Re: RPi4b 8GB 13.0-Current, XHCI broken, wrong U-Boot ?

I would be grateful to you if you
could test : : https://reviews.freebsd.org/D26853
because
your issue  ---Bus xhci_pci: probe failed, error -110 disappear—
will be fixed with it .
If you don’t know how to compile the dts,
I could send you a compiled one , but better you do it yourself:
> dtc -I dts -O dtb -o bcm2711-rpi-4-b.dtb bcm2711-rpi-4-b.dts


Thanks in advance
Klaus

> Am 02.01.2021 um 12:08 schrieb Andy McClements <[email protected]>:
> 
> On 01/01/2021 19:27, Andy McClements wrote:
>> …...
> Bus xhci_pci: probe failed, error -110
> No working controllers found
> USB is stopped. Please issue 'usb start' first.
> starting USB...
> Bus xhci_pci: probe failed, error -110
> No working controllers found
> "Synchronous Abort" handler, esr 0x96000044
> elr: 000000000009bd2c lr : 0000000000091a10 (reloc)
> elr: 000000003b278d2c lr : 000000003b26ea10
> x0 : 0000000000000000 x1 : b900080152b00000
> x2 : 003aeea8f0000000 x3 : 0000000000000000
> x4 : 000000003b2d30b0 x5 : 000000003aeea920
> x6 : 0000000000000021 x7 : 656c696674646603
> x8 : 0000000000000000 x9 : 0000000000000008
> x10: 00000000ffffffd0 x11: 0000000000000006
> x12: 000000000001869f x13: 00000000000069cc
> x14: 0000000000000000 x15: 00000000fffffffe
> x16: 0000000000004110 x17: 0000000000000000
> x18: 000000003ae58d90 x19: 000000003b2d30b0
> x20: 0000000000000030 x21: 0000000000000001
> x22: 00000000ffffffff x23: 000000000000000b
> x24: 000000003b2bf8ef x25: 000000003b2c7ad6
> x26: 0000000000000001 x27: 0000000000000020
> x28: 000000003b2e4e94 x29: 000000003ae4c3e0
> 
> Code: f9400c02 927ef421 f9000c62 8b010001 (f9000843)
> Resetting CPU ...
> 
> resetting ...
> 
> </quote>
> 
> 
> 
> 
> 
> (With SD card)
>> <quote>
>> U-Boot 2020.10 (Dec 24 2020 - 04:18:29 +0000)
>> 
>> DRAM:  7.9 GiB
>> RPI 4 Model B (0xd03114)
>> MMC:   mmc@7e300000: 1, emmc2@7e340000: 0
>> Loading Environment from FAT... In:    serial
>> Out:   vidconsole
>> Err:   vidconsole
>> Net:   eth0: ethernet@7d580000
>> PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
>> starting USB...
>> Bus xhci_pci: probe failed, error -110
>> No working controllers found
>> Hit any key to stop autoboot:  0
>> "Synchronous Abort" handler, esr 0x96000004
>> elr: 000000000009c0c8 lr : 0000000000092194 (reloc)
>> elr: 000000003b3790c8 lr : 000000003b36f194
>> x0 : d519b040aa010000 x1 : 000000000000005c
>> x2 : 0000000000800000 x3 : 000000003b3d3670
>> x4 : b900080152b00000 x5 : 000000000000005c
>> x6 : 000000003b3d3670 x7 : b900080152afff90
>> x8 : 0000000000000000 x9 : 0000000000000008
>> x10: 00000000ffffffd0 x11: 0000000000000006
>> x12: 000000000001869f x13: 000000000000adcc
>> x14: 000000003af4ce38 x15: 0000000000000002
>> x16: 0000000000004110 x17: 0000000000000000
>> x18: 000000003af58d90 x19: 000000003b3d30b0
>> x20: 0000000000000070 x21: 000000000000006d
>> x22: 000000000000000a x23: 0000000000000005
>> x24: 000000003b3bf8ef x25: 000000003b3c7ad6
>> x26: 0000000000000000 x27: 000000000000006d
>> x28: 000000003b3e4e94 x29: 000000003af4c100
>> 
>> Code: eb03005f 54ffff43 f9400ca4 17ffffe0 (f9400404)
>> Resetting CPU ...
>> 
>> resetting ...
>> 
>> </quote>
>> 
>> 
>> _______________________________________________
>> [email protected] mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> To unsubscribe, send any mail to "[email protected]"
> 
> _______________________________________________
> [email protected] mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "[email protected]"

_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "[email protected]"