svn commit: r44964 - head/en_US.ISO8859-1/articles/geom-class
Benedict Reuschling <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.cvs.doc |
|---|---|
| Message-ID | <[email protected]> |
Author: bcr
Date: Mon May 26 19:01:20 2014
New Revision: 44964
URL: http://svnweb.freebsd.org/changeset/doc/44964
Log:
Big whitespace cleanup, so that igor does not complain anymore.
Translators, you can ignore this.
Modified:
head/en_US.ISO8859-1/articles/geom-class/article.xml
Modified: head/en_US.ISO8859-1/articles/geom-class/article.xml
==============================================================================
--- head/en_US.ISO8859-1/articles/geom-class/article.xml Mon May 26 18:28:36 2014 (r44963)
+++ head/en_US.ISO8859-1/articles/geom-class/article.xml Mon May 26 19:01:20 2014 (r44964)
@@ -1,15 +1,24 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE article PUBLIC "-//FreeBSD//DTD DocBook XML V5.0-Based Extension//EN"
"http://www.FreeBSD.org/XML/share/xml/freebsd50.dtd">
-<article xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" version="5.0" xml:lang="en">
-
- <info><title>Writing a GEOM Class</title>
+<article xmlns="http://docbook.org/ns/docbook"
+ xmlns:xlink="http://www.w3.org/1999/xlink" version="5.0"
+ xml:lang="en">
+ <info>
+ <title>Writing a GEOM Class</title>
<authorgroup>
- <author><personname><firstname>Ivan</firstname><surname>Voras</surname></personname><affiliation>
- <address><email>[email protected]</email>
- </address>
- </affiliation></author>
+ <author>
+ <personname>
+ <firstname>Ivan</firstname>
+ <surname>Voras</surname>
+ </personname>
+ <affiliation>
+ <address>
+ <email>[email protected]</email>
+ </address>
+ </affiliation>
+ </author>
</authorgroup>
<legalnotice xml:id="trademarks" role="trademarks">
@@ -23,65 +32,83 @@
<releaseinfo>$FreeBSD$</releaseinfo>
<abstract>
-
<para>This text documents some starting points in developing
- GEOM classes, and kernel modules in general. It is assumed
- that the reader is familiar with C userland programming.</para>
-
+ GEOM classes, and kernel modules in general. It is assumed
+ that the reader is familiar with C userland
+ programming.</para>
</abstract>
-
</info>
<!-- Introduction -->
-<sect1 xml:id="intro">
- <title>Introduction</title>
-
- <sect2 xml:id="intro-docs">
- <title>Documentation</title>
+ <sect1 xml:id="intro">
+ <title>Introduction</title>
- <para>Documentation on kernel programming is scarce — it is one of
- few areas where there is nearly nothing in the way of friendly
- tutorials, and the phrase <quote>use the source!</quote> really
- holds true. However, there are some bits and pieces (some of
- them seriously outdated) floating around that should be studied
- before beginning to code:</para>
-
- <itemizedlist>
-
- <listitem><para>The <link xlink:href="&url.books.developers-handbook;/index.html">FreeBSD
- Developer's Handbook</link> — part of the documentation
- project, it does not contain anything specific to kernel
- programming, but rather some general useful information.</para></listitem>
-
- <listitem><para>The <link xlink:href="&url.books.arch-handbook;/index.html">FreeBSD
- Architecture Handbook</link> — also from the documentation
- project, contains descriptions of several low-level facilities
- and procedures. The most important chapter is 13, <link xlink:href="&url.books.arch-handbook;/driverbasics.html">Writing
- FreeBSD device drivers</link>.</para></listitem>
-
- <listitem><para>The Blueprints section of <link xlink:href="http://www.freebsddiary.org">FreeBSD Diary</link> web
- site — contains several interesting articles on kernel
- facilities.</para></listitem>
-
- <listitem><para>The man pages in section 9 — for important
- documentation on kernel functions.</para></listitem>
-
- <listitem><para>The &man.geom.4; man page and <link xlink:href="http://phk.freebsd.dk/pubs/">PHK's GEOM slides</link>
- — for general introduction of the GEOM
- subsystem.</para></listitem>
-
- <listitem><para>Man pages &man.g.bio.9;, &man.g.event.9;, &man.g.data.9;,
- &man.g.geom.9;, &man.g.provider.9; &man.g.consumer.9;, &man.g.access.9;
- & others linked from those, for documentation on specific
- functionalities.
