Re: Mountroot problems on RPi3/aarch64
bob prohaska <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On Sat, Jun 11, 2022 at 06:52:42PM -0700, Mark Millard wrote:
> There was another UFS/FFS superblock integrity-check fix today.
> Time to try again?
>
> The fix was . . .
>
> The branch main has been updated by mckusick:
>
> URL: https://cgit.FreeBSD.org/src/commit/?id=800a53b445e7eb113ba193b1ac98631299178529
>
There still seems to be something wrong. It looked like git picked up the
change, but after a build/install cycle I'm still seeing:
.....
Root mount waiting for: CAM
Root mount waiting for: CAM
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <ASMT ASM105x 0> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 12345678D558
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Mounting from ufs:/dev/da0s2a failed with error 22; retrying for 3 more seconds
Mounting from ufs:/dev/da0s2a failed with error 22: Invalid fstype.
Loader variables:
vfs.root.mountfrom=ufs:/dev/da0s2a
vfs.root.mountfrom.options=rw
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:zroot/ROOT/default
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot> ufs:/dev/da0s2a
Trying to mount root from ufs:/dev/da0s2a []...
Mounting from ufs:/dev/da0s2a failed with error 22; retrying for 3 more seconds
Mounting from ufs:/dev/da0s2a failed with error 22: Invalid fstype.
As earlier, hitting [enter] at the mountroot> prompt starts the debugger.
Booting a kernel from main-n255816-e26ef41f799 goes straight to single-user:
OK boot kernel.0529
Loading kernel...
/boot/kernel.0529/kernel text=0x2a8 text=0x82ccb0 text=0x24c4a4 data=0x1b9f38 data=0x0+0x34e000 syms=[0x8+0x132f18+0x8+0x15ac23]
Loading configured modules...
/boot/kernel.0529/filemon.ko text=0x1867 text=0x19b8 data=0x510+0x20 syms=[0x8+0xd38+0x8+0x7ea]
/boot/kernel.0529/umodem.ko text=0x20e0 text=0x1360 data=0x6d8+0x4 syms=[0x8+0xee8+0x8+0xb46]
/boot/entropy size=0x1000
/etc/hostid size=0x25
Using DTB provided by EFI at 0x7ef5000.
EFI framebuffer information:
addr, size 0x3eaf0000, 0x10a800
dimensions 656 x 416
stride 656
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
---<<BOOT>>---
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
Copyright (c) 1992-2022 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #74 main-n255816-e26ef41f799: Wed May 25 15:05:14 PDT 2022
[email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 14.0.3 (https://github.com/llvm/llvm-project.git llvmorg-14.0.3-0-g1f9140064dfb)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 656x416
module firmware already present!
KLD file umodem.ko is missing dependencies
real memory = 993984512 (947 MB)
avail memory = 944148480 (900 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 39f34000 mode 2 pages 1
MAP 39f38000 mode 2 pages 3
MAP 39f3c000 mode 2 pages 4
MAP 3b350000 mode 2 pages 16
MAP 3f100000 mode 0 pages 1
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
gpiobus1: <GPIO bus> on gpio1
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 9 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 11 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 19 on simplebus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0
usbus1 on bcm283x_dwcotg0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0
bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7e104000-0x7e10400f irq 40 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 48 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
gpioc1: <GPIO controller> on gpio1
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 656x416(656x416@0,0) 32bpp
fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584
pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
lock order reversal: (sleepable after non-sleepable)
1st 0xffff000000c49aa0 LED mtx (LED mtx, sleep mutex) @ /usr/src/sys/dev/led/led.c:298
2nd 0xffffa00000dc1c10 Raspberry Pi firmware gpio (Raspberry Pi firmware gpio, sx) @ /usr/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:252
lock order LED mtx -> Raspberry Pi firmware gpio attempted at:
