Re: FreeBSD OS installation stuck after selecting Boot installer

On 2024-08-15 01:02, Anantharam, Arjun wrote:
> Hi Folks,
> 
>  Another update and was hoping to get some inputs..
> 
>  We have an NVMe disk on PCie bus on which i would like to boot
> FreeBSD and install. So, i followed these instructions and i might be
> missing something here. Can you please take a look and provide some
> inputs:

Which NVMe drive are you using? There appear to be 4 devices:
  1. the nvme driver attaches, but not the nda driver
  2. No driver attaches "pci0: <mass storage, NVM> at device 1.7 (no 
driver attached)"
  3. Has nvme and nda drivers "nda0: <INTEL SSDPF21Q032TB L0310600 
PHAL2200001M3P2GGN>"
  4. Has nvme and nda drivers "nda1: <INTEL SSDPF21Q032TB L0310600 
PHAL220000123P2GGN>"

...

> _[root@ipu-acc tmp]# sudo dd
> if=FreeBSD-14.1-RELEASE-arm64-aarch64-memstick.img of=/dev/nvme0n1
> bs=1M status=progress_

Can you try with a recent 15.0-CURRENT snapshot? It will have extra 
debugging enable. e.g. something from 
https://download.freebsd.org/snapshots/ISO-IMAGES/15.0/

Andrew