- </para></listitem>
-
- <listitem><para>The &man.style.9; man page — for documentation on
- the coding-style conventions which must be followed for any code
- which is to be committed to the FreeBSD Subversion tree.</para></listitem>
-
- </itemizedlist>
+ <sect2 xml:id="intro-docs">
+ <title>Documentation</title>
+ <para>Documentation on kernel programming is scarce — it
+ is one of few areas where there is nearly nothing in the way
+ of friendly tutorials, and the phrase <quote>use the
+ source!</quote> really holds true. However, there are some
+ bits and pieces (some of them seriously outdated) floating
+ around that should be studied before beginning to code:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para>The <link
+ xlink:href="&url.books.developers-handbook;/index.html">FreeBSD
+ Developer's Handbook</link> — part of the
+ documentation project, it does not contain anything
+ specific to kernel programming, but rather some general
+ useful information.</para>
+ </listitem>
+
+ <listitem>
+ <para>The <link
+ xlink:href="&url.books.arch-handbook;/index.html">FreeBSD
+ Architecture Handbook</link> — also from the
+ documentation project, contains descriptions of several
+ low-level facilities and procedures. The most important
+ chapter is 13, <link
+ xlink:href="&url.books.arch-handbook;/driverbasics.html">Writing
+ FreeBSD device drivers</link>.</para>
+ </listitem>
+
+ <listitem>
+ <para>The Blueprints section of <link
+ xlink:href="http://www.freebsddiary.org">FreeBSD
+ Diary</link> web site — contains several
+ interesting articles on kernel
+ facilities.</para>
+ </listitem>
+
+ <listitem>
+ <para>The man pages in section 9 — for important
+ documentation on kernel functions.</para>
+ </listitem>
+
+ <listitem>
+ <para>The &man.geom.4; man page and <link
+ xlink:href="http://phk.freebsd.dk/pubs/">PHK's GEOM
+ slides</link> — for general introduction of the
+ GEOM subsystem.</para>
+ </listitem>
+
+ <listitem>
+ <para>Man pages &man.g.bio.9;, &man.g.event.9;,
+ &man.g.data.9;, &man.g.geom.9;, &man.g.provider.9;
+ &man.g.consumer.9;, &man.g.access.9; & others linked
+ from those, for documentation on specific
+ functionalities.</para>
+ </listitem>
+
+ <listitem>
+ <para>The &man.style.9; man page — for documentation
+ on the coding-style conventions which must be followed for
+ any code which is to be committed to the FreeBSD
+ Subversion tree.</para>
+ </listitem>
+ </itemizedlist>
</sect2>
</sect1>
@@ -89,75 +116,77 @@
<title>Preliminaries</title>
<para>The best way to do kernel development is to have (at least)
- two separate computers. One of these would contain the
+ two separate computers. One of these would contain the
development environment and sources, and the other would be used
to test the newly written code by network-booting and
network-mounting filesystems from the first one. This way if
the new code contains bugs and crashes the machine, it will not
- mess up the sources (and other <quote>live</quote> data). The
- second system does not even require a proper display. Instead, it
- could be connected with a serial cable or KVM to the first
+ mess up the sources (and other <quote>live</quote> data). The
+ second system does not even require a proper display. Instead,
+ it could be connected with a serial cable or KVM to the first
one.</para>
- <para>But, since not everybody has two or more computers handy, there are
- a few things that can be done to prepare an otherwise <quote>live</quote>
- system for developing kernel code. This setup is also applicable
- for developing in a <link xlink:href="http://www.vmware.com/">VMWare</link>
- or <link xlink:href="http://www.qemu.org/">QEmu</link> virtual machine (the
- next best thing after a dedicated development machine).</para>
+ <para>But, since not everybody has two or more computers handy,
+ there are a few things that can be done to prepare an otherwise
+ <quote>live</quote> system for developing kernel code. This
+ setup is also applicable for developing in a <link
+ xlink:href="http://www.vmware.com/">VMWare</link> or <link
+ xlink:href="http://www.qemu.org/">QEmu</link> virtual machine
+ (the next best thing after a dedicated development
+ machine).</para>
<sect2 xml:id="prelim-system">
<title>Modifying a System for Development</title>
<para>For any kernel programming a kernel with
- <option>INVARIANTS</option> enabled is a must-have. So enter
- these in your kernel configuration file:</para>
+ <option>INVARIANTS</option> enabled is a must-have. So enter
+ these in your kernel configuration file:</para>
- <programlisting>options INVARIANT_SUPPORT
+ <programlisting>options INVARIANT_SUPPORT
options INVARIANTS</programlisting>
- <para>For more debugging you should also include WITNESS support,
- which will alert you of mistakes in locking:</para>
+ <para>For more debugging you should also include WITNESS
+ support, which will alert you of mistakes in locking:</para>
- <programlisting>options WITNESS_SUPPORT
+ <programlisting>options WITNESS_SUPPORT
options WITNESS</programlisting>
<para>For debugging crash dumps, a kernel with debug symbols is
