Re: Mountroot problems on RPi3/aarch64

On 6/13/22 17:33, bob prohaska wrote:
> On Sat, Jun 11, 2022 at 06:52:42PM -0700, Mark Millard wrote:
>> There was another UFS/FFS superblock integrity-check fix today.
>> Time to try again?
>>
>> The fix was . . .
>>
>> The branch main has been updated by mckusick:
>>
>> URL: https://cgit.FreeBSD.org/src/commit/?id=800a53b445e7eb113ba193b1ac98631299178529
>>
> 
> There still seems to be something wrong. It looked like git picked up the
> change, but after a build/install cycle I'm still seeing:
> 
> .....
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
> da0: <ASMT ASM105x 0> Fixed Direct Access SPC-4 SCSI device
> da0: Serial Number 12345678D558
> da0: 40.000MB/s transfers
> da0: 953869MB (1953525168 512 byte sectors)
> da0: quirks=0x2<NO_6_BYTE>
> Mounting from ufs:/dev/da0s2a failed with error 22; retrying for 3 more seconds
> Mounting from ufs:/dev/da0s2a failed with error 22: Invalid fstype.
> 
> Loader variables:
>    vfs.root.mountfrom=ufs:/dev/da0s2a
>    vfs.root.mountfrom.options=rw
> 
> Manual root filesystem specification:
>    <fstype>:<device> [options]
>        Mount <device> using filesystem <fstype>
>        and with the specified (optional) option list.
> 
>      eg. ufs:/dev/da0s1a
>          zfs:zroot/ROOT/default
>          cd9660:/dev/cd0 ro
>            (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
> 
>    ?               List valid disk boot devices
>    .               Yield 1 second (for background tasks)
>    <empty line>    Abort manual input
> 
> mountroot> ufs:/dev/da0s2a
> Trying to mount root from ufs:/dev/da0s2a []...
> Mounting from ufs:/dev/da0s2a failed with error 22; retrying for 3 more seconds
> Mounting from ufs:/dev/da0s2a failed with error 22: Invalid fstype.
> 
> As earlier, hitting [enter] at the mountroot> prompt starts the debugger.
> 
> Booting a kernel from main-n255816-e26ef41f799 goes straight to single-user:
> 
> OK boot kernel.0529
> Loading kernel...
> /boot/kernel.0529/kernel text=0x2a8 text=0x82ccb0 text=0x24c4a4 data=0x1b9f38 data=0x0+0x34e000 syms=[0x8+0x132f18+0x8+0x15ac23]
> Loading configured modules...
> /boot/kernel.0529/filemon.ko text=0x1867 text=0x19b8 data=0x510+0x20 syms=[0x8+0xd38+0x8+0x7ea]
> /boot/kernel.0529/umodem.ko text=0x20e0 text=0x1360 data=0x6d8+0x4 syms=[0x8+0xee8+0x8+0xb46]
> /boot/entropy size=0x1000
> /etc/hostid size=0x25
> Using DTB provided by EFI at 0x7ef5000.
> EFI framebuffer information:
> addr, size     0x3eaf0000, 0x10a800
> dimensions     656 x 416
> stride         656
> masks          0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
> ---<<BOOT>>---
> GDB: debug ports: uart
> GDB: current port: uart
> KDB: debugger backends: ddb gdb
> KDB: current backend: ddb
> WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
> Copyright (c) 1992-2022 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 14.0-CURRENT #74 main-n255816-e26ef41f799: Wed May 25 15:05:14 PDT 2022
>      [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> FreeBSD clang version 14.0.3 (https://github.com/llvm/llvm-project.git llvmorg-14.0.3-0-g1f9140064dfb)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT(efifb): resolution 656x416
> module firmware already present!
> KLD file umodem.ko is missing dependencies
> real memory  = 993984512 (947 MB)
> avail memory = 944148480 (900 MB)
> Starting CPU 1 (1)
> Starting CPU 2 (2)
> Starting CPU 3 (3)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> random: unblocking device.
