line 107: 20191 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: talloc
../test-driver: line 107: 20210 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tinternals
../test-driver: line 107: 20231 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tinits
../test-driver: line 107: 20250 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tisqrt

--SNIP---

../test-driver: line 107: 23355 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: ttotal_order
../test-driver: line 107: 23375 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: ttrunc
../test-driver: line 107: 23394 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tui_div
../test-driver: line 107: 23413 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tui_pow
../test-driver: line 107: 23432 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tui_sub
../test-driver: line 107: 23451 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: turandom
../test-driver: line 107: 23470 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tvalist
../test-driver: line 107: 23489 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: ty0
../test-driver: line 107: 23508 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: ty1
../test-driver: line 107: 23527 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tyn
../test-driver: line 107: 23546 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tzeta
../test-driver: line 107: 23565 Abort trap: 6           "$@" > $log_file 
2>&1
FAIL: tzeta_ui
============================================================================
Testsuite summary for MPFR 4.1.0
============================================================================
# TOTAL: 183
# PASS:  0
# SKIP:  0
# XFAIL: 0
# FAIL:  183
# XPASS: 0
# ERROR: 0
============================================================================
See tests/test-suite.log
============================================================================
make[3]: *** [test-suite.log] Error 1
make[2]: *** [check-TESTS] Error 2
make[1]: *** [check-am] Error 2
make: *** [check-recursive] Error 1
### execution of /tmp/fink.yktyC failed, exit code 2
### execution of /tmp/fink.0D6Yq failed, exit code 2
Removing runtime build-lock...
Removing build-lock package...
/opt/sw/bin/dpkg-lockwait -r fink-buildlock-libmpfr6-shlibs-4.1.0-1
(Reading database ... 10231 files and directories currently installed.)
Removing fink-buildlock-libmpfr6-shlibs-4.1.0-1 ...
Failed: phase compiling: libmpfr6-shlibs-4.1.0-1 failed

Before reporting any errors, please run "fink selfupdate" and try again.

If you continue to have issues, please check to see if the FAQ on Fink's
website solves the problem.  If not, ask on one (not both, please) of
these mailing lists:

     The Fink Users List <[email protected]>
     The Fink Beginners List <[email protected]>,

with a carbon copy to the maintainer:

  David Fang <[email protected]>

Note that this is preferable to emailing just the maintainer directly,
since most fink package maintainers do not have access to all possible
hardware and software configurations.

Please try to include the complete error message in your report. This
generally consists of a compiler line starting with e.g. "gcc" or "g++"
followed by the actual error output from the compiler.

Also include the following system information:
Package manager version: 0.45.2
Distribution version: selfupdate-rsync Sat Oct 24 20:48:37 2020, 10.15, 
x86_64
Trees: local/main stable/main
Xcode.app: 12.1
Xcode command-line tools: 12.1.0.0.1.1602137645
Max. Fink build jobs:  1

-- 
Prof. Dr. Heinrich Miller
Helmholtz Professor for Glaciology
Alfred-Wegener-Institute
27568 Bremerhaven
mailto:[email protected]
Phone: 	+49 471 48311210
Mobile:	+49 170 9136994
Fax: 	+49 471 48311149



_______________________________________________
Fink-beginners mailing list
[email protected]
List archive:
https://sourceforge.net/p/fink/mailman/fink-users/
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-beginners