- needed:</para>
+ needed:</para>
<programlisting> makeoptions DEBUG=-g</programlisting>
<para>With the usual way of installing the kernel (<command>make
- installkernel</command>) the debug kernel will not be
- automatically installed. It is called
- <filename>kernel.debug</filename> and located in
- <filename>/usr/obj/usr/src/sys/KERNELNAME/</filename>. For
- convenience it should be copied to
- <filename>/boot/kernel/</filename>.</para>
+ installkernel</command>) the debug kernel will not be
+ automatically installed. It is called
+ <filename>kernel.debug</filename> and located in
+ <filename>/usr/obj/usr/src/sys/KERNELNAME/</filename>. For
+ convenience it should be copied to
+ <filename>/boot/kernel/</filename>.</para>
<para>Another convenience is enabling the kernel debugger so you
- can examine a kernel panic when it happens. For this, enter
- the following lines in your kernel configuration file:</para>
+ can examine a kernel panic when it happens. For this, enter
+ the following lines in your kernel configuration file:</para>
<programlisting>options KDB
options DDB
options KDB_TRACE</programlisting>
<para>For this to work you might need to set a sysctl (if it is
- not on by default):</para>
+ not on by default):</para>
<programlisting> debug.debugger_on_panic=1</programlisting>
<para>Kernel panics will happen, so care should be taken with
- the filesystem cache. In particular, having softupdates might
- mean the latest file version could be lost if a panic occurs
- before it is committed to storage. Disabling softupdates
- yields a great performance hit, and still does not guarantee
- data consistency. Mounting filesystem with the <quote>sync</quote> option
- is needed for that. For a compromise, the softupdates cache delays can
- be shortened. There are three sysctl's that are useful for
- this (best to be set in
- <filename>/etc/sysctl.conf</filename>):</para>
+ the filesystem cache. In particular, having softupdates might
+ mean the latest file version could be lost if a panic occurs
+ before it is committed to storage. Disabling softupdates
+ yields a great performance hit, and still does not guarantee
+ data consistency. Mounting filesystem with the
+ <quote>sync</quote> option is needed for that. For a
+ compromise, the softupdates cache delays can be shortened.
+ There are three sysctl's that are useful for this (best to be
+ set in <filename>/etc/sysctl.conf</filename>):</para>
<programlisting>kern.filedelay=5
kern.dirdelay=4
@@ -166,76 +195,79 @@ kern.metadelay=3</programlisting>
<para>The numbers represent seconds.</para>
<para>For debugging kernel panics, kernel core dumps are
- required. Since a kernel panic might make filesystems
- unusable, this crash dump is first written to a raw
- partition. Usually, this is the swap partition. This partition must be at
- least as large as the physical RAM in the machine. On the
- next boot, the dump is copied to a regular file.
- This happens after filesystems are checked and mounted, and
- before swap is enabled. This is controlled with two
- <filename>/etc/rc.conf</filename> variables:</para>
+ required. Since a kernel panic might make filesystems
+ unusable, this crash dump is first written to a raw partition.
+ Usually, this is the swap partition. This partition must be
+ at least as large as the physical RAM in the machine. On the
+ next boot, the dump is copied to a regular file. This happens
+ after filesystems are checked and mounted, and before swap is
+ enabled. This is controlled with two
+ <filename>/etc/rc.conf</filename> variables:</para>
<programlisting>dumpdev="/dev/ad0s4b"
dumpdir="/usr/core </programlisting>
<para>The <varname>dumpdev</varname> variable specifies the swap
- partition and <varname>dumpdir</varname> tells the system
- where in the filesystem to relocate the core dump on reboot.</para>
+ partition and <varname>dumpdir</varname> tells the system
+ where in the filesystem to relocate the core dump on
+ reboot.</para>
<para>Writing kernel core dumps is slow and takes a long time so
- if you have lots of memory (>256M) and lots of panics it could
- be frustrating to sit and wait while it is done (twice — first
- to write it to swap, then to relocate it to filesystem). It is
- convenient then to limit the amount of RAM the system will use
- via a <filename>/boot/loader.conf</filename> tunable:</para>
+ if you have lots of memory (>256M) and lots of panics it
+ could be frustrating to sit and wait while it is done (twice
+ — first to write it to swap, then to relocate it to
+ filesystem). It is convenient then to limit the amount of RAM
+ the system will use via a
+ <filename>/boot/loader.conf</filename> tunable:</para>
<programlisting> hw.physmem="256M"</programlisting>
<para>If the panics are frequent and filesystems large (or you
- simply do not trust softupdates+background fsck) it is advisable
- to turn background fsck off via
- <filename>/etc/rc.conf</filename> variable:</para>
+ simply do not trust softupdates+background fsck) it is
+ advisable to turn background fsck off via
+ <filename>/etc/rc.conf</filename> variable:</para>
