Re: Toshiba ToPIC95B not working on 6.0-BETA4

Niels Heinen <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]> 

Already replying to my own mail.. sorry..

Attached some more debug info that might give someone a clue.. 

Cheers,

Niels

On Tue, Sep 13, 2005 at 11:53:42AM +0200, Niels Heinen wrote:
> 
> Hi all,
> 
> I recently received a Toshiba 460CDT and am trying to get
> the most out of it. Its an old device but should still be
> usable. Unfortunately I can't get PCMCIA to work.
> 
> In the BIOS you can configure the 'PC Card controller mode'. When I
> set it to PCIC compatible, I see nothing in the dmesg.  When I set
> it to CardBus/16-but I see that the slots are detected.
> 
> However, whenever I insert a PCMCIA device, like my Prims/2 based
> NIC, which works fine in my other FreeBSD devices, I get:
> 
> CIS is too long -- truncating
> pccard0: Card has no functions!
> cbb0: PC Card card activation failed
> 
> This must be a bug.. maybe its in the Toshiba ToPIC95B support ?
> 
> I attached the following files:
> 
> cardbus-pciconf.txt   pciconf while using CardBus/16-but   
> dmesg-cardbus.txt     dmesg while using CardBus/16-but
> dmesg-pcic.txt        dmesg while using PCIC compatibile mode
> 
> Any help is appriciated ! ;-)
> 
> Niels
> 

> hostb0@pci0:0:0:	class=0x060000 card=0x00000000 chip=0x06011179 rev=0xa7 hdr=0x00
>     vendor   = 'Toshiba America Information Systems'
>     device   = 'Pentium Host Bridge for Notebooks'
>     class    = bridge
>     subclass = HOST-PCI
> cbb0@pci0:2:0:	class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
>     vendor   = 'Toshiba America Information Systems'
>     device   = 'ToPIC95B Toshiba ToPIC95 CardBus Controller'
>     class    = bridge
>     subclass = PCI-CardBus
> cbb1@pci0:2:1:	class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
>     vendor   = 'Toshiba America Information Systems'
>     device   = 'ToPIC95B Toshiba ToPIC95 CardBus Controller'
>     class    = bridge
>     subclass = PCI-CardBus
> none0@pci0:4:0:	class=0x030000 card=0x00000000 chip=0x00e4102c rev=0xc2 hdr=0x00
>     vendor   = 'Asiliant (Chips And Technologies)'
>     device   = '65554 Flat Panel/LCD CRT GUI Accelerator'
>     class    = display
>     subclass = VGA
> ohci0@pci0:11:0:	class=0x0c0310 card=0x00000000 chip=0x00351033 rev=0x01 hdr=0x00
>     vendor   = 'NEC Electronics Hong Kong'
>     device   = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI compliant)'
>     class    = serial bus
>     subclass = USB

> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA4 #1: Mon Nov 18 06:32:17 CET 2002
>     root@:/usr/src/sys/i386/compile/TOSHI
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc085f000.
> Calibrating clock(s) ... i8254 clock: 1193106 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 165790095 Hz
> CPU: Pentium/P55C (165.79-MHz 586-class CPU)
>   Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
>   Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory  = 33685504 (32 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000c25000 - 0x0000000001f56fff, 20127744 bytes (4914 pages)
> avail memory = 23515136 (22 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00f8e20
> bios32: Entry = 0xfe95b (c00fe95b)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xdcf1
> pnpbios: Found PnP BIOS data at 0xc00f8e30
> pnpbios: Entry = f0000:9c9f  Rev = 1.0
> pnpbios: Event flag at 510
> pnpbios: OEM ID 2932f351
> Other BIOS signatures found:
> Intel Pentium detected, installing workaround for F00F bug
> wlan: <802.11 Link Layer>
> mem: <memory>
> nfslock: pseudo-device
> null: <null device, zero device>
> io: <I/O>
> random: <entropy source, Software, Yarrow>
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> pci_open(1):	mode 1 addr port (0x0cf8) is 0x80001850
> pci_open(1a):	mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=06011179)
> pcibios: BIOS version 2.10
> Found $PIR table, 3 entries at 0xc00f97e0
> PCI-Only Interrupts: none
> Location  Bus Device Pin  Link  IRQs
> embedded    0   11    A   0x01  3 4 5 6 7 9 10 11 12 14 15
> embedded    0    2    A   0x01  3 4 5 6 7 9 10 11 12 14 15
> embedded    0    2    B   0x01  3 4 5 6 7 9 10 11 12 14 15
> slot 1      0    6    A   0x01  3 4 5 6 7 9 10 11 12 14 15
> slot 1      0    6    B   0x01  3 4 5 6 7 9 10 11 12 14 15
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard
> $PIR: Links after initial probe:
> Link  IRQ  Rtd  Ref  IRQs
>  0x1  255   N     5  3 4 5 6 7 9 10 11 12 14 15
> $PIR: Found matching pin for 0.11.INTA at func 0: 11
> $PIR: Found matching pin for 0.2.INTA at func 0: 11
> $PIR: Found matching pin for 0.2.INTB at func 1: 11
> $PIR: Links after initial IRQ discovery:
> Link  IRQ  Rtd  Ref  IRQs
>  0x1   11   Y     5  3 4 5 6 7 9 10 11 12 14 15
> $PIR: IRQs used by BIOS: 11
> $PIR: Interrupt Weights:
> [    0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15 ]
> [    0   0   0   0   0   0   0   0   0   0   0   5   0   0   0   0 ]
> pci0: <PCI bus> on pcib0
> pci0: physical bus=0
> found->	vendor=0x1179, dev=0x0601, revid=0xa7
> 	bus=0, slot=0, func=0
> 	class=06-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x1179, dev=0x060a, revid=0x07
> 	bus=0, slot=2, func=0
> 	class=06-07-00, hdrtype=0x02, mfdev=1
> 	cmdreg=0x0004, statreg=0x0480, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=11
> 	map[10]: type 1, range 32, base 00000000, size 12, memory disabled
> $PIR: 0:2 INTA routed to irq 11
> found->	vendor=0x1179, dev=0x060a, revid=0x07
> 	bus=0, slot=2, func=1
> 	class=06-07-00, hdrtype=0x02, mfdev=1
> 	cmdreg=0x0004, statreg=0x0480, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=b, irq=11
> 	map[10]: type 1, range 32, base 00000000, size 12, memory disabled
> $PIR: 0:2 INTB routed to irq 11
> found->	vendor=0x102c, dev=0x00e4, revid=0xc2
> 	bus=0, slot=4, func=0
> 	class=03-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	map[10]: type 1, range 32, base fe000000, size 24, enabled
> found->	vendor=0x1033, dev=0x0035, revid=0x01
> 	bus=0, slot=11, func=0
> 	class=0c-03-10, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0006, statreg=0x0a00, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns)
> 	intpin=a, irq=11
> 	map[10]: type 1, range 32, base fdfff000, size 12, enabled
> $PIR: 0:11 INTA routed to irq 11
> cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.0 on pci0
> cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
> pccard0: <16-bit PCCard bus> on cbb0
> cbb0: [MPSAFE]
> cbb0: PCI Configuration space:
>   0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 
>   0x10: 0x80000000 0x04800000 0x00141400 0xfffff000 
>   0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 
>   0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 
>   0x40: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x80: 0x00000000 0x00000000 0x00000002 0x00000000 
>   0x90: 0x00000001 0x00000000 0x00000000 0x00000000 
>   0xa0: 0x86001cf0 0x00000002 0x00000000 0x0000fd80 
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 
> cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.1 on pci0
> cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000
> pccard1: <16-bit PCCard bus> on cbb1
> cbb1: [MPSAFE]
> cbb1: PCI Configuration space:
>   0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 
>   0x10: 0x80001000 0x04800000 0x00151500 0xfffff000 
>   0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 
>   0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b 
>   0x40: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x80: 0x00000000 0x00000000 0x00000002 0x00000000 
>   0x90: 0x00000001 0x00000000 0x00000000 0x00000000 
>   0xa0: 0x86002cf0 0x00000002 0x00000000 0x0000fd80 
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 
> pci0: <display, VGA> at device 4.0 (no driver attached)
> ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0
> ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdfff000
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0
> usb0: <NEC uPD 9210 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isa0: <ISA bus> on motherboard
> ex_isa_identify()
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> pnpbios: 18 devices, largest 192 bytes
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
> PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
> PNP0c01: adding fixed memory32 range 0x100000-0x201ffff, size=0x1f20000
> PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
> pnpbios: handle 1 device ID PNP0c01 (010cd041)
> PNP0200: adding io range 0-0xf, size=0x10, align=0x1
> PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
> PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
> PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
> PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
> PNP0200: adding dma mask 0x10
> pnpbios: handle 2 device ID PNP0200 (0002d041)
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
> PNP0100: adding irq mask 0x1
> pnpbios: handle 4 device ID PNP0100 (0001d041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
> pnpbios: handle 5 device ID PNP0800 (0008d041)
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
> PNP0c04: adding irq mask 0x2000
> pnpbios: handle 6 device ID PNP0c04 (040cd041)
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
> PNP0303: adding irq mask 0x2
> pnpbios: handle 7 device ID PNP0303 (0303d041)
> TOS7400: adding irq mask 0x1000
> pnpbios: handle 8 device ID TOS7400 (0074f351)
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
> PNP0b00: adding irq mask 0x100
> pnpbios: handle 9 device ID PNP0b00 (000bd041)
> PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
> PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
> PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
> PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
> PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
> PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
> PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
> PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
> PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1
> PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1
> PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
> PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
> PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
> pnpbios: handle 10 device ID PNP0c02 (020cd041)
> PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
> PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
> PNP0700: adding irq mask 0x40
> PNP0700: adding dma mask 0x4
> pnpbios: handle 11 device ID PNP0700 (0007d041)
> PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
> PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
> PNP0600: adding irq mask 0x4000
> pnpbios: handle 12 device ID PNP0600 (0006d041)
> PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1
> PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1
> PNP0600: adding irq mask 0x8000
> pnpbios: handle 13 device ID PNP0600 (0006d041)
> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
> PNP0501: adding irq mask 0x10
> pnpbios: handle 14 device ID PNP0501 (0105d041)
> PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
> PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
> PNP0401: adding irq mask 0x80
> PNP0401: adding dma mask 0x8
> pnpbios: handle 16 device ID PNP0401 (0104d041)
> pnpbios: handle 17 device ID PNP0a03 (030ad041)
> pnpbios: handle 22 device ID TOS7009 (0970f351)
> YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1
> YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
> YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1
> YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1
> YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1
> YMH0021: adding irq mask 0x20
> YMH0021: adding dma mask 0x2
> YMH0021: adding dma mask 0x1
> pnpbios: handle 23 device ID YMH0021 (2100a865)
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ata0: [MPSAFE]
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x01 lsb=0x0f msb=0x0f
> ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
> ata1: [MPSAFE]
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model GlidePoint, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0: ic_type 80 part_id 80
> fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: ic_type 80 part_id 80
> fdc0: [MPSAFE]
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> ppc0: parallel port found at 0x378
> ppc0: using extended I/O port range
> ppc0: ECP SPP SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x1 0x1 0x1 0x1
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> unknown: <PNP0c01> can't assign resources (memory)
> unknown: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x201ffff on isa0
> unknown: <PNP0800> failed to probe at port 0x61 on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0303> at port 0x60 on isa0
> unknown: <TOS7400> can't assign resources (irq)
> unknown: <TOS7400> at irq 12 on isa0
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
> unknown: <PNP0600> can't assign resources (port)
> unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0
> unknown: <PNP0600> can't assign resources (port)
> unknown: <PNP0600> at port 0x170-0x177 on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0401> at port 0x378-0x37a on isa0
> unknown: <TOS7009> failed to probe on isa0
> unknown: <YMH0021> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 1,0 on isa0
> Device configuration finished.
> procfs registered
> Timecounter "TSC" frequency 165790095 Hz quality 800
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master PIO4
> ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire
> acd0: <TOSHIBA CD-ROM XM-1502BN/1001> CDROM drive at ata1 as master
> acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3
> acd0: Reads: CDR, CDDA, packet
> acd0: Writes:
> acd0: Audio: play, 255 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> ATA PseudoRAID loaded
> CIS is too long -- truncating
> pccard0: Card has no functions!
> cbb0: PC Card card activation failed
> GEOM: new disk ad0
> Trying to mount root from ufs:/dev/ad0s1a
> start_init: trying /sbin/init
> Linux ELF exec handler installed

> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA4 #1: Mon Nov 18 06:32:17 CET 2002
>     root@:/usr/src/sys/i386/compile/TOSHI
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc085f000.
> Calibrating clock(s) ... i8254 clock: 1193096 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 165790005 Hz
> CPU: Pentium/P55C (165.79-MHz 586-class CPU)
>   Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
>   Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory  = 33685504 (32 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000c25000 - 0x0000000001f56fff, 20127744 bytes (4914 pages)
> avail memory = 23515136 (22 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00f8e20
> bios32: Entry = 0xfe95b (c00fe95b)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xdcf1
> pnpbios: Found PnP BIOS data at 0xc00f8e30
> pnpbios: Entry = f0000:9c9f  Rev = 1.0
> pnpbios: Event flag at 510
> pnpbios: OEM ID 2932f351
> Other BIOS signatures found:
> Intel Pentium detected, installing workaround for F00F bug
> wlan: <802.11 Link Layer>
> mem: <memory>
> nfslock: pseudo-device
> null: <null device, zero device>
> io: <I/O>
> random: <entropy source, Software, Yarrow>
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> pci_open(1):	mode 1 addr port (0x0cf8) is 0x80001850
> pci_open(1a):	mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=06011179)
> pcibios: BIOS version 2.10
> Found $PIR table, 1 entries at 0xc00f97e0
> PCI-Only Interrupts: none
> Location  Bus Device Pin  Link  IRQs
> embedded    0   11    A   0x01  3 4 5 6 7 9 10 11 12 14 15
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 1 Entries> on motherboard
> $PIR: Links after initial probe:
> Link  IRQ  Rtd  Ref  IRQs
>  0x1  255   N     1  3 4 5 6 7 9 10 11 12 14 15
> $PIR: Found matching pin for 0.11.INTA at func 0: 11
> $PIR: Links after initial IRQ discovery:
> Link  IRQ  Rtd  Ref  IRQs
>  0x1   11   Y     1  3 4 5 6 7 9 10 11 12 14 15
> $PIR: IRQs used by BIOS: 11
> $PIR: Interrupt Weights:
> [    0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15 ]
> [    0   0   0   0   0   0   0   0   0   0   0   1   0   0   0   0 ]
> pci0: <PCI bus> on pcib0
> pci0: physical bus=0
> found->	vendor=0x1179, dev=0x0601, revid=0xa7
> 	bus=0, slot=0, func=0
> 	class=06-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x102c, dev=0x00e4, revid=0xc2
> 	bus=0, slot=4, func=0
> 	class=03-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	map[10]: type 1, range 32, base fe000000, size 24, enabled
> found->	vendor=0x1033, dev=0x0035, revid=0x01
> 	bus=0, slot=11, func=0
> 	class=0c-03-10, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0006, statreg=0x0a00, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns)
> 	intpin=a, irq=11
> 	map[10]: type 1, range 32, base fdfff000, size 12, enabled
> $PIR: 0:11 INTA routed to irq 11
> pci0: <display, VGA> at device 4.0 (no driver attached)
> ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0
> ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdfff000
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0
> usb0: <NEC uPD 9210 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isa0: <ISA bus> on motherboard
> ex_isa_identify()
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> pnpbios: 19 devices, largest 192 bytes
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
> PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
> PNP0c01: adding fixed memory32 range 0x100000-0x201ffff, size=0x1f20000
> PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
> pnpbios: handle 1 device ID PNP0c01 (010cd041)
> PNP0200: adding io range 0-0xf, size=0x10, align=0x1
> PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
> PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
> PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
> PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
> PNP0200: adding dma mask 0x10
> pnpbios: handle 2 device ID PNP0200 (0002d041)
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
> PNP0100: adding irq mask 0x1
> pnpbios: handle 4 device ID PNP0100 (0001d041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
> pnpbios: handle 5 device ID PNP0800 (0008d041)
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
> PNP0c04: adding irq mask 0x2000
> pnpbios: handle 6 device ID PNP0c04 (040cd041)
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
> PNP0303: adding irq mask 0x2
> pnpbios: handle 7 device ID PNP0303 (0303d041)
> TOS7400: adding irq mask 0x1000
> pnpbios: handle 8 device ID TOS7400 (0074f351)
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
> PNP0b00: adding irq mask 0x100
> pnpbios: handle 9 device ID PNP0b00 (000bd041)
> PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
> PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
> PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
> PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
> PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
> PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
> PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
> PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
> PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1
> PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1
> PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
> PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
> PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
> pnpbios: handle 10 device ID PNP0c02 (020cd041)
> PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
> PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
> PNP0700: adding irq mask 0x40
> PNP0700: adding dma mask 0x4
> pnpbios: handle 11 device ID PNP0700 (0007d041)
> PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
> PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
> PNP0600: adding irq mask 0x4000
> pnpbios: handle 12 device ID PNP0600 (0006d041)
> PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1
> PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1
> PNP0600: adding irq mask 0x8000
> pnpbios: handle 13 device ID PNP0600 (0006d041)
> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
> PNP0501: adding irq mask 0x10
> pnpbios: handle 14 device ID PNP0501 (0105d041)
> PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
> PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
> PNP0401: adding irq mask 0x80
> PNP0401: adding dma mask 0x8
> pnpbios: handle 16 device ID PNP0401 (0104d041)
> pnpbios: handle 17 device ID PNP0a03 (030ad041)
> PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
> pnpbios: handle 20 device ID PNP0e00 (000ed041)
> pnpbios: handle 22 device ID TOS7009 (0970f351)
> YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1
> YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
> YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1
> YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1
> YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1
> YMH0021: adding irq mask 0x20
> YMH0021: adding dma mask 0x2
> YMH0021: adding dma mask 0x1
> pnpbios: handle 23 device ID YMH0021 (2100a865)
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ata0: [MPSAFE]
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x01 lsb=0x0f msb=0x0f
> ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
> ata1: [MPSAFE]
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model GlidePoint, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0: ic_type 80 part_id 80
> fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: ic_type 80 part_id 80
> fdc0: [MPSAFE]
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> ppc0: parallel port found at 0x378
> ppc0: using extended I/O port range
> ppc0: ECP SPP SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x1 0x1 0x1 0x1
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> unknown: <PNP0c01> can't assign resources (memory)
> unknown: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x201ffff on isa0
> unknown: <PNP0800> failed to probe at port 0x61 on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0303> at port 0x60 on isa0
> unknown: <TOS7400> can't assign resources (irq)
> unknown: <TOS7400> at irq 12 on isa0
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
> unknown: <PNP0600> can't assign resources (port)
> unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0
> unknown: <PNP0600> can't assign resources (port)
> unknown: <PNP0600> at port 0x170-0x177 on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0401> at port 0x378-0x37a on isa0
> unknown: <PNP0e00> failed to probe at port 0x3e0-0x3e1 on isa0
> unknown: <TOS7009> failed to probe on isa0
> unknown: <YMH0021> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 1,0 on isa0
> Device configuration finished.
> procfs registered
> Timecounter "TSC" frequency 165790005 Hz quality 800
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master PIO4
> ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire
> acd0: <TOSHIBA CD-ROM XM-1502BN/1001> CDROM drive at ata1 as master
> acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3
> acd0: Reads: CDR, CDDA, packet
> acd0: Writes:
> acd0: Audio: play, 255 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> ATA PseudoRAID loaded
> GEOM: new disk ad0
> Trying to mount root from ufs:/dev/ad0s1a
> WARNING: / was not properly dismounted
> start_init: trying /sbin/init
> WARNING: /tmp was not properly dismounted
> /tmp: mount pending error: blocks 16 files 4
> WARNING: /usr was not properly dismounted
> /usr: mount pending error: blocks 12 files 1
> WARNING: /var was not properly dismounted
> /var: mount pending error: blocks 36 files 10
> Linux ELF exec handler installed

> _______________________________________________
> [email protected] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "[email protected]"

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
dmesg.debug (text/plain, 502 B) 
pccard0: chip_socket_enable
pccard0: read_cis
cis mem map 0xc4908000 (resource: 0x88000000)
pccard0: CIS tuple chain:
CISTPL_NONE
 00
CISTPL_NONE
 00
CISTPL_NONE
 00
CISTPL_NONE
 00
CISTPL_NONE
 00
CISTPL_NONE
 00
CISTPL_NONE
 00
CISTPL_NONE
 00
CISTPL_NONE
 00
CISTPL_NONE
 00
TOO MANY CIS_NONE
CIS is too long -- truncating
CISTPL_END
 ff
cis mem map c4908000
CISTPL_LINKTARGET expected, code 00 observed
pccard0: check_cis_quirks
pccard0: Card has no functions!
cbb0: PC Card card activation failed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.