> random: entropy device external interface
> MAP 39f34000 mode 2 pages 1
> MAP 39f38000 mode 2 pages 3
> MAP 39f3c000 mode 2 pages 4
> MAP 3b350000 mode 2 pages 16
> MAP 3f100000 mode 0 pages 1
> kbd0 at kbdmux0
> ofwbus0: <Open Firmware Device Tree>
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> ofw_clkbus0: <OFW clocks bus> on ofwbus0
> clk_fixed0: <Fixed clock> on ofw_clkbus0
> clk_fixed1: <Fixed clock> on ofw_clkbus0
> regfix0: <Fixed Regulator> on ofwbus0
> regfix1: <Fixed Regulator> on ofwbus0
> bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
> ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
> intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0
> gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0
> gpiobus0: <OFW GPIO bus> on gpio0
> gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
> gpiobus1: <GPIO bus> on gpio1
> mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0
> generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
> Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
> Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
> usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
> bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0
> gpioc0: <GPIO controller> on gpio0
> uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 9 on simplebus0
> uart0: console (115200,n,8,1)
> spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 11 on simplebus0
> spibus0: <OFW SPI bus> on spi0
> spibus0: <unknown card> at cs 0 mode 0
> spibus0: <unknown card> at cs 1 mode 0
> iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 19 on simplebus0
> bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0
> usbus1 on bcm283x_dwcotg0
> bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0
> bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0
> bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7e104000-0x7e10400f irq 40 on simplebus0
> sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 48 on simplebus0
> mmc0: <MMC/SD bus> on sdhci_bcm0
> gpioc1: <GPIO controller> on gpio1
> fb0: <BCM2835 VT framebuffer driver> on simplebus0
> fb0: keeping existing fb bpp of 32
> fbd0 on fb0
> WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
> VT: Replacing driver "efifb" with new "fb".
> fb0: 656x416(656x416@0,0) 32bpp
> fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584
> pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> cpu0: <Open Firmware CPU> on cpulist0
> bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
> cpu1: <Open Firmware CPU> on cpulist0
> cpu2: <Open Firmware CPU> on cpulist0
> cpu3: <Open Firmware CPU> on cpulist0
> gpioled0: <GPIO LEDs> on ofwbus0
> gpioled0: <led0> failed to map pin
> lock order reversal: (sleepable after non-sleepable)
>   1st 0xffff000000c49aa0 LED mtx (LED mtx, sleep mutex) @ /usr/src/sys/dev/led/led.c:298
>   2nd 0xffffa00000dc1c10 Raspberry Pi firmware gpio (Raspberry Pi firmware gpio, sx) @ /usr/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:252
> lock order LED mtx -> Raspberry Pi firmware gpio attempted at:
> #0 0xffff0000004c9024 at witness_checkorder+0xadc
> #1 0xffff000000464638 at _sx_xlock+0x7c
> #2 0xffff0000007e1e3c at rpi_fw_gpio_pin_set+0xe8
> #3 0xffff0000001c9378 at led_create_state+0x158
> #4 0xffff0000001950ec at gpioled_attach+0x290
> #5 0xffff000000494328 at device_attach+0x3f8
> #6 0xffff000000493e98 at device_probe_and_attach+0x7c
> #7 0xffff0000004961e4 at bus_generic_new_pass+0xfc
> #8 0xffff000000496194 at bus_generic_new_pass+0xac
> #9 0xffff000000496194 at bus_generic_new_pass+0xac
> #10 0xffff00000049110c at bus_set_pass+0x4c
> #11 0xffff0000003e2ab0 at mi_startup+0x1fc
> #12 0xffff0000000008b8 at virtdone+0x7c
> uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks held:
> exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298
> stack backtrace:
> #0 0xffff0000004c9470 at witness_debugger+0x5c
> #1 0xffff0000004ca66c at witness_warn+0x400
> #2 0xffff0000006f8224 at uma_zalloc_debug+0x30
> #3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c
> #4 0xffff00000042e230 at malloc+0x94
> #5 0xffff0000007d70a8 at bcm2835_firmware_property+0x44
> #6 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100
> #7 0xffff0000001c9378 at led_create_state+0x158
> #8 0xffff0000001950ec at gpioled_attach+0x290
> #9 0xffff000000494328 at device_attach+0x3f8
> #10 0xffff000000493e98 at device_probe_and_attach+0x7c
> #11 0xffff0000004961e4 at bus_generic_new_pass+0xfc
> #12 0xffff000000496194 at bus_generic_new_pass+0xac
> #13 0xffff000000496194 at bus_generic_new_pass+0xac
> #14 0xffff00000049110c at bus_set_pass+0x4c
> #15 0xffff0000003e2ab0 at mi_startup+0x1fc
> #16 0xffff0000000008b8 at virtdone+0x7c
> uma_zalloc_debug: zone "malloc-16" with the following non-sleepable locks held:
> exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298
> stack backtrace:
> #0 0xffff0000004c9470 at witness_debugger+0x5c
> #1 0xffff0000004ca66c at witness_warn+0x400
> #2 0xffff0000006f8224 at uma_zalloc_debug+0x30
> #3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c
> #4 0xffff00000042e230 at malloc+0x94
> #5 0xffff000000742d88 at bounce_bus_dmamem_alloc+0x50
> #6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc
> #7 0xffff0000007d70dc at bcm2835_firmware_property+0x78
> #8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100
> #9 0xffff0000001c9378 at led_create_state+0x158
> #10 0xffff0000001950ec at gpioled_attach+0x290
> #11 0xffff000000494328 at device_attach+0x3f8
> #12 0xffff000000493e98 at device_probe_and_attach+0x7c
> #13 0xffff0000004961e4 at bus_generic_new_pass+0xfc
> #14 0xffff000000496194 at bus_generic_new_pass+0xac
> #15 0xffff000000496194 at bus_generic_new_pass+0xac
> #16 0xffff00000049110c at bus_set_pass+0x4c
> #17 0xffff0000003e2ab0 at mi_startup+0x1fc
> uma_zalloc_debug: zone "malloc-128" with the following non-sleepable locks held:
> exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298
> stack backtrace:
> #0 0xffff0000004c9470 at witness_debugger+0x5c
> #1 0xffff0000004ca66c at witness_warn+0x400
> #2 0xffff0000006f8224 at uma_zalloc_debug+0x30
> #3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c
> #4 0xffff00000042e230 at malloc+0x94
> #5 0xffff000000742dd8 at bounce_bus_dmamem_alloc+0xa0
> #6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc
> #7 0xffff0000007d70dc at bcm2835_firmware_property+0x78
> #8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100
> #9 0xffff0000001c9378 at led_create_state+0x158
> #10 0xffff0000001950ec at gpioled_attach+0x290
> #11 0xffff000000494328 at device_attach+0x3f8
> #12 0xffff000000493e98 at device_probe_and_attach+0x7c
> #13 0xffff0000004961e4 at bus_generic_new_pass+0xfc
> #14 0xffff000000496194 at bus_generic_new_pass+0xac
> #15 0xffff000000496194 at bus_generic_new_pass+0xac
> #16 0xffff00000049110c at bus_set_pass+0x4c
> #17 0xffff0000003e2ab0 at mi_startup+0x1fc
> uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks held:
> exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298
> stack backtrace:
> #0 0xffff0000004c9470 at witness_debugger+0x5c
> #1 0xffff0000004ca66c at witness_warn+0x400
> #2 0xffff0000006f8224 at uma_zalloc_debug+0x30
> #3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c
> #4 0xffff00000042e230 at malloc+0x94
> #5 0xffff000000742e60 at bounce_bus_dmamem_alloc+0x128
> #6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc
> #7 0xffff0000007d70dc at bcm2835_firmware_property+0x78
> #8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100
> #9 0xffff0000001c9378 at led_create_state+0x158
> #10 0xffff0000001950ec at gpioled_attach+0x290
> #11 0xffff000000494328 at device_attach+0x3f8
> #12 0xffff000000493e98 at device_probe_and_attach+0x7c
> #13 0xffff0000004961e4 at bus_generic_new_pass+0xfc
> #14 0xffff000000496194 at bus_generic_new_pass+0xac
> #15 0xffff000000496194 at bus_generic_new_pass+0xac
> #16 0xffff00000049110c at bus_set_pass+0x4c
> #17 0xffff0000003e2ab0 at mi_startup+0x1fc
> armv8crypto0: CPU lacks AES instructions
> Timecounters tick every 1.000 msec
> usbus1: 480Mbps High Speed USB v2.0
> iicbus0: <OFW I2C bus> on iichb0
> iic0: <I2C generic I/O> on iicbus0
> ugen1.1: <DWCOTG OTG Root HUB> at usbus1
> uhub0 on usbus1
> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> mmcsd0: 64GB <SDHC EC2QT 3.0 SN 529453E5 MFG 08/2019 by 27 SM> at mmc0 50.0MHz/4bit/65535-block
> bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
> CPU  0: ARM Cortex-A53 r0p4 affinity:  0
>                     Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>   Instruction Set Attributes 0 = <CRC32>
>   Instruction Set Attributes 1 = <>
>           Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>           Processor Features 1 = <>
>        Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> Trying to mount root from ufs:/dev/da0s2a [rw]...
>        Memory Model Features 1 = <8bit VMID>
>        Memory Model Features 2 = <32bit CCIDX,48bit VA>
>               Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>               Debug Features 1 = <>
>           Auxiliary Features 0 = <>
>           Auxiliary Features 1 = <>
> AArch32 Instruction Set Attributes 5 = <CRC32,SEVL>
> AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
> AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
> CPU  1: ARM Cortex-A53 r0p4 affinity:  1
> CPU  2: ARM Cortex-A53 r0p4 affinity:  2
> CPU  3: ARM Cortex-A53 r0p4 affinity:  3
> Release APs...done
> WARNING: WITNESS option enabled, expect reduced performance.