<programlisting> background_fsck="NO"</programlisting>
<para>This way, the filesystems will always get checked when
- needed. Note that with background fsck, a new panic could happen while
- it is checking the disks. Again, the safest way is not to have
- many local filesystems by using another computer as an NFS
- server.</para>
+ needed. Note that with background fsck, a new panic could
+ happen while it is checking the disks. Again, the safest way
+ is not to have many local filesystems by using another
+ computer as an NFS server.</para>
</sect2>
<sect2 xml:id="prelim-starting">
<title>Starting the Project</title>
<para>For the purpose of creating a new GEOM class, an empty
- subdirectory has to be created under an arbitrary user-accessible
- directory. You do not have to create the module directory under
- <filename>/usr/src</filename>.</para>
+ subdirectory has to be created under an arbitrary
+ user-accessible directory. You do not have to create the
+ module directory under <filename>/usr/src</filename>.</para>
</sect2>
<sect2 xml:id="prelim-makefile">
<title>The Makefile</title>
<para>It is good practice to create
- <filename>Makefile</filename>s for every nontrivial coding
- project, which of course includes kernel modules.</para>
+ <filename>Makefile</filename>s for every nontrivial coding
+ project, which of course includes kernel modules.</para>
<para>Creating the <filename>Makefile</filename> is simple
- thanks to an extensive set of helper routines provided by the
- system. In short, here is how a minimal <filename>Makefile</filename>
- looks for a kernel module:</para>
+ thanks to an extensive set of helper routines provided by the
+ system. In short, here is how a minimal
+ <filename>Makefile</filename> looks for a kernel
+ module:</para>
<programlisting>SRCS=g_journal.c
KMOD=geom_journal
.include <bsd.kmod.mk></programlisting>
- <para>This <filename>Makefile</filename> (with changed filenames)
- will do for any kernel module, and a GEOM class can reside in just
- one kernel module. If more than one file is required, list it in the
- <envar>SRCS</envar> variable, separated with whitespace from
- other filenames.</para>
+ <para>This <filename>Makefile</filename> (with changed
+ filenames) will do for any kernel module, and a GEOM class can
+ reside in just one kernel module. If more than one file is
+ required, list it in the <envar>SRCS</envar> variable,
+ separated with whitespace from other filenames.</para>
</sect2>
</sect1>
@@ -245,76 +277,77 @@ KMOD=geom_journal
<sect2 xml:id="kernelprog-memalloc">
<title>Memory Allocation</title>
- <para>See &man.malloc.9;. Basic memory allocation is only
- slightly different than its userland equivalent. Most
- notably, <function>malloc</function>() and
- <function>free</function>() accept additional parameters as is
- described in the man page.</para>
+ <para>See &man.malloc.9;. Basic memory allocation is only
+ slightly different than its userland equivalent. Most
+ notably, <function>malloc</function>() and
+ <function>free</function>() accept additional parameters as is
+ described in the man page.</para>
<para>A <quote>malloc type</quote> must be declared in the
- declaration section of a source file, like this:</para>
+ declaration section of a source file, like this:</para>
<programlisting> static MALLOC_DEFINE(M_GJOURNAL, "gjournal data", "GEOM_JOURNAL Data");</programlisting>
<para>To use this macro, <filename>sys/param.h</filename>,
- <filename>sys/kernel.h</filename> and
- <filename>sys/malloc.h</filename> headers must be
- included.</para>
+ <filename>sys/kernel.h</filename> and
+ <filename>sys/malloc.h</filename> headers must be
+ included.</para>
<para>There is another mechanism for allocating memory, the UMA
- (Universal Memory Allocator). See &man.uma.9; for details, but
- it is a special type of allocator mainly used for speedy
- allocation of lists comprised of same-sized items (for
- example, dynamic arrays of structs).</para>
+ (Universal Memory Allocator). See &man.uma.9; for details,
+ but it is a special type of allocator mainly used for speedy
+ allocation of lists comprised of same-sized items (for
+ example, dynamic arrays of structs).</para>
</sect2>
<sect2 xml:id="kernelprog-lists">
<title>Lists and Queues</title>
- <para>See &man.queue.3;. There are a LOT of cases when a list of
- things needs to be maintained. Fortunately, this data
- structure is implemented (in several ways) by C macros
- included in the system. The most used list type is TAILQ
- because it is the most flexible. It is also the one with largest
- memory requirements (its elements are doubly-linked) and
- also the slowest (although the speed variation is on
- the order of several CPU instructions more, so it should not be
- taken seriously).</para>
+ <para>See &man.queue.3;. There are a LOT of cases when a list
+ of things needs to be maintained. Fortunately, this data
+ structure is implemented (in several ways) by C macros
+ included in the system. The most used list type is TAILQ
+ because it is the most flexible. It is also the one with
