Re: WLI2-CB-G54L doesn't work

At Wed, 30 Mar 2005 04:22:54 +0000 (GMT),
Bill Paul wrote:
> 
> > At Wed, 23 Mar 2005 09:17:01 +0900,
> > Yoichi Nakayama wrote:
> > > 
> > > At Mon, 21 Mar 2005 19:44:44 +0900,
> > > Yoichi Nakayama wrote:
> > > > I invoked pciconf -l -v and it describes the card as
> > > > none6@pci1:0:0: class=0x020000 card=0x03341154 chip=0x222017fe rev=0x00 hdr=0x00
> > > >     vendor   = 'InProComm Inc'
> > > >     class    = network
> > > >     subclass = ethernet
> > > > 
> > > > http://pciids.sourceforge.net/pci.ids saids
> > > > 17fe  Linksys, A Division of Cisco Systems
> > > >    2220  [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
> > > > 
> > > > I noticed I have misthought that it has ath chip, and I looked at
> > > >   http://buffalo.melcoinc.co.jp/download/driver/lan/wdrv.html (in Japanese)
> > > > again. Then I found that I've wrongly looked at WLI-CB-AG54L spec instead
> > > > of WLI2-CB-G54L which I have.
> > > 
> > > Then I tried ndis driver, but I got following panic on "ifconfig ndis0 up":
> > > panic: _mtx_lock_sleep: recursed on non-recursive mutex ndis softc lock @ /usr/src/sys/modules/ndis/../../compat/ndis/kern_ndis.c:1463
> > > It is caused by recursive lock introduced in if_ndis.c rev 1.82.
> > 
> > I've cvsup'ed current box yesterday and confirmed that
> > the problem has gone. Thanks for the fix!
> > -- 
> > Yoichi NAKAYAMA
> 
> Does this mean your card actually works now with the NDISulator?
> I haven't been able to get my hands on a NIC with an InProComm
> chipset for testing yet, and nobody else has reported to me if
> it works or not. If you can confirm that it works with Project Evil,
> I would really appreciate it.

Yes! The card works fine as ndis0, by using i2220.sys and
NET2G54L.inf, on FreeBSD-current.
-- 
Yoichi NAKAYAMA
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"