Re: Catalina and XCODE12.1 gcc10 install fails

On 10/25/20 4:34 AM, miller wrote:
 > Dear all,
 >
 > gcc10 install fails....
 >
 >      gcc -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DLT_OBJDIR=\".libs/\"
 > -DHAVE_LITTLE_ENDIAN=1 -DHAVE_CLOCK_GETTIME=1 -DTIME_WITH_SYS_TIME=1
 > -DHAVE_LOCALE_H=1 -DHAVE_WCHAR_H=1 -DHAVE_STDARG=1 -DHAVE_SYS_TIME_H=1
 > -DHAVE_STRUCT_LCONV_DECIMAL_POINT=1 -DHAVE_STRUCT_LCONV_THOUSANDS_SEP=1
 > -DHAVE_ALLOCA_H=1 -DHAVE_ALLOCA=1 -DHAVE_UINTPTR_T=1 -DHAVE_VA_COPY=1
 > -DHAVE_SETLOCALE=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_SIGNAL=1
 > -DHAVE_SIGACTION=1 -DHAVE_LONG_LONG=1 -DHAVE_INTMAX_T=1
 > -DMPFR_HAVE_INTMAX_MAX=1 -DMPFR_HAVE_NORETURN=1
 > -DMPFR_HAVE_BUILTIN_UNREACHABLE=1 -DMPFR_HAVE_CONSTRUCTOR_ATTR=1
 > -DMPFR_HAVE_FESETROUND=1 -DHAVE_SUBNORM_DBL=1 -DHAVE_SUBNORM_FLT=1
 > -DHAVE_SIGNEDZ=1 -DHAVE_ROUND=1 -DHAVE_TRUNC=1 -DHAVE_FLOOR=1
 > -DHAVE_CEIL=1 -DHAVE_NEARBYINT=1 -DHAVE_DOUBLE_IEEE_LITTLE_ENDIAN=1
 > -DHAVE_LDOUBLE_IEEE_EXT_LITTLE=1 -DMPFR_USE_THREAD_SAFE=1
 > -DMPFR_USE_C11_THREAD_SAFE=1 -DMPFR_USE_STATIC_ASSERT=1
 > -DHAVE_ATTRIBUTE_MODE=1 -DPRINTF_L=1 -DPRINTF_T=1 -DPRINTF_GROUPFLAG=1
 > -DHAVE___GMPN_SBPI1_DIVAPPR_Q=1 -DHAVE___GMPN_INVERT_LIMB=1
 > -DHAVE___GMPN_RSBLSH1_N=1 -DMPFR_LONG_WITHIN_LIMB=1
 > -DMPFR_INTMAX_WITHIN_LIMB=1 -DHAVE_GETRUSAGE=1 -I.  -DSRCDIR='"."'
 > -I../src -I../src -I/opt/sw/include  -Wall -Wmissing-prototypes
 > -Wpointer-arith -fno-stack-check -MT tzeta_ui.o -MD -MP -MF $depbase.Tpo
 > -c -o tzeta_ui.o tzeta_ui.c &&\
 >      mv -f $depbase.Tpo $depbase.Po
 > /bin/sh ../libtool  --tag=CC   --mode=link gcc  -Wall
 > -Wmissing-prototypes -Wpointer-arith -fno-stack-check -no-install
 > -L../src/.libs -Wl,-search_paths_first -L/opt/sw/lib -o tzeta_ui
 > tzeta_ui.o libfrtests.la -lm -lquadmath ../src/libmpfr.la -lgmp
 > libtool: warning: '-no-install' is ignored for x86_64-apple-darwin19.6.0
 > libtool: warning: assuming '-no-fast-install' instead
 > libtool: link: gcc -Wall -Wmissing-prototypes -Wpointer-arith
 > -fno-stack-check -Wl,-search_paths_first -o .libs/tzeta_ui tzeta_ui.o
 > -L../src/.libs -L/opt/sw/lib ./.libs/libfrtests.a
 > /usr/local/lib/libquadmath.dylib -lm ../src/.libs/libmpfr.dylib
 > /opt/sw/lib/gmp5/libgmp.dylib
 > make[2]: `libfrtests.la' is up to date.
 > /Applications/Xcode.app/Contents/Developer/usr/bin/make check-TESTS
 > ../test-driver: line 107: 20092 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tversion
 > dyld: Library not loaded: /usr/local/lib/libquadmath.0.dylib
 >    Referenced from:
 > 
/opt/sw/src/fink.build/libmpfr6-shlibs-4.1.0-1/mpfr-4.1.0/tests/.libs/tversion 