#0 0xffff0000004c9024 at witness_checkorder+0xadc
#1 0xffff000000464638 at _sx_xlock+0x7c
#2 0xffff0000007e1e3c at rpi_fw_gpio_pin_set+0xe8
#3 0xffff0000001c9378 at led_create_state+0x158
#4 0xffff0000001950ec at gpioled_attach+0x290
#5 0xffff000000494328 at device_attach+0x3f8
#6 0xffff000000493e98 at device_probe_and_attach+0x7c
#7 0xffff0000004961e4 at bus_generic_new_pass+0xfc
#8 0xffff000000496194 at bus_generic_new_pass+0xac
#9 0xffff000000496194 at bus_generic_new_pass+0xac
#10 0xffff00000049110c at bus_set_pass+0x4c
#11 0xffff0000003e2ab0 at mi_startup+0x1fc
#12 0xffff0000000008b8 at virtdone+0x7c
uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks held:
exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298
stack backtrace:
#0 0xffff0000004c9470 at witness_debugger+0x5c
#1 0xffff0000004ca66c at witness_warn+0x400
#2 0xffff0000006f8224 at uma_zalloc_debug+0x30
#3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c
#4 0xffff00000042e230 at malloc+0x94
#5 0xffff0000007d70a8 at bcm2835_firmware_property+0x44
#6 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100
#7 0xffff0000001c9378 at led_create_state+0x158
#8 0xffff0000001950ec at gpioled_attach+0x290
#9 0xffff000000494328 at device_attach+0x3f8
#10 0xffff000000493e98 at device_probe_and_attach+0x7c
#11 0xffff0000004961e4 at bus_generic_new_pass+0xfc
#12 0xffff000000496194 at bus_generic_new_pass+0xac
#13 0xffff000000496194 at bus_generic_new_pass+0xac
#14 0xffff00000049110c at bus_set_pass+0x4c
#15 0xffff0000003e2ab0 at mi_startup+0x1fc
#16 0xffff0000000008b8 at virtdone+0x7c
uma_zalloc_debug: zone "malloc-16" with the following non-sleepable locks held:
exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298
stack backtrace:
#0 0xffff0000004c9470 at witness_debugger+0x5c
#1 0xffff0000004ca66c at witness_warn+0x400
#2 0xffff0000006f8224 at uma_zalloc_debug+0x30
#3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c
#4 0xffff00000042e230 at malloc+0x94
#5 0xffff000000742d88 at bounce_bus_dmamem_alloc+0x50
#6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc
#7 0xffff0000007d70dc at bcm2835_firmware_property+0x78
#8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100
#9 0xffff0000001c9378 at led_create_state+0x158
#10 0xffff0000001950ec at gpioled_attach+0x290
#11 0xffff000000494328 at device_attach+0x3f8
#12 0xffff000000493e98 at device_probe_and_attach+0x7c
#13 0xffff0000004961e4 at bus_generic_new_pass+0xfc
#14 0xffff000000496194 at bus_generic_new_pass+0xac
#15 0xffff000000496194 at bus_generic_new_pass+0xac
#16 0xffff00000049110c at bus_set_pass+0x4c
#17 0xffff0000003e2ab0 at mi_startup+0x1fc
uma_zalloc_debug: zone "malloc-128" with the following non-sleepable locks held:
exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298
stack backtrace:
#0 0xffff0000004c9470 at witness_debugger+0x5c
#1 0xffff0000004ca66c at witness_warn+0x400
#2 0xffff0000006f8224 at uma_zalloc_debug+0x30
#3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c
#4 0xffff00000042e230 at malloc+0x94
#5 0xffff000000742dd8 at bounce_bus_dmamem_alloc+0xa0
#6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc
#7 0xffff0000007d70dc at bcm2835_firmware_property+0x78
#8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100
#9 0xffff0000001c9378 at led_create_state+0x158
#10 0xffff0000001950ec at gpioled_attach+0x290
#11 0xffff000000494328 at device_attach+0x3f8
#12 0xffff000000493e98 at device_probe_and_attach+0x7c
#13 0xffff0000004961e4 at bus_generic_new_pass+0xfc
#14 0xffff000000496194 at bus_generic_new_pass+0xac
#15 0xffff000000496194 at bus_generic_new_pass+0xac
#16 0xffff00000049110c at bus_set_pass+0x4c
#17 0xffff0000003e2ab0 at mi_startup+0x1fc
uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks held:
exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298
stack backtrace:
#0 0xffff0000004c9470 at witness_debugger+0x5c
#1 0xffff0000004ca66c at witness_warn+0x400
#2 0xffff0000006f8224 at uma_zalloc_debug+0x30
#3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c
