Re: HP nx9005 and Netgear WG511T

Quoting Kirill Ponomarew <[email protected]>:

> Please, switch to plain text content

Right. Sorry; crappy default settings.

>
> On Sat, Aug 20, 2005 at 04:43:35PM +0200, Dylan Wylie wrote:
>> Did it work on any previous builds? My 5212 ath woks fine with a
>> build from the 13th.
>
> I didn't try this NIC on another releases than 7 current.
>
>> ath0: Atheros 5212 mem 0x88000000-0x8800ffff irq 10 at device 0.0 on 
>> cardbus0
>> ath0: [GIANT-LOCKED]
>> ath0: Ethernet address: 00:0d:54:98:a8:35
>> ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
>
>> This is a 3com CRPAG175.  Why don't I see any ghz info in yours?
>> Could a 'faulty' radio produce both of your error messages, I
>> wonder?  Isn't there a radio on/off switch somewhere? What about
>> ifconfig's txpower switch or powersave?  Just shoot'n.  Did this
>> card EVER work?
>
> You're able to run it on HP Compaq nx9005 ?
Older compaq's; one pressario1600 and a E500
>
> I'm afraid there is something more broken than ath driver.  After
> unplugging the card, I'm also getting on console:
>
> ath0: ath_reset: unable to reset hardware; hal status 3229953940
> ath0: hardware error; resetting
> ath0: ath_chan_set: unable to reset channel 6 (2437 Mhz)
> ath0: ath_reset: unable to reset hardware; hal status 3229953940
> ath0: detached
>
> -Kirill
>
So,what cardbus hardware for an nx9005?
for presario 1600 it's:
cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0

I am still curious if you can get the card to work on _any_ other machine?
The messages on uplugging would't realy worry me actually; it does detach
eventualy. Could be wrong though.
Perhaps some-one else can enlighten us on the ghz stuff: does it have 
any 'real'
value, or is it just some hardware string?
DW

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"