> uhub0: 1 port with 1 removable, self powered
> ugen1.2: <vendor 0x0424 product 0x9514> at usbus1
> uhub1 on uhub0
> uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus1
> uhub1: MTT enabled
> Root mount waiting for: usbus1 CAM
> uhub1: 5 ports with 4 removable, self powered
> ugen1.3: <vendor 0x0424 product 0xec00> at usbus1
> smsc0 on uhub1
> smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1
> smsc0: chip 0xec00, rev. 0002
> miibus0: <MII bus> on smsc0
> smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
> smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ue0: <USB Ethernet> on smsc0
> ue0: Ethernet address: b8:27:eb:71:46:4e
> Root mount waiting for: usbus1 CAM
> ugen1.4: <VIA Labs, Inc. USB2.0 Hub> at usbus1
> uhub2 on uhub1
> uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.70, addr 4> on usbus1
> uhub2: 4 ports with 4 removable, self powered
> Root mount waiting for: usbus1 CAM
> Root mount waiting for: usbus1 CAM
> usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASMT ASM105x (0x174c:0x55aa)
> ugen1.5: <ASMT ASM105x> at usbus1
> umass0 on uhub2
> umass0: <ASMT ASM105x, class 0/0, rev 2.10/1.00, addr 5> on usbus1
> umass0:  SCSI over Bulk-Only; quirks = 0x0100
> umass0:0:0: Attached to scbus0
> ugen1.6: <FTDI FT232R USB UART> at usbus1
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> ugen1.5: <ASMT ASM105x> at usbus1 (disconnected)
> umass0: at uhub2, port 4, addr 5 (disconnected)
> umass0: detached
> Root mount waiting for: CAM
> usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASMT ASM105x (0x174c:0x55aa)
> ugen1.5: <ASMT ASM105x> at usbus1
> umass0 on uhub2
> umass0: <ASMT ASM105x, class 0/0, rev 2.10/1.00, addr 5> on usbus1
> umass0:  SCSI over Bulk-Only; quirks = 0x0100
> umass0:0:0: Attached to scbus0
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> Root mount waiting for: CAM
> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
> da0: <ASMT ASM105x 0> Fixed Direct Access SPC-4 SCSI device
> da0: Serial Number 12345678D558
> da0: 40.000MB/s transfers
> da0: 953869MB (1953525168 512 byte sectors)
> da0: quirks=0x2<NO_6_BYTE>
> Warning: no time-of-day clock registered, system time will not be set accurately
> Dual Console: Serial Primary, Video Secondary
> Setting hostuuid: 30303030-3030-3030-3064-626136386435.
> Setting hostid: 0x5cd40a6a.
> Starting file system checks:
> Cannot find file system superblock
> Cannot find file system superblock
> Warning! Some of the devices might not be available; retrying
> Restarting file system checks:
> Cannot find file system superblock
> Cannot find file system superblock
> Unknown error 3; help!
> ERROR: ABORTING BOOT (sending SIGTERM to parent)!
> 2022-06-13T08:05:20.701056-07:00 - init 1 - - /bin/sh on /etc/rc terminated abnormally, going to single user mode
> Enter full pathname of shell or RETURN for /bin/sh:
> root@:/ # uname -a
> FreeBSD  14.0-CURRENT FreeBSD 14.0-CURRENT #74 main-n255816-e26ef41f799: Wed May 25 15:05:14 PDT 2022     [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> root@:/ #
> root@:/ # fsck
> Cannot find file system superblock
> Cannot find file system superblock
> 
> LOOK FOR ALTERNATE SUPERBLOCKS? no
> 
> root@:/ #
> root@:/ # fsck -y
> Cannot find file system superblock
> Cannot find file system superblock
> 
> LOOK FOR ALTERNATE SUPERBLOCKS? no
> 
> Indeed, it looks as if the -y option of fsck is now gone.....
> Yet, somewhat astonishingly:
> 
> 



Hi,

Do you have a mix up with labels and partitions/slices on your disk? Could it be that a label was written over a filesystem and instead of mounting from the label your are mounting the corrupted filesystem.

Regards,
Ronald.






> root@:/ # exit
> Setting hostuuid: 30303030-3030-3030-3064-626136386435.
> Setting hostid: 0x5cd40a6a.
> Fast boot: skipping disk checks.
> Mounting local filesystems:.
> ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/perl5/5.32/mach/CORE /usr/local/llvm10/lib
> Setting hostname: www.zefox.org.
