git: d33a51fb5a - main - 15.0: Regenerate hardware notes for nda and sdhci

Alexander Ziaee <[email protected]>
Newsgroups gmane.os.freebsd.devel.cvs.doc
Message-ID <[email protected]>
The branch main has been updated by ziaee:

URL: https://cgit.FreeBSD.org/doc/commit/?id=d33a51fb5ac045866664d47f9ba2f85e38903958

commit d33a51fb5ac045866664d47f9ba2f85e38903958
Author:     Alexander Ziaee <[email protected]>
AuthorDate: 2025-10-03 18:27:42 +0000
Commit:     Alexander Ziaee <[email protected]>
CommitDate: 2025-10-03 18:27:42 +0000

    15.0: Regenerate hardware notes for nda and sdhci
---
 website/content/en/releases/15.0R/hardware.adoc | 50 ++++++++++++++++++-------
 1 file changed, 37 insertions(+), 13 deletions(-)

diff --git a/website/content/en/releases/15.0R/hardware.adoc b/website/content/en/releases/15.0R/hardware.adoc
index 804a9d4139..2d48956ae7 100644
--- a/website/content/en/releases/15.0R/hardware.adoc
+++ b/website/content/en/releases/15.0R/hardware.adoc
@@ -1122,6 +1122,16 @@ ATAPI and non-DMA ATA commands executed one by one for each port.
 
 
 
+The
+**nda**
+driver supports NVMe
+(Non-Volatile Memory Express)
+storage devices connected via PCIe or over NVMF
+(NVMe over Fabric)
+via the CAM subsystem.
+
+
+
 The
 **ocs_fc**
 driver supports these Fibre Channel adapters:
@@ -1186,6 +1196,33 @@ controller.
 
 
 
+The
+**sdhci**
+driver supports the SD Host Controller Specification.
+When attaching via the PCI bus,
+the controller is automatically configured.
+Many SoC chips provide a SDHCI controller directly mapped to I/O memory.
+For those, the controller may be configured using
+fdt(4)
+or
+acpi(4)
+methods, supplied by your board's vendor.
+
+Unlike most other drivers that support a generic standard,
+**sdhci**
+requires a large number of quirks to cope with hardware bugs,
+proprietary registers and poorly specified power management.
+While many chipsets from
+Intel, Xilinx, Rockchip, Frescale, Ricoh, and TI have these entries,
+suboptimal performance may result when using some controllers.
+Quirks and custom configuration are most often required
+when the device is configured via
+fdt(4)
+or
+acpi(4).
+
+
+
 The
 **siis**
 driver supports the following controller chips:
@@ -4914,19 +4951,6 @@ The driver supports Family codes 0x10, 0x22, 0x28, and 0x3b.
 
 
 
-The
-**sdhci**
-driver supports different specification compatible chips.
-The following chips have been verified to work:
-
-*	ENE CB712
-*	ENE CB714
-*	RICOH R5C822
-*	RICOH R5CE823
-*	TI PCIXX21/XX11/XX12
-
-
-
 The
 **superio**
 driver supports a multitude of Super I/O controllers produced by Nuvoton,
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.