+ largest memory requirements (its elements are doubly-linked)
+ and also the slowest (although the speed variation is on the
+ order of several CPU instructions more, so it should not be
+ taken seriously).</para>
<para>If data retrieval speed is very important, see
- &man.tree.3; and &man.hashinit.9;.</para>
+ &man.tree.3; and &man.hashinit.9;.</para>
</sect2>
<sect2 xml:id="kernelprog-bios">
<title>BIOs</title>
- <para>Structure <varname remap="structname">bio</varname> is used for any and
- all Input/Output operations concerning GEOM. It basically
- contains information about what device ('provider') should
- satisfy the request, request type, offset, length, pointer to
- a buffer, and a bunch of <quote>user-specific</quote> flags
- and fields that can help implement various hacks.</para>
-
- <para>The important thing here is that <varname remap="structname">bio</varname>s
- are handled asynchronously. That means that, in most parts of the code,
- there is no analogue to userland's &man.read.2; and
- &man.write.2; calls that do not return until a request is
- done. Rather, a developer-supplied function is called as a
- notification when the request gets completed (or results in
- error).</para>
-
- <para>The asynchronous programming model (also
- called <quote>event-driven</quote>) is somewhat harder
- than the much more used imperative one used in userland
- (at least it takes a
- while to get used to it). In some cases the helper routines
- <function>g_write_data</function>() and
- <function>g_read_data</function>() can be used, but <emphasis>not
- always</emphasis>. In particular, they cannot be used when
- a mutex is held; for example, the GEOM topology mutex or
- the internal mutex held during the <function>.start</function>() and
- <function>.stop</function>() functions.</para>
-
+ <para>Structure <varname remap="structname">bio</varname> is
+ used for any and all Input/Output operations concerning GEOM.
+ It basically contains information about what device
+ ('provider') should satisfy the request, request type, offset,
+ length, pointer to a buffer, and a bunch of
+ <quote>user-specific</quote> flags and fields that can help
+ implement various hacks.</para>
+
+ <para>The important thing here is that <varname
+ remap="structname">bio</varname>s are handled
+ asynchronously. That means that, in most parts of the code,
+ there is no analogue to userland's &man.read.2; and
+ &man.write.2; calls that do not return until a request is
+ done. Rather, a developer-supplied function is called as a
+ notification when the request gets completed (or results in
+ error).</para>
+
+ <para>The asynchronous programming model (also called
+ <quote>event-driven</quote>) is somewhat harder than the much
+ more used imperative one used in userland (at least it takes a
+ while to get used to it). In some cases the helper routines
+ <function>g_write_data</function>() and
+ <function>g_read_data</function>() can be used, but
+ <emphasis>not always</emphasis>. In particular, they cannot
+ be used when a mutex is held; for example, the GEOM topology
+ mutex or the internal mutex held during the
+ <function>.start</function>() and <function>.stop</function>()
+ functions.</para>
</sect2>
</sect1>
@@ -325,109 +358,131 @@ KMOD=geom_journal
<title>Ggate</title>
<para>If maximum performance is not needed, a much simpler way
- of making a data transformation is to implement it in userland
- via the ggate (GEOM gate) facility. Unfortunately, there is no
- easy way to convert between, or even share code between the
- two approaches.</para>
+ of making a data transformation is to implement it in userland
+ via the ggate (GEOM gate) facility. Unfortunately, there is
+ no easy way to convert between, or even share code between the
+ two approaches.</para>
</sect2>
<sect2 xml:id="geom-class">
<title>GEOM Class</title>
- <para>GEOM classes are transformations on the data. These transformations
- can be combined in a tree-like fashion. Instances of GEOM classes are
- called <emphasis>geoms</emphasis>.</para>
-
- <para>Each GEOM class has several <quote>class methods</quote> that get called
- when there is no geom instance available (or they are simply not
- bound to a single instance):</para>
-
- <itemizedlist>
-
- <listitem><para><function>.init</function> is called when GEOM
- becomes aware of a GEOM class (when the kernel module
- gets loaded.)</para></listitem>
-
- <listitem><para><function>.fini</function> gets called when GEOM
- abandons the class (when the module gets
- unloaded)</para></listitem>
-
- <listitem><para><function>.taste</function> is called next, once for
- each provider the system has available. If applicable, this
- function will usually create and start a geom
- instance.</para></listitem>
-
- <listitem><para><function>.destroy_geom</function> is called when
- the geom should be disbanded</para></listitem>
-
- <listitem><para><function>.ctlconf</function> is called when user
- requests reconfiguration of existing geom</para></listitem>
-
+ <para>GEOM classes are transformations on the data. These
+ transformations can be combined in a tree-like fashion.