> Setting up harvesting: [CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
> Feeding entropy: .
> lo0: link state changed to UP
> smsc0: chip 0xec00, rev. 0002
> ue0: link state changed to DOWN
> ue0: link state changed to UP
> Starting Network: lo0 ue0.
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> 	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
> 	inet6 ::1 prefixlen 128
> 	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
> 	inet 127.0.0.1 netmask 0xff000000
> 	groups: lo
> 	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> 	options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
> 	ether b8:27:eb:71:46:4e
> 	inet 50.1.20.28 netmask 0xffffff00 broadcast 50.1.20.255
> 	media: Ethernet autoselect (100baseTX <full-duplex>)
> 	status: active
> 	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> Starting devd.
> Autoloading module: uftdi.ko
> uftdi0 on uhub1
> uftdi0: <FT232R USB UART> on usbus1
> add host 127.0.0.1: gateway lo0 fib 0: route already in table
> add net default: gateway 50.1.20.1
> add host ::1: gateway lo0 fib 0: route already in table
> add net fe80::: gateway ::1
> add net ff02::: gateway ::1
> add net ::ffff:0.0.0.0: gateway ::1
> add net ::0.0.0.0: gateway ::1
> Updating motd:.
> Creating and/or trimming log files.
> Updating /var/run/os-release done.
> Starting syslogd.
> Clearing /tmp (X related).
> No core dumps found.
> Setting date via ntp.
> 13 Jun 08:22:48 ntpdate[875]: step time server 86.3.245.8 offset -24453.100209 sec
> Mounting late filesystems:.
> Starting powerd.
> Starting sendmail.
> Starting sendmail_msp_queue.
> Starting cron.
> Performing sanity check on sshd configuration.
> Starting sshd.
> Configuring vt: blanktime.
> Starting background file system checks in 60 seconds.
> 
> Mon Jun 13 08:23:00 PDT 2022
> 
> FreeBSD/arm64 (www.zefox.org) (ttyu0)
> 
> login:
> 
> at which point it's possible to run well enough to update and recompile.
> Seemingly this is a local problem unique to my systems. In the meantime
> I'll try another git pull and recompile....
> 
> Thanks for writing!
> 
> bob prohaska
>   
> 
> 
> 
> 
> 
>> commit 800a53b445e7eb113ba193b1ac98631299178529
>> Author:     Kirk McKusick <[email protected]>
>> AuthorDate: 2022-06-11 18:04:19 +0000
>> Commit:     Kirk McKusick <[email protected]>
>> CommitDate: 2022-06-11 18:05:14 +0000
>>
>>      Bug fix to UFS/FFS superblock integrity checks when reading a superblock.
>>      
>>      One of the checks was that the cylinder group size (fs_cgsize)
>>      matched that calculated by CGSIZE(). The value calculated by CGSIZE()
>>      has changed over time as the filesystem has evolved. Thus comparing
>>      the value of CGSIZE() of the current generation filesystem may not
>>      match the size as computed by CGSIZE() that was in effect at the
>>      time an older filesystem was created. Therefore the check for
>>      fs_cgsize is changed to simply ensure that it is not larger than
>>      the filesystem blocksize (fs_bsize).
>>      
>>      Reported by: Martin Birgmeier
>>      Tested by:   Martin Birgmeier
>>      MFC after:   1 month (with 076002f24d35)
>>      PR:          264450
>>      Differential Revision: https://reviews.freebsd.org/D35219
>> ---
>>   sys/ufs/ffs/ffs_subr.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/sys/ufs/ffs/ffs_subr.c b/sys/ufs/ffs/ffs_subr.c
>> index f25a6cba12f4..3e31746c2cfc 100644
>> --- a/sys/ufs/ffs/ffs_subr.c
>> +++ b/sys/ufs/ffs/ffs_subr.c
>> @@ -385,7 +385,7 @@ validate_sblock(struct fs *fs, int isaltsblk)
>>   		roundup(howmany(SBLOCKSIZE, fs->fs_fsize), fs->fs_frag) ||
>>   	    fs->fs_iblkno != fs->fs_cblkno + fs->fs_frag ||
>>   	    fs->fs_dblkno != fs->fs_iblkno + fs->fs_ipg / INOPF(fs) ||
>> -	    fs->fs_cgsize != fragroundup(fs, CGSIZE(fs)))
>> +	    fs->fs_cgsize > fs->fs_bsize)
>>   		return (ENOENT);
>>   	if (fs->fs_csaddr != cgdmin(fs, 0) ||
>>   	    fs->fs_cssize !=
>>
>>
>> ===
>> Mark Millard
>> marklmi at yahoo.com
>>
>>
>