Re: bug
"Kevin Oberman" <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
> From: <[email protected]> > Date: Sun, 25 Jun 2006 17:31:37 +0400 > Sender: [email protected] > > Hi! > I"ve a problem at the first step of installation FreeBSD 6.1 on my "Acer > Aspire 1670". > I install FreeBSD 6.1 from CD set(CD1:FreeBSD_Install and > CD2:FreeBSD_Packages) > I insert CD1,make first boot device CDrom in BIOS,and reboot. > Then I can see: > _______________________________________________________________________________ > CD Loader 1.2 > > Building the boot loader arguments > Looking up /BOOT/LOADER...Found > Relocating the loader and theBTX > Starting the BTX loader > > BTX loader 1.00 BTX version is 1.01 > Consoles: internal video/keyboard > BIOS CD is cd0 > BIOS drive C: is disk0 > BIOS 638kB/522688kB available memory > > FreeBSD/i386 bootstrap loader,Revision 1.1 > ([email protected],Sun May 7 03:20:03 UTC 2006) > Loading /boot/defaults/loader.conf > /boot/kernel/kernel text=0x4c8c74 data=0x98120+0x4f08c > syms=[0x4+0x649f0+0x4+0x7c102] > -------------------------------------------------------------------------------------------------------------------------------------------next > screen was: > ------------------------------------------------------------------------------------------------------------------------------------------ > Welcome to FreeBSD! > 1.Boot FreeBSD[default] > 2.Boot FreeBSD with ACPI disabled > 3.Boot FreeBSD in Safemode > 4.Boot FreeBSD in single user mode > 5.Boot FreeBSD with verbose logging > 6.Escape to loader promt > 7.Reboot > > > Select option,[Enter] for default > or [Space] to pause timer 10 > -------------------------------------------------------------------------------------------------------------------------------------- > I chose 1. and saw next: > -------------------------------------------------------------------------------------------------------------------------------------------- > /boot/kernel/acpi.ko text=0x42ed4/ data=0x2280+0x10f0 > syms=[0x4+0x7ad0+0x4+0xa709] > / > > That's all, installation process was terminated. > I tried 2.,3.,4.,5.,6. items and had the same result.I too tried > ,choosing 6.,to do next : > unset acpi_load[Enter]; boot [Enter].And it was in vain. > Please!Help if you can fix the problem. Shamil. mailto:[email protected] This is just a guess, but I think the console device may be switching to a different connection. This is the point where FreeBSD kernel takes over from the loader and, if the loader talks to one device and the kernel to another, it will seem to hang. If the console switched to a different device, this is exactly what you will see. Try connecting something to whichever device you are NOT using and see if it becomes active at this point. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: [email protected] Phone: +1 510 486-8634 _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"