+ Instances of GEOM classes are called
+ <emphasis>geoms</emphasis>.</para>
+
+ <para>Each GEOM class has several <quote>class methods</quote>
+ that get called when there is no geom instance available (or
+ they are simply not bound to a single instance):</para>
+
+ <itemizedlist>
+ <listitem>
+ <para><function>.init</function> is called when GEOM becomes
+ aware of a GEOM class (when the kernel module gets
+ loaded.)</para>
+ </listitem>
+
+ <listitem>
+ <para><function>.fini</function> gets called when GEOM
+ abandons the class (when the module gets
+ unloaded)</para>
+ </listitem>
+
+ <listitem>
+ <para><function>.taste</function> is called next, once for
+ each provider the system has available. If applicable,
+ this function will usually create and start a geom
+ instance.</para>
+ </listitem>
+
+ <listitem>
+ <para><function>.destroy_geom</function> is called when the
+ geom should be disbanded</para>
+ </listitem>
+
+ <listitem>
+ <para><function>.ctlconf</function> is called when user
+ requests reconfiguration of existing
+ geom</para>
+ </listitem>
</itemizedlist>
<para>Also defined are the GEOM event functions, which will get
- copied to the geom instance.</para>
+ copied to the geom instance.</para>
- <para>Field <function>.geom</function> in the
- <varname remap="structname">g_class</varname> structure is a LIST of geoms
- instantiated from the class.</para>
-
- <para>These functions are called from the g_event kernel thread.</para>
+ <para>Field <function>.geom</function> in the <varname
+ remap="structname">g_class</varname> structure is a LIST of
+ geoms instantiated from the class.</para>
+ <para>These functions are called from the g_event kernel
+ thread.</para>
</sect2>
<sect2 xml:id="geom-softc">
<title>Softc</title>
<para>The name <quote>softc</quote> is a legacy term for
- <quote>driver private data</quote>. The name most probably
- comes from the archaic term <quote>software control block</quote>.
- In GEOM, it is a structure (more precise: pointer to a
- structure) that can be attached to a geom instance to hold
- whatever data is private to the geom instance. Most GEOM classes
- have the following members:</para>
-
- <itemizedlist>
- <listitem><para><varname>struct g_provider *provider</varname> : The
- <quote>provider</quote> this geom instantiates</para></listitem>
-
- <listitem><para><varname>uint16_t n_disks</varname> : Number of
- consumer this geom consumes</para></listitem>
-
- <listitem><para><varname>struct g_consumer **disks</varname> : Array
- of <varname>struct g_consumer*</varname>. (It is not possible
- to use just single indirection because struct g_consumer*
- are created on our behalf by GEOM).</para></listitem>
- </itemizedlist>
-
- <para>The <varname remap="structname">softc</varname> structure contains all
- the state of geom instance. Every geom instance has its own
- softc.</para>
+ <quote>driver private data</quote>. The name most probably
+ comes from the archaic term <quote>software control
+ block</quote>. In GEOM, it is a structure (more precise:
+ pointer to a structure) that can be attached to a geom
+ instance to hold whatever data is private to the geom
+ instance. Most GEOM classes have the following
+ members:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para><varname>struct g_provider *provider</varname> : The
+ <quote>provider</quote> this geom
+ instantiates</para>
+ </listitem>
+
+ <listitem>
+ <para><varname>uint16_t n_disks</varname> : Number of
+ consumer this geom consumes</para>
+ </listitem>
+
+ <listitem>
+ <para><varname>struct g_consumer **disks</varname> : Array
+ of <varname>struct g_consumer*</varname>. (It is not
+ possible to use just single indirection because struct
+ g_consumer* are created on our behalf by
+ GEOM).</para>
+ </listitem>
+ </itemizedlist>
+
+ <para>The <varname remap="structname">softc</varname> structure
+ contains all the state of geom instance. Every geom instance
+ has its own softc.</para>
</sect2>
<sect2 xml:id="geom-metadata">
<title>Metadata</title>
<para>Format of metadata is more-or-less class-dependent, but
- MUST start with:</para>
+ MUST start with:</para>