 >
 >    Reason: no suitable image found.  Did find:
 >      /usr/local/lib/libquadmath.0.dylib: code signature in
 > (/usr/local/lib/libquadmath.0.dylib) not valid for use in process using
 > Library Validation: library load disallowed by system policy
 >      /usr/local/lib/libquadmath.0.dylib: code signature in
 > (/usr/local/lib/libquadmath.0.dylib) not valid for use in process using
 > Library Validation: library load disallowed by system policy
 >      /usr/local/lib/libquadmath.0.dylib: code signature in
 > (/usr/local/lib/libquadmath.0.dylib) not valid for use in process using
 > Library Validation: library load disallowed by system policy
 > ../test-driver: line 107: 20113 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tabort_prec_max
 > ../test-driver: line 107: 20132 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tassert
 > ../test-driver: line 107: 20152 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tabort_defalloc1
 > ../test-driver: line 107: 20172 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tabort_defalloc2
 > ../test-driver: line 107: 20191 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: talloc
 > ../test-driver: line 107: 20210 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tinternals
 > ../test-driver: line 107: 20231 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tinits
 > ../test-driver: line 107: 20250 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tisqrt
 >
 > --SNIP---
 >
 > ../test-driver: line 107: 23355 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: ttotal_order
 > ../test-driver: line 107: 23375 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: ttrunc
 > ../test-driver: line 107: 23394 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tui_div
 > ../test-driver: line 107: 23413 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tui_pow
 > ../test-driver: line 107: 23432 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tui_sub
 > ../test-driver: line 107: 23451 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: turandom
 > ../test-driver: line 107: 23470 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tvalist
 > ../test-driver: line 107: 23489 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: ty0
 > ../test-driver: line 107: 23508 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: ty1
 > ../test-driver: line 107: 23527 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tyn
 > ../test-driver: line 107: 23546 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tzeta
 > ../test-driver: line 107: 23565 Abort trap: 6           "$@" > $log_file
 > 2>&1
 > FAIL: tzeta_ui
 > 
============================================================================ 

 >
 > Testsuite summary for MPFR 4.1.0
 > 
============================================================================ 

 >
 > # TOTAL: 183
 > # PASS:  0
 > # SKIP:  0
 > # XFAIL: 0
 > # FAIL:  183
 > # XPASS: 0
 > # ERROR: 0
 > 
============================================================================ 

 >
 > See tests/test-suite.log
 > 
============================================================================ 

 >
 > make[3]: *** [test-suite.log] Error 1
 > make[2]: *** [check-TESTS] Error 2
 > make[1]: *** [check-am] Error 2
 > make: *** [check-recursive] Error 1
 > ### execution of /tmp/fink.yktyC failed, exit code 2
 > ### execution of /tmp/fink.0D6Yq failed, exit code 2
 > Removing runtime build-lock...
 > Removing build-lock package...
 > /opt/sw/bin/dpkg-lockwait -r fink-buildlock-libmpfr6-shlibs-4.1.0-1
 > (Reading database ... 10231 files and directories currently installed.)
 > Removing fink-buildlock-libmpfr6-shlibs-4.1.0-1 ...
 > Failed: phase compiling: libmpfr6-shlibs-4.1.0-1 failed
 >
 > Before reporting any errors, please run "fink selfupdate" and try again.
 >
 > If you continue to have issues, please check to see if the FAQ on Fink's
 > website solves the problem.  If not, ask on one (not both, please) of
 > these mailing lists:
 >
 >      The Fink Users List <[email protected]>
 >      The Fink Beginners List <[email protected]>,
 >
 > with a carbon copy to the maintainer:
 >
 >   David Fang <[email protected]>
 >
 > Note that this is preferable to emailing just the maintainer directly,
 > since most fink package maintainers do not have access to all possible
 > hardware and software configurations.
 >
 > Please try to include the complete error message in your report. This
 > generally consists of a compiler line starting with e.g. "gcc" or "g++"
 > followed by the actual error output from the compiler.
 >
 > Also include the following system information:
 > Package manager version: 0.45.2
 > Distribution version: selfupdate-rsync Sat Oct 24 20:48:37 2020, 10.15,
 > x86_64
 > Trees: local/main stable/main
 > Xcode.app: 12.1
 > Xcode command-line tools: 12.1.0.0.1.1602137645
 > Max. Fink build jobs:  1

It looks like you have some third-party compiler or library installed 
into /usr/local that's corrupting the libmpfr build (not yet at gcc10). 
Rename /usr/local/lib temporarily while building and the issue should 
hopefully go away.

Hanspeter

-- 
Ad Astra


_______________________________________________
Fink-beginners mailing list
[email protected]
List archive:
https://sourceforge.net/p/fink/mailman/fink-users/
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-beginners