Re: DWL-G520 rev. b3 (AR5213 chipset)

Francois Kritzinger <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
No worries, forgot to have a look at those posts of yours you mentioned.

Thanks :)

On 18/01/06, Francois Kritzinger <[email protected]> wrote:
> Cool, but will this patch work against 6.0-RELEASE?
>
> On 17/01/06, Sam Leffler <[email protected]> wrote:
> > Francois Kritzinger wrote:
> > > Hi
> > >
> > > Is this card (DWL-G520 rev. b3  with the AR5213 chipset ) supported in
> > > 6.0 yet? Because it doesn't appear to be:
> > >
> > > ----------------------------------------------
> > > pciconf -lv:
> > > ath0@pci0:6:0:        class=0x020000 card=0x3a131186 chip=0x0013168c rev=0x01 hdr=0x00
> > >     vendor   = 'Atheros Communications Inc.'
> > >     device   = 'AR5213 802.11a/b/g Wireless Adapter'
> > >     class    = network
> > >     subclass = ethernet
> > >
> > > dmesg:
> > > ath0: <Atheros 5212> mem 0xdffe0000-0xdffeffff irq 17 at device 6.0 on pci0
> > > ath0: unable to attach hardware; HAL status 13
> > > device_attach: ath0 attach returned 6
> > > ----------------------------------------------
> > >
> > > If not, will it be sometime soon?
> > >
> > > Also, the reason I bought this card was because ath(4) explicitly says
> > > that the DWL-G520 rev. b works in 5.4 and 6.0, which is a lie in the
> > > case of rev. b3, so someone should update this manpage. Of course,
> > > this was probably before D-LInk decided to upgrade this card's chipset
> > > to the AR5213 (the manpage thinks this card has the AR5212 chipset).
> >
> > There's a hal out for test at www.freebsd.org/~sam; it should handle the
> > part.  See previous postings from me to current@.
> >
> >         Sam
> >
> >
> >
>
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.