<itemizedlist>
+ <listitem>
+ <para>16 byte buffer for null-terminated signature (usually
+ the class name)</para>
+ </listitem>
- <listitem><para>16 byte buffer for null-terminated signature
- (usually the class name)</para></listitem>
-
- <listitem><para>uint32 version ID</para></listitem>
-
+ <listitem>
+ <para>uint32 version ID</para>
+ </listitem>
</itemizedlist>
- <para>It is assumed that geom classes know how to handle metadata
- with version ID's lower than theirs.</para>
+ <para>It is assumed that geom classes know how to handle
+ metadata with version ID's lower than theirs.</para>
<para>Metadata is located in the last sector of the provider
- (and thus must fit in it).</para>
+ (and thus must fit in it).</para>
<para>(All this is implementation-dependent but all existing
- code works like that, and it is supported by libraries.)</para>
+ code works like that, and it is supported by
+ libraries.)</para>
</sect2>
<sect2 xml:id="geom-creating">
@@ -436,271 +491,327 @@ KMOD=geom_journal
<para>The sequence of events is:</para>
<itemizedlist>
-
- <listitem><para>user calls &man.geom.8; utility (or one of its
- hardlinked friends)</para></listitem>
-
- <listitem><para>the utility figures out which geom class it is
- supposed to handle and searches for
- <filename>geom_<replaceable>CLASSNAME</replaceable>.so</filename>
- library (usually in
- <filename>/lib/geom</filename>).</para></listitem>
-
- <listitem><para>it &man.dlopen.3;-s the library, extracts the
- definitions of command-line parameters and helper
- functions.</para></listitem>
-
+ <listitem>
+ <para>user calls &man.geom.8; utility (or one of its
+ hardlinked friends)</para>
+ </listitem>
+
+ <listitem>
+ <para>the utility figures out which geom class it is
+ supposed to handle and searches for
+ <filename>geom_<replaceable>CLASSNAME</replaceable>.so</filename>
+ library (usually in
+ <filename>/lib/geom</filename>).</para>
+ </listitem>
+
+ <listitem>
+ <para>it &man.dlopen.3;-s the library, extracts the
+ definitions of command-line parameters and helper
+ functions.</para>
+ </listitem>
</itemizedlist>
<para>In the case of creating/labeling a new geom, this is what
- happens:</para>
+ happens:</para>
<itemizedlist>
-
- <listitem><para>&man.geom.8; looks in the command-line argument
- for the command (usually <option>label</option>), and calls a helper
- function.</para></listitem>
-
- <listitem><para>The helper function checks parameters and gathers
- metadata, which it proceeds to write to all concerned
- providers.</para></listitem>
-
- <listitem><para>This <quote>spoils</quote> existing geoms (if any) and
- initializes a new round of <quote>tasting</quote> of the providers. The
- intended geom class recognizes the metadata and brings the
- geom up.</para></listitem>
-
+ <listitem>
+ <para>&man.geom.8; looks in the command-line argument for
+ the command (usually <option>label</option>), and calls a
+ helper function.</para>
+ </listitem>
+
+ <listitem>
+ <para>The helper function checks parameters and gathers
+ metadata, which it proceeds to write to all concerned
+ providers.</para>
+ </listitem>
+
+ <listitem>
+ <para>This <quote>spoils</quote> existing geoms (if any) and
+ initializes a new round of <quote>tasting</quote> of the
+ providers. The intended geom class recognizes the
+ metadata and brings the geom up.</para>
+ </listitem>
</itemizedlist>
<para>(The above sequence of events is implementation-dependent
- but all existing code works like that, and it is supported by
- libraries.)</para>
-
+ but all existing code works like that, and it is supported by
+ libraries.)</para>
</sect2>
<sect2 xml:id="geom-command">
<title>GEOM Command Structure</title>
<para>The helper <filename>geom_CLASSNAME.so</filename> library
- exports <varname remap="structname">class_commands</varname> structure,
- which is an array of <varname remap="structname">struct g_command</varname>
- elements. Commands are of uniform format and look like:</para>
+ exports <varname remap="structname">class_commands</varname>
+ structure, which is an array of <varname
+ remap="structname">struct g_command</varname> elements.
