eCos port on mini2440

Hi,

I'm trying to work on eCos using mini2440. So far i started with redboot and
i'm able to boot redboot from NAND flash.

But after starting redboot in NAND flash while doing initial setup i m
facing below issues;

1. While trying to create Redboot partitions i m getting "Can't find empty
slot in FIS directory" error and not able to create partition.

2. When ever i tried fconfig -i or fis init. Redboot is not booting after
reset looks like these commands erasing redboot?

I have already tried and put so much efforts but not able to reoslve above
issues. Please help me out with above issues.

Many many thanks in advance.
Suresh






--
View this message in context: http://sourceware-org.1504.n7.nabble.com/eCos-port-on-mini2440-tp259113.html
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss