Toshiba ToPIC95B not working on 6.0-BETA4
Niels Heinen <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Hi all, I recently received a Toshiba 460CDT and am trying to get the most out of it. Its an old device but should still be usable. Unfortunately I can't get PCMCIA to work. In the BIOS you can configure the 'PC Card controller mode'. When I set it to PCIC compatible, I see nothing in the dmesg. When I set it to CardBus/16-but I see that the slots are detected. However, whenever I insert a PCMCIA device, like my Prims/2 based NIC, which works fine in my other FreeBSD devices, I get: CIS is too long -- truncating pccard0: Card has no functions! cbb0: PC Card card activation failed This must be a bug.. maybe its in the Toshiba ToPIC95B support ? I attached the following files: cardbus-pciconf.txt pciconf while using CardBus/16-but dmesg-cardbus.txt dmesg while using CardBus/16-but dmesg-pcic.txt dmesg while using PCIC compatibile mode Any help is appriciated ! ;-) Niels _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"
cardbus-pciconf.txt
(text/plain, 1.2 KB)
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x06011179 rev=0xa7 hdr=0x00
vendor = 'Toshiba America Information Systems'
device = 'Pentium Host Bridge for Notebooks'
class = bridge
subclass = HOST-PCI
cbb0@pci0:2:0: class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
vendor = 'Toshiba America Information Systems'
device = 'ToPIC95B Toshiba ToPIC95 CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:2:1: class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
vendor = 'Toshiba America Information Systems'
device = 'ToPIC95B Toshiba ToPIC95 CardBus Controller'
class = bridge
subclass = PCI-CardBus
none0@pci0:4:0: class=0x030000 card=0x00000000 chip=0x00e4102c rev=0xc2 hdr=0x00
vendor = 'Asiliant (Chips And Technologies)'
device = '65554 Flat Panel/LCD CRT GUI Accelerator'
class = display
subclass = VGA
ohci0@pci0:11:0: class=0x0c0310 card=0x00000000 chip=0x00351033 rev=0x01 hdr=0x00
vendor = 'NEC Electronics Hong Kong'
device = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI compliant)'
class = serial bus
subclass = USB
dmesg-cardbus.txt
(text/plain, 15.7 KB)
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA4 #1: Mon Nov 18 06:32:17 CET 2002
root@:/usr/src/sys/i386/compile/TOSHI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc085f000.
Calibrating clock(s) ... i8254 clock: 1193106 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 165790095 Hz
CPU: Pentium/P55C (165.79-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 33685504 (32 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x0000000001f56fff, 20127744 bytes (4914 pages)
avail memory = 23515136 (22 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f8e20
bios32: Entry = 0xfe95b (c00fe95b) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdcf1
pnpbios: Found PnP BIOS data at 0xc00f8e30
pnpbios: Entry = f0000:9c9f Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 2932f351
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
wlan: <802.11 Link Layer>
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001850
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179)
pcibios: BIOS version 2.10
Found $PIR table, 3 entries at 0xc00f97e0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x1 255 N 5 3 4 5 6 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.11.INTA at func 0: 11
$PIR: Found matching pin for 0.2.INTA at func 0: 11
$PIR: Found matching pin for 0.2.INTB at func 1: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x1 11 Y 5 3 4 5 6 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 0 0 0 0 5 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1179, dev=0x0601, revid=0xa7
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1179, dev=0x060a, revid=0x07
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0004, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
$PIR: 0:2 INTA routed to irq 11
found-> vendor=0x1179, dev=0x060a, revid=0x07
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0004, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
$PIR: 0:2 INTB routed to irq 11
found-> vendor=0x102c, dev=0x00e4, revid=0xc2
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fe000000, size 24, enabled
found-> vendor=0x1033, dev=0x0035, revid=0x01
bus=0, slot=11, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0a00, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base fdfff000, size 12, enabled
$PIR: 0:11 INTA routed to irq 11
cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x060a1179 0x04800007 0x06070007 0x00820000
0x10: 0x80000000 0x04800000 0x00141400 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000002 0x00000000
0x90: 0x00000001 0x00000000 0x00000000 0x00000000
0xa0: 0x86001cf0 0x00000002 0x00000000 0x0000fd80
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.1 on pci0
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x060a1179 0x04800007 0x06070007 0x00820000
0x10: 0x80001000 0x04800000 0x00151500 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000002 0x00000000
0x90: 0x00000001 0x00000000 0x00000000 0x00000000
0xa0: 0x86002cf0 0x00000002 0x00000000 0x0000fd80
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pci0: <display, VGA> at device 4.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdfff000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0: <ISA bus> on motherboard
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 18 devices, largest 192 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x201ffff, size=0x1f20000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
TOS7400: adding irq mask 0x1000
pnpbios: handle 8 device ID TOS7400 (0074f351)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1
PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1
PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
PNP0600: adding irq mask 0x4000
pnpbios: handle 12 device ID PNP0600 (0006d041)
PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1
PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1
PNP0600: adding irq mask 0x8000
pnpbios: handle 13 device ID PNP0600 (0006d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 16 device ID PNP0401 (0104d041)
