Re: Catalina and XCODE12.1 gcc10 install fails

miller <[email protected]>
Newsgroups gmane.os.apple.fink.beginners
Message-ID <[email protected]> 
Thank you that solved the Problem.

Heinz

Am 25.10.20 um 11:24 schrieb Hanspeter Niederstrasser:
>
> On 10/25/20 4:34 AM, miller wrote:
> > Dear all,
> >
> > gcc10 install fails....
> >
> >      gcc -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DLT_OBJDIR=\".libs/\"
> > -DHAVE_LITTLE_ENDIAN=1 -DHAVE_CLOCK_GETTIME=1 -DTIME_WITH_SYS_TIME=1
> > -DHAVE_LOCALE_H=1 -DHAVE_WCHAR_H=1 -DHAVE_STDARG=1 -DHAVE_SYS_TIME_H=1
> > -DHAVE_STRUCT_LCONV_DECIMAL_POINT=1 -DHAVE_STRUCT_LCONV_THOUSANDS_SEP=1
> > -DHAVE_ALLOCA_H=1 -DHAVE_ALLOCA=1 -DHAVE_UINTPTR_T=1 -DHAVE_VA_COPY=1
> > -DHAVE_SETLOCALE=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_SIGNAL=1
> > -DHAVE_SIGACTION=1 -DHAVE_LONG_LONG=1 -DHAVE_INTMAX_T=1
> > -DMPFR_HAVE_INTMAX_MAX=1 -DMPFR_HAVE_NORETURN=1
> > -DMPFR_HAVE_BUILTIN_UNREACHABLE=1 -DMPFR_HAVE_CONSTRUCTOR_ATTR=1
> > -DMPFR_HAVE_FESETROUND=1 -DHAVE_SUBNORM_DBL=1 -DHAVE_SUBNORM_FLT=1
> > -DHAVE_SIGNEDZ=1 -DHAVE_ROUND=1 -DHAVE_TRUNC=1 -DHAVE_FLOOR=1
> > -DHAVE_CEIL=1 -DHAVE_NEARBYINT=1 -DHAVE_DOUBLE_IEEE_LITTLE_ENDIAN=1
> > -DHAVE_LDOUBLE_IEEE_EXT_LITTLE=1 -DMPFR_USE_THREAD_SAFE=1
> > -DMPFR_USE_C11_THREAD_SAFE=1 -DMPFR_USE_STATIC_ASSERT=1
> > -DHAVE_ATTRIBUTE_MODE=1 -DPRINTF_L=1 -DPRINTF_T=1 -DPRINTF_GROUPFLAG=1
> > -DHAVE___GMPN_SBPI1_DIVAPPR_Q=1 -DHAVE___GMPN_INVERT_LIMB=1
> > -DHAVE___GMPN_RSBLSH1_N=1 -DMPFR_LONG_WITHIN_LIMB=1
> > -DMPFR_INTMAX_WITHIN_LIMB=1 -DHAVE_GETRUSAGE=1 -I. -DSRCDIR='"."'
> > -I../src -I../src -I/opt/sw/include  -Wall -Wmissing-prototypes
> > -Wpointer-arith -fno-stack-check -MT tzeta_ui.o -MD -MP -MF 
> $depbase.Tpo
> > -c -o tzeta_ui.o tzeta_ui.c &&\
> >      mv -f $depbase.Tpo $depbase.Po
> > /bin/sh ../libtool  --tag=CC   --mode=link gcc  -Wall
> > -Wmissing-prototypes -Wpointer-arith -fno-stack-check -no-install
> > -L../src/.libs -Wl,-search_paths_first -L/opt/sw/lib -o tzeta_ui
> > tzeta_ui.o libfrtests.la -lm -lquadmath ../src/libmpfr.la -lgmp
> > libtool: warning: '-no-install' is ignored for 
> x86_64-apple-darwin19.6.0
> > libtool: warning: assuming '-no-fast-install' instead
> > libtool: link: gcc -Wall -Wmissing-prototypes -Wpointer-arith
> > -fno-stack-check -Wl,-search_paths_first -o .libs/tzeta_ui tzeta_ui.o
> > -L../src/.libs -L/opt/sw/lib ./.libs/libfrtests.a
> > /usr/local/lib/libquadmath.dylib -lm ../src/.libs/libmpfr.dylib
> > /opt/sw/lib/gmp5/libgmp.dylib
> > make[2]: `libfrtests.la' is up to date.
> > /Applications/Xcode.app/Contents/Developer/usr/bin/make check-TESTS
> > ../test-driver: line 107: 20092 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tversion
> > dyld: Library not loaded: /usr/local/lib/libquadmath.0.dylib
> >    Referenced from:
> > 
> /opt/sw/src/fink.build/libmpfr6-shlibs-4.1.0-1/mpfr-4.1.0/tests/.libs/tversion 
>
> >
> >    Reason: no suitable image found.  Did find:
> >      /usr/local/lib/libquadmath.0.dylib: code signature in
> > (/usr/local/lib/libquadmath.0.dylib) not valid for use in process using
> > Library Validation: library load disallowed by system policy
> >      /usr/local/lib/libquadmath.0.dylib: code signature in
> > (/usr/local/lib/libquadmath.0.dylib) not valid for use in process using
> > Library Validation: library load disallowed by system policy
> >      /usr/local/lib/libquadmath.0.dylib: code signature in
> > (/usr/local/lib/libquadmath.0.dylib) not valid for use in process using
> > Library Validation: library load disallowed by system policy
> > ../test-driver: line 107: 20113 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tabort_prec_max
> > ../test-driver: line 107: 20132 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tassert
> > ../test-driver: line 107: 20152 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tabort_defalloc1
> > ../test-driver: line 107: 20172 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tabort_defalloc2
> > ../test-driver: line 107: 20191 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: talloc
> > ../test-driver: line 107: 20210 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tinternals
> > ../test-driver: line 107: 20231 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tinits
> > ../test-driver: line 107: 20250 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tisqrt
> >
> > --SNIP---
> >
> > ../test-driver: line 107: 23355 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: ttotal_order
> > ../test-driver: line 107: 23375 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: ttrunc
> > ../test-driver: line 107: 23394 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tui_div
> > ../test-driver: line 107: 23413 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tui_pow
> > ../test-driver: line 107: 23432 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tui_sub
> > ../test-driver: line 107: 23451 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: turandom
> > ../test-driver: line 107: 23470 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tvalist
> > ../test-driver: line 107: 23489 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: ty0
> > ../test-driver: line 107: 23508 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: ty1
> > ../test-driver: line 107: 23527 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tyn
> > ../test-driver: line 107: 23546 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tzeta
> > ../test-driver: line 107: 23565 Abort trap: 6           "$@" > 
> $log_file
> > 2>&1
> > FAIL: tzeta_ui
> > 
> ============================================================================ 
>
> >
> > Testsuite summary for MPFR 4.1.0
> > 
> ============================================================================ 
>
> >
> > # TOTAL: 183
> > # PASS:  0
> > # SKIP:  0
> > # XFAIL: 0
> > # FAIL:  183
> > # XPASS: 0
> > # ERROR: 0
> > 
> ============================================================================ 
>
> >
> > See tests/test-suite.log
> > 
> ============================================================================ 
>
> >
> > make[3]: *** [test-suite.log] Error 1
> > make[2]: *** [check-TESTS] Error 2
> > make[1]: *** [check-am] Error 2
> > make: *** [check-recursive] Error 1
> > ### execution of /tmp/fink.yktyC failed, exit code 2
> > ### execution of /tmp/fink.0D6Yq failed, exit code 2
> > Removing runtime build-lock...
> > Removing build-lock package...
> > /opt/sw/bin/dpkg-lockwait -r fink-buildlock-libmpfr6-shlibs-4.1.0-1
> > (Reading database ... 10231 files and directories currently installed.)
> > Removing fink-buildlock-libmpfr6-shlibs-4.1.0-1 ...
> > Failed: phase compiling: libmpfr6-shlibs-4.1.0-1 failed
> >
> > Before reporting any errors, please run "fink selfupdate" and try 
> again.
> >
> > If you continue to have issues, please check to see if the FAQ on 
> Fink's
> > website solves the problem.  If not, ask on one (not both, please) of
> > these mailing lists:
> >
> >      The Fink Users List <[email protected]>
> >      The Fink Beginners List <[email protected]>,
> >
> > with a carbon copy to the maintainer:
> >
> >   David Fang <[email protected]>
> >
> > Note that this is preferable to emailing just the maintainer directly,
> > since most fink package maintainers do not have access to all possible
> > hardware and software configurations.
> >
> > Please try to include the complete error message in your report. This
> > generally consists of a compiler line starting with e.g. "gcc" or "g++"
> > followed by the actual error output from the compiler.
> >
> > Also include the following system information:
> > Package manager version: 0.45.2
> > Distribution version: selfupdate-rsync Sat Oct 24 20:48:37 2020, 10.15,
> > x86_64
> > Trees: local/main stable/main
> > Xcode.app: 12.1
> > Xcode command-line tools: 12.1.0.0.1.1602137645
> > Max. Fink build jobs:  1
>
> It looks like you have some third-party compiler or library installed 
> into /usr/local that's corrupting the libmpfr build (not yet at 
> gcc10). Rename /usr/local/lib temporarily while building and the issue 
> should hopefully go away.
>
> Hanspeter
>
-- 
Prof. Dr. Heinrich Miller
Helmholtz Professor for Glaciology
Alfred-Wegener-Institute
27568 Bremerhaven
mailto:[email protected]
Phone: 	+49 471 48311210
Mobile:	+49 170 9136994
Fax: 	+49 471 48311149



_______________________________________________
Fink-beginners mailing list
[email protected]
List archive:
https://sourceforge.net/p/fink/mailman/fink-users/
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-beginners
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.