Re: FreeBSD OS installation stuck after selecting Boot installer

Hi,

"nda0" is the one being used. "nda0" and "nda1" are the nvme drives behind pcie..
Will try 15.0 and update here..

Thanks,
Arjun
________________________________
From: Andrew Turner <[email protected]>
Sent: Tuesday, August 20, 2024 4:04 AM
To: Anantharam, Arjun <[email protected]>
Cc: Warner Losh <[email protected]>; Mark Millard <[email protected]>; [email protected] <[email protected]>
Subject: Re: FreeBSD OS installation stuck after selecting Boot installer

On 2024-08-15 01:02, Anantharam, Arjun wrote:
> Hi Folks,
>
>  Another update and was hoping to get some inputs..
>
>  We have an NVMe disk on PCie bus on which i would like to boot
> FreeBSD and install. So, i followed these instructions and i might be
> missing something here. Can you please take a look and provide some
> inputs:

Which NVMe drive are you using? There appear to be 4 devices:
  1. the nvme driver attaches, but not the nda driver
  2. No driver attaches "pci0: <mass storage, NVM> at device 1.7 (no
driver attached)"
  3. Has nvme and nda drivers "nda0: <INTEL SSDPF21Q032TB L0310600
PHAL2200001M3P2GGN>"
  4. Has nvme and nda drivers "nda1: <INTEL SSDPF21Q032TB L0310600
PHAL220000123P2GGN>"

...

> _[root@ipu-acc tmp]# sudo dd
> if=FreeBSD-14.1-RELEASE-arm64-aarch64-memstick.img of=/dev/nvme0n1
> bs=1M status=progress_

Can you try with a recent 15.0-CURRENT snapshot? It will have extra
debugging enable. e.g. something from
https://download.freebsd.org/snapshots/ISO-IMAGES/15.0/

Andrew