pnpbios: handle 17 device ID PNP0a03 (030ad041)
pnpbios: handle 22 device ID TOS7009 (0970f351)
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x2
YMH0021: adding dma mask 0x1
pnpbios: handle 23 device ID YMH0021 (2100a865)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x0f msb=0x0f
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 80 part_id 80
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 80 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x201ffff on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <TOS7400> can't assign resources (irq)
unknown: <TOS7400> at irq 12 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0600> can't assign resources (port)
unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0600> can't assign resources (port)
unknown: <PNP0600> at port 0x170-0x177 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37a on isa0
unknown: <TOS7009> failed to probe on isa0
unknown: <YMH0021> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 1,0 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 165790095 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master PIO4
ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire
acd0: <TOSHIBA CD-ROM XM-1502BN/1001> CDROM drive at ata1 as master
acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3
acd0: Reads: CDR, CDDA, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
CIS is too long -- truncating
pccard0: Card has no functions!
cbb0: PC Card card activation failed
GEOM: new disk ad0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
dmesg-pcic.txt
(text/plain, 12.9 KB)
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA4 #1: Mon Nov 18 06:32:17 CET 2002
root@:/usr/src/sys/i386/compile/TOSHI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc085f000.
Calibrating clock(s) ... i8254 clock: 1193096 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 165790005 Hz
CPU: Pentium/P55C (165.79-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 33685504 (32 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x0000000001f56fff, 20127744 bytes (4914 pages)
avail memory = 23515136 (22 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f8e20
bios32: Entry = 0xfe95b (c00fe95b) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdcf1
pnpbios: Found PnP BIOS data at 0xc00f8e30
pnpbios: Entry = f0000:9c9f Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 2932f351
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
wlan: <802.11 Link Layer>
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001850
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179)
pcibios: BIOS version 2.10
Found $PIR table, 1 entries at 0xc00f97e0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 1 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x1 255 N 1 3 4 5 6 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.11.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x1 11 Y 1 3 4 5 6 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1179, dev=0x0601, revid=0xa7
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x102c, dev=0x00e4, revid=0xc2
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fe000000, size 24, enabled
found-> vendor=0x1033, dev=0x0035, revid=0x01
bus=0, slot=11, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0a00, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base fdfff000, size 12, enabled
$PIR: 0:11 INTA routed to irq 11
pci0: <display, VGA> at device 4.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdfff000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0: <ISA bus> on motherboard
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 19 devices, largest 192 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x201ffff, size=0x1f20000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
TOS7400: adding irq mask 0x1000
pnpbios: handle 8 device ID TOS7400 (0074f351)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1
PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1
PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
PNP0600: adding irq mask 0x4000
pnpbios: handle 12 device ID PNP0600 (0006d041)
PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1
PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1
PNP0600: adding irq mask 0x8000
pnpbios: handle 13 device ID PNP0600 (0006d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 16 device ID PNP0401 (0104d041)
pnpbios: handle 17 device ID PNP0a03 (030ad041)
PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
pnpbios: handle 20 device ID PNP0e00 (000ed041)
pnpbios: handle 22 device ID TOS7009 (0970f351)
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x2
YMH0021: adding dma mask 0x1
pnpbios: handle 23 device ID YMH0021 (2100a865)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x0f msb=0x0f
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 80 part_id 80
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 80 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x201ffff on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <TOS7400> can't assign resources (irq)
unknown: <TOS7400> at irq 12 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0600> can't assign resources (port)
unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0600> can't assign resources (port)
unknown: <PNP0600> at port 0x170-0x177 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37a on isa0
unknown: <PNP0e00> failed to probe at port 0x3e0-0x3e1 on isa0
unknown: <TOS7009> failed to probe on isa0
unknown: <YMH0021> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 1,0 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 165790005 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master PIO4
ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire
acd0: <TOSHIBA CD-ROM XM-1502BN/1001> CDROM drive at ata1 as master
acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3
acd0: Reads: CDR, CDDA, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
GEOM: new disk ad0
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 16 files 4
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 12 files 1
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 36 files 10
Linux ELF exec handler installed