Re: HP nx9005 and Netgear WG511T

On Sat, Aug 20, 2005 at 06:10:31PM +0200, Dylan Wylie wrote:
> >You're able to run it on HP Compaq nx9005 ?
> Older compaq's; one pressario1600 and a E500
> >
> >I'm afraid there is something more broken than ath driver.  After
> >unplugging the card, I'm also getting on console:
> >
> >ath0: ath_reset: unable to reset hardware; hal status 3229953940
> >ath0: hardware error; resetting
> >ath0: ath_chan_set: unable to reset channel 6 (2437 Mhz)
> >ath0: ath_reset: unable to reset hardware; hal status 3229953940
> >ath0: detached
> >
> >-Kirill
> >
> So,what cardbus hardware for an nx9005?
> for presario 1600 it's:
> cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0

cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 11 at device 10.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0

cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> at device 10.1 on pci0
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKF:0)
pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKF
cbb1: [MPSAFE]

> I am still curious if you can get the card to work on _any_ other machine?

Yes, the card works perfect on all another machines.

> The messages on uplugging would't realy worry me actually; it does
> detach eventualy. Could be wrong though.  Perhaps some-one else
> can enlighten us on the ghz stuff: does it have any 'real' value,
> or is it just some hardware string?

-Kirill

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (FreeBSD)

iD8DBQFDB1j8QC1G6a60JuURAmVtAJ0Tben6Uxk5xCvHkuzRL9NcCSlbkwCfWxb6
4T4NzRqWtMBFY+2rqpcDs/8=
=aOeT
-----END PGP SIGNATURE-----