RPi4B buildworld buildkernel times for already installed system being -mcpu=cortex-a72 vs. -mcpu=cortex-a53 based

The following are from scratch buildworld buildkernel rebuilds
on a RPi4B (head -r363590 context).

ENVIRONMENT: -mcpu=cortex-a72 based world and kernel running already, RPi4B @ 2G Hz,
Restricted to 3 GiByte RAM, -j3:

World built in 37469 seconds, ncpu: 4, make -j3
Kernel(s)  GENERIC-NODBG built in 2474 seconds, ncpu: 4, make -j3

ENVIRONMENT: -mcpu=cortex-a53 based kernel running, RPi4B @ 2G Hz,
Restricted to 3 GiByte RAM, -j3:

World built in 44034 seconds, ncpu: 4, make -j3
Kernel(s)  GENERIC-NODBG built in 2895 seconds, ncpu: 4, make -j3

So a little under 11.1 hr total vs. a little over 13.0 hr total,
a somewhat over 50 min improvement.

(A xhci patch finally allowed me to boot -mcpu=cortex-a72
based kernel builds on the RPi4B: The xhci event ring
initialization code was missing a usb_bus_mem_flush_all
call previously.)


Supporting details:

(e-mail based spacing changes expected below)

# diff -u ~/src.configs/src.conf.cortexA72-clang-bootstrap.aarch64-host ~/src.configs/src.conf.cortexA53-clang-bootstrap.aarch64-host
--- /root/src.configs/src.conf.cortexA72-clang-bootstrap.aarch64-host	2020-03-13 22:29:25.470155000 -0700
+++ /root/src.configs/src.conf.cortexA53-clang-bootstrap.aarch64-host	2020-03-13 22:29:25.469455000 -0700
@@ -49,9 +49,9 @@
 # Use of the .clang 's here avoids
 # interfering with other C<?>FLAGS
 # usage, such as ?= usage.
-CFLAGS.clang+= -mcpu=cortex-a72
-CXXFLAGS.clang+= -mcpu=cortex-a72
-CPPFLAGS.clang+= -mcpu=cortex-a72
-ACFLAGS.arm64cpuid.S+=  -mcpu=cortex-a72+crypto
-ACFLAGS.aesv8-armx.S+=  -mcpu=cortex-a72+crypto
-ACFLAGS.ghashv8-armx.S+=        -mcpu=cortex-a72+crypto
+CFLAGS.clang+= -mcpu=cortex-a53
+CXXFLAGS.clang+= -mcpu=cortex-a53
+CPPFLAGS.clang+= -mcpu=cortex-a53
+ACFLAGS.arm64cpuid.S+=  -mcpu=cortex-a53+crypto
+ACFLAGS.aesv8-armx.S+=  -mcpu=cortex-a53+crypto
+ACFLAGS.ghashv8-armx.S+=        -mcpu=cortex-a53+crypto


The .amd64-host files are similar for doing cross builds.

I also use += in secure/lib/libcrypto/Makefile :

# svnlite diff /usr/src/secure/lib/libcrypto/Makefile
Index: /usr/src/secure/lib/libcrypto/Makefile
===================================================================
--- /usr/src/secure/lib/libcrypto/Makefile	(revision 365919)
+++ /usr/src/secure/lib/libcrypto/Makefile	(working copy)
@@ -20,7 +20,7 @@
 SRCS+=	o_str.c o_time.c threads_pthread.c uid.c
 .if defined(ASM_aarch64)
 SRCS+=	arm64cpuid.S armcap.c
-ACFLAGS.arm64cpuid.S=	-march=armv8-a+crypto
+ACFLAGS.arm64cpuid.S+=	-march=armv8-a+crypto
 .elif defined(ASM_amd64)
 SRCS+=	x86_64cpuid.S
 .elif defined(ASM_arm)
@@ -35,7 +35,7 @@
 SRCS+=	aes_cbc.c aes_cfb.c aes_ecb.c aes_ige.c aes_misc.c aes_ofb.c aes_wrap.c
 .if defined(ASM_aarch64)
 SRCS+=	aes_core.c aesv8-armx.S vpaes-armv8.S
-ACFLAGS.aesv8-armx.S=	-march=armv8-a+crypto
+ACFLAGS.aesv8-armx.S+=	-march=armv8-a+crypto
 .elif defined(ASM_amd64)
 SRCS+=	aes_core.c aesni-mb-x86_64.S aesni-sha1-x86_64.S aesni-sha256-x86_64.S
 SRCS+=	aesni-x86_64.S vpaes-x86_64.S
@@ -242,7 +242,7 @@
 SRCS+=	ofb128.c wrap128.c xts128.c
 .if defined(ASM_aarch64)
 SRCS+=	ghashv8-armx.S
-ACFLAGS.ghashv8-armx.S=	-march=armv8-a+crypto
+ACFLAGS.ghashv8-armx.S+=	-march=armv8-a+crypto
 .elif defined(ASM_amd64)
 SRCS+=	aesni-gcm-x86_64.S ghash-x86_64.S
 .elif defined(ASM_arm)

The RPi4B is using:

over_voltage=6
arm_freq=2000

and was booted via uefi/ACPI.

I have not repeated the -j4 or other -jN comparisons that
I reported in the past. The -mcpu=cortex-a53 figures are
from the past.


===
Mark Millard
marklmi at yahoo.com
( dsl-only.net went
away in early 2018-Mar)

_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "[email protected]"