Re: RPi4B buildworld buildkernel times for already installed system being -mcpu=cortex-a72 vs. -mcpu=cortex-a53 based

On 2020-Sep-20, at 18:32, Mark Millard <marklmi at yahoo.com> wrote:

> The following are from scratch buildworld buildkernel rebuilds
> on a RPi4B (head -r363590 context).
> 
> ENVIRONMENT: -mcpu=cortex-a72 based world and kernel running already, RPi4B @ 2G Hz,
> Restricted to 3 GiByte RAM, -j3:
> 
> World built in 37469 seconds, ncpu: 4, make -j3
> Kernel(s)  GENERIC-NODBG built in 2474 seconds, ncpu: 4, make -j3
> 
> ENVIRONMENT: -mcpu=cortex-a53 based kernel running, RPi4B @ 2G Hz,
> Restricted to 3 GiByte RAM, -j3:
> 
> World built in 44034 seconds, ncpu: 4, make -j3
> Kernel(s)  GENERIC-NODBG built in 2895 seconds, ncpu: 4, make -j3
> 
> So a little under 11.1 hr total vs. a little over 13.0 hr total,
> a somewhat over 50 min improvement.

"a somewhat over 1hr 50 min improvement" is what I should have
managed to type.

> (A xhci patch finally allowed me to boot -mcpu=cortex-a72
> based kernel builds on the RPi4B: The xhci event ring
> initialization code was missing a usb_bus_mem_flush_all
> call previously.)
> 
> 
> Supporting details:
> 
> (e-mail based spacing changes expected below)
> 
> # diff -u ~/src.configs/src.conf.cortexA72-clang-bootstrap.aarch64-host ~/src.configs/src.conf.cortexA53-clang-bootstrap.aarch64-host
> --- /root/src.configs/src.conf.cortexA72-clang-bootstrap.aarch64-host	2020-03-13 22:29:25.470155000 -0700
> +++ /root/src.configs/src.conf.cortexA53-clang-bootstrap.aarch64-host	2020-03-13 22:29:25.469455000 -0700
> @@ -49,9 +49,9 @@
> # Use of the .clang 's here avoids
> # interfering with other C<?>FLAGS
> # usage, such as ?= usage.
> -CFLAGS.clang+= -mcpu=cortex-a72
> -CXXFLAGS.clang+= -mcpu=cortex-a72
> -CPPFLAGS.clang+= -mcpu=cortex-a72
> -ACFLAGS.arm64cpuid.S+=  -mcpu=cortex-a72+crypto
> -ACFLAGS.aesv8-armx.S+=  -mcpu=cortex-a72+crypto
> -ACFLAGS.ghashv8-armx.S+=        -mcpu=cortex-a72+crypto
> +CFLAGS.clang+= -mcpu=cortex-a53
> +CXXFLAGS.clang+= -mcpu=cortex-a53
> +CPPFLAGS.clang+= -mcpu=cortex-a53
> +ACFLAGS.arm64cpuid.S+=  -mcpu=cortex-a53+crypto
> +ACFLAGS.aesv8-armx.S+=  -mcpu=cortex-a53+crypto
> +ACFLAGS.ghashv8-armx.S+=        -mcpu=cortex-a53+crypto
> 
> 
> The .amd64-host files are similar for doing cross builds.
> 
> I also use += in secure/lib/libcrypto/Makefile :
> 
> # svnlite diff /usr/src/secure/lib/libcrypto/Makefile
> Index: /usr/src/secure/lib/libcrypto/Makefile
> ===================================================================
> --- /usr/src/secure/lib/libcrypto/Makefile	(revision 365919)
> +++ /usr/src/secure/lib/libcrypto/Makefile	(working copy)
> @@ -20,7 +20,7 @@
> SRCS+=	o_str.c o_time.c threads_pthread.c uid.c
> .if defined(ASM_aarch64)
> SRCS+=	arm64cpuid.S armcap.c
> -ACFLAGS.arm64cpuid.S=	-march=armv8-a+crypto
> +ACFLAGS.arm64cpuid.S+=	-march=armv8-a+crypto
> .elif defined(ASM_amd64)
> SRCS+=	x86_64cpuid.S
> .elif defined(ASM_arm)
> @@ -35,7 +35,7 @@
> SRCS+=	aes_cbc.c aes_cfb.c aes_ecb.c aes_ige.c aes_misc.c aes_ofb.c aes_wrap.c
> .if defined(ASM_aarch64)
> SRCS+=	aes_core.c aesv8-armx.S vpaes-armv8.S
> -ACFLAGS.aesv8-armx.S=	-march=armv8-a+crypto
> +ACFLAGS.aesv8-armx.S+=	-march=armv8-a+crypto
> .elif defined(ASM_amd64)
> SRCS+=	aes_core.c aesni-mb-x86_64.S aesni-sha1-x86_64.S aesni-sha256-x86_64.S
> SRCS+=	aesni-x86_64.S vpaes-x86_64.S
> @@ -242,7 +242,7 @@
> SRCS+=	ofb128.c wrap128.c xts128.c
> .if defined(ASM_aarch64)
> SRCS+=	ghashv8-armx.S
> -ACFLAGS.ghashv8-armx.S=	-march=armv8-a+crypto
> +ACFLAGS.ghashv8-armx.S+=	-march=armv8-a+crypto
> .elif defined(ASM_amd64)
> SRCS+=	aesni-gcm-x86_64.S ghash-x86_64.S
> .elif defined(ASM_arm)
> 
> The RPi4B is using:
> 
> over_voltage=6
> arm_freq=2000
> 
> and was booted via uefi/ACPI.
> 
> I have not repeated the -j4 or other -jN comparisons that
> I reported in the past. The -mcpu=cortex-a53 figures are
> from the past.




===
Mark Millard
marklmi at yahoo.com
( dsl-only.net went
away in early 2018-Mar)

_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "[email protected]"