#4 0xffff00000042e230 at malloc+0x94
#5 0xffff000000742e60 at bounce_bus_dmamem_alloc+0x128
#6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc
#7 0xffff0000007d70dc at bcm2835_firmware_property+0x78
#8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100
#9 0xffff0000001c9378 at led_create_state+0x158
#10 0xffff0000001950ec at gpioled_attach+0x290
#11 0xffff000000494328 at device_attach+0x3f8
#12 0xffff000000493e98 at device_probe_and_attach+0x7c
#13 0xffff0000004961e4 at bus_generic_new_pass+0xfc
#14 0xffff000000496194 at bus_generic_new_pass+0xac
#15 0xffff000000496194 at bus_generic_new_pass+0xac
#16 0xffff00000049110c at bus_set_pass+0x4c
#17 0xffff0000003e2ab0 at mi_startup+0x1fc
armv8crypto0: CPU lacks AES instructions
Timecounters tick every 1.000 msec
usbus1: 480Mbps High Speed USB v2.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
ugen1.1: <DWCOTG OTG Root HUB> at usbus1
uhub0 on usbus1
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 64GB <SDHC EC2QT 3.0 SN 529453E5 MFG 08/2019 by 27 SM> at mmc0 50.0MHz/4bit/65535-block
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
Trying to mount root from ufs:/dev/da0s2a [rw]...
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <CRC32,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
Release APs...done
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 1 port with 1 removable, self powered
ugen1.2: <vendor 0x0424 product 0x9514> at usbus1
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus1
uhub1: MTT enabled
Root mount waiting for: usbus1 CAM
uhub1: 5 ports with 4 removable, self powered
ugen1.3: <vendor 0x0424 product 0xec00> at usbus1
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:71:46:4e
Root mount waiting for: usbus1 CAM
ugen1.4: <VIA Labs, Inc. USB2.0 Hub> at usbus1
uhub2 on uhub1
uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.70, addr 4> on usbus1
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1 CAM
Root mount waiting for: usbus1 CAM
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASMT ASM105x (0x174c:0x55aa)
ugen1.5: <ASMT ASM105x> at usbus1
umass0 on uhub2
umass0: <ASMT ASM105x, class 0/0, rev 2.10/1.00, addr 5> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0: Attached to scbus0
ugen1.6: <FTDI FT232R USB UART> at usbus1
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ugen1.5: <ASMT ASM105x> at usbus1 (disconnected)
umass0: at uhub2, port 4, addr 5 (disconnected)
umass0: detached
Root mount waiting for: CAM
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASMT ASM105x (0x174c:0x55aa)
ugen1.5: <ASMT ASM105x> at usbus1
umass0 on uhub2
umass0: <ASMT ASM105x, class 0/0, rev 2.10/1.00, addr 5> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0: Attached to scbus0
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <ASMT ASM105x 0> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 12345678D558
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
Setting hostuuid: 30303030-3030-3030-3064-626136386435.
Setting hostid: 0x5cd40a6a.
Starting file system checks:
Cannot find file system superblock
Cannot find file system superblock
Warning! Some of the devices might not be available; retrying
Restarting file system checks:
Cannot find file system superblock
Cannot find file system superblock
Unknown error 3; help!
ERROR: ABORTING BOOT (sending SIGTERM to parent)!
2022-06-13T08:05:20.701056-07:00 - init 1 - - /bin/sh on /etc/rc terminated abnormally, going to single user mode
Enter full pathname of shell or RETURN for /bin/sh:
root@:/ # uname -a
FreeBSD 14.0-CURRENT FreeBSD 14.0-CURRENT #74 main-n255816-e26ef41f799: Wed May 25 15:05:14 PDT 2022 [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
root@:/ #
root@:/ # fsck
Cannot find file system superblock
Cannot find file system superblock
LOOK FOR ALTERNATE SUPERBLOCKS? no
root@:/ #
root@:/ # fsck -y
Cannot find file system superblock
Cannot find file system superblock
LOOK FOR ALTERNATE SUPERBLOCKS? no
Indeed, it looks as if the -y option of fsck is now gone.....