+ Commands are of uniform format and look like:</para>
<programlisting> verb [-options] geomname [other]</programlisting>
<para>Common verbs are:</para>
<itemizedlist>
-
- <listitem><para>label — to write metadata to devices so they can be
- recognized at tasting and brought up in geoms</para></listitem>
-
- <listitem><para>destroy — to destroy metadata, so the geoms get
- destroyed</para></listitem>
-
+ <listitem>
+ <para>label — to write metadata to devices so they can
+ be recognized at tasting and brought up in
+ geoms</para>
+ </listitem>
+
+ <listitem>
+ <para>destroy — to destroy metadata, so the geoms get
+ destroyed</para>
+ </listitem>
</itemizedlist>
<para>Common options are:</para>
<itemizedlist>
- <listitem><para><literal>-v</literal> : be verbose</para></listitem>
- <listitem><para><literal>-f</literal> : force</para></listitem>
+ <listitem>
+ <para><literal>-v</literal> : be verbose</para>
+ </listitem>
+
+ <listitem>
+ <para><literal>-f</literal> : force</para>
+ </listitem>
</itemizedlist>
<para>Many actions, such as labeling and destroying metadata can
- be performed in userland. For this, <varname remap="structname">struct
- g_command</varname> provides field
- <varname>gc_func</varname> that can be set to a function (in
- the same <filename>.so</filename>) that will be called to
- process a verb. If <varname>gc_func</varname> is NULL, the
- command will be passed to kernel module, to
- <function>.ctlreq</function> function of the geom
- class.</para>
+ be performed in userland. For this, <varname
+ remap="structname">struct g_command</varname> provides field
+ <varname>gc_func</varname> that can be set to a function (in
+ the same <filename>.so</filename>) that will be called to
+ process a verb. If <varname>gc_func</varname> is NULL, the
+ command will be passed to kernel module, to
+ <function>.ctlreq</function> function of the geom
+ class.</para>
</sect2>
<sect2 xml:id="geom-geoms">
<title>Geoms</title>
- <para>Geoms are instances of GEOM classes. They have internal
- data (a softc structure) and some functions with which they
- respond to external events.</para>
+ <para>Geoms are instances of GEOM classes. They have internal
+ data (a softc structure) and some functions with which they
+ respond to external events.</para>
<para>The event functions are:</para>
<itemizedlist>
- <listitem><para><function>.access</function> : calculates
- permissions (read/write/exclusive)</para></listitem>
-
- <listitem><para><function>.dumpconf</function> : returns
- XML-formatted information about the geom</para></listitem>
-
- <listitem><para><function>.orphan</function> : called when some
- underlying provider gets disconnected</para></listitem>
-
- <listitem><para><function>.spoiled</function> : called when some
- underlying provider gets written to</para></listitem>
-
- <listitem><para><function>.start</function> : handles I/O</para></listitem>
- </itemizedlist>
-
- <para>These functions are called from the <function>g_down</function>
- kernel thread and there can be no sleeping in this context,
- (see definition of sleeping elsewhere) which limits what can be done
- quite a bit, but forces the handling to be fast.</para>
+ <listitem>
+ <para><function>.access</function> : calculates permissions
+ (read/write/exclusive)</para>
+ </listitem>
+
+ <listitem>
+ <para><function>.dumpconf</function> : returns XML-formatted
+ information about the geom</para>
+ </listitem>
+
+ <listitem>
+ <para><function>.orphan</function> : called when some
+ underlying provider gets disconnected</para>
+ </listitem>
+
+ <listitem>
+ <para><function>.spoiled</function> : called when some
+ underlying provider gets written to</para>
+ </listitem>
+
+ <listitem>
+ <para><function>.start</function> : handles I/O</para>
+ </listitem>
+ </itemizedlist>
+
+ <para>These functions are called from the
+ <function>g_down</function> kernel thread and there can be no
+ sleeping in this context, (see definition of sleeping
+ elsewhere) which limits what can be done quite a bit, but
+ forces the handling to be fast.</para>
<para>Of these, the most important function for doing actual
- useful work is the <function>.start</function>() function,
- which is called when a BIO request arrives for a provider
- managed by a instance of geom class.</para>
+ useful work is the <function>.start</function>() function,
+ which is called when a BIO request arrives for a provider
+ managed by a instance of geom class.</para>
</sect2>
<sect2 xml:id="geom-threads">
<title>GEOM Threads</title>
<para>There are three kernel threads created and run by the GEOM
- framework:</para>
+ framework:</para>
<itemizedlist>
- <listitem><para><literal>g_down</literal> : Handles requests coming
- from high-level entities (such as a userland request) on the
- way to physical devices</para></listitem>
-
- <listitem><para><literal>g_up</literal> : Handles responses from
- device drivers to requests made by higher-level
- entities</para></listitem>
-
- <listitem><para><literal>g_event</literal> : Handles all other
- cases: creation of geom instances, access counting, <quote>spoil</quote>
- events, etc.</para></listitem>
+ <listitem>
+ <para><literal>g_down</literal> : Handles requests coming
+ from high-level entities (such as a userland request) on
+ the way to physical devices</para>
+ </listitem>
+
+ <listitem>
+ <para><literal>g_up</literal> : Handles responses from
+ device drivers to requests made by higher-level
+ entities</para>
+ </listitem>
+
+ <listitem>
+ <para><literal>g_event</literal> : Handles all other cases:
+ creation of geom instances, access counting,
+ <quote>spoil</quote> events, etc.</para>
+ </listitem>
</itemizedlist>
<para>When a user process issues <quote>read data X at offset Y
- of a file</quote> request, this is what happens:</para>
+ of a file</quote> request, this is what happens:</para>
<itemizedlist>
-
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/svn-doc-all
To unsubscribe, send any mail to "[email protected]"