Yet, somewhat astonishingly:
root@:/ # exit
Setting hostuuid: 30303030-3030-3030-3064-626136386435.
Setting hostid: 0x5cd40a6a.
Fast boot: skipping disk checks.
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/perl5/5.32/mach/CORE /usr/local/llvm10/lib
Setting hostname: www.zefox.org.
Setting up harvesting: [CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
Starting Network: lo0 ue0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
ether b8:27:eb:71:46:4e
inet 50.1.20.28 netmask 0xffffff00 broadcast 50.1.20.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Autoloading module: uftdi.ko
uftdi0 on uhub1
uftdi0: <FT232R USB UART> on usbus1
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add net default: gateway 50.1.20.1
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Updating motd:.
Creating and/or trimming log files.
Updating /var/run/os-release done.
Starting syslogd.
Clearing /tmp (X related).
No core dumps found.
Setting date via ntp.
13 Jun 08:22:48 ntpdate[875]: step time server 86.3.245.8 offset -24453.100209 sec
Mounting late filesystems:.
Starting powerd.
Starting sendmail.
Starting sendmail_msp_queue.
Starting cron.
Performing sanity check on sshd configuration.
Starting sshd.
Configuring vt: blanktime.
Starting background file system checks in 60 seconds.
Mon Jun 13 08:23:00 PDT 2022
FreeBSD/arm64 (www.zefox.org) (ttyu0)
login:
at which point it's possible to run well enough to update and recompile.
Seemingly this is a local problem unique to my systems. In the meantime
I'll try another git pull and recompile....
Thanks for writing!
bob prohaska
> commit 800a53b445e7eb113ba193b1ac98631299178529
> Author: Kirk McKusick <[email protected]>
> AuthorDate: 2022-06-11 18:04:19 +0000
> Commit: Kirk McKusick <[email protected]>
> CommitDate: 2022-06-11 18:05:14 +0000
>
> Bug fix to UFS/FFS superblock integrity checks when reading a superblock.
>
> One of the checks was that the cylinder group size (fs_cgsize)
> matched that calculated by CGSIZE(). The value calculated by CGSIZE()
> has changed over time as the filesystem has evolved. Thus comparing
> the value of CGSIZE() of the current generation filesystem may not
> match the size as computed by CGSIZE() that was in effect at the
> time an older filesystem was created. Therefore the check for
> fs_cgsize is changed to simply ensure that it is not larger than
> the filesystem blocksize (fs_bsize).
>
> Reported by: Martin Birgmeier
> Tested by: Martin Birgmeier
> MFC after: 1 month (with 076002f24d35)
> PR: 264450
> Differential Revision: https://reviews.freebsd.org/D35219
> ---
> sys/ufs/ffs/ffs_subr.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/sys/ufs/ffs/ffs_subr.c b/sys/ufs/ffs/ffs_subr.c
> index f25a6cba12f4..3e31746c2cfc 100644
> --- a/sys/ufs/ffs/ffs_subr.c
> +++ b/sys/ufs/ffs/ffs_subr.c
> @@ -385,7 +385,7 @@ validate_sblock(struct fs *fs, int isaltsblk)
> roundup(howmany(SBLOCKSIZE, fs->fs_fsize), fs->fs_frag) ||
> fs->fs_iblkno != fs->fs_cblkno + fs->fs_frag ||
> fs->fs_dblkno != fs->fs_iblkno + fs->fs_ipg / INOPF(fs) ||
> - fs->fs_cgsize != fragroundup(fs, CGSIZE(fs)))
> + fs->fs_cgsize > fs->fs_bsize)
> return (ENOENT);
> if (fs->fs_csaddr != cgdmin(fs, 0) ||
> fs->fs_cssize !=
>
>
> ===
> Mark Millard
> marklmi at yahoo.com
>
>