Re: PRO/Wireless 3945ABG (Device not configured)
Daniel Eischen <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Sat, 22 Jul 2006, Torfinn Ingolfsen wrote: > On Sat, 22 Jul 2006 20:09:05 +0200 > Torfinn Ingolfsen <[email protected]> wrote: > >> But compiling wpi-freebsd fails (see attached error log) >> >> Iguess I must be doing something wromg here. Do I need to place this >> souce code (the driver) in /usr/src somewhere? > > It was something I wasn't doing. :-) > > I found out after lookking at the error log that I needed to link the > 'wpi' directory in the driver source to /sys/dev/wpi. > I had put the source in /home/tingo/work/wpi-freebsd, so I issued the > commands > cd /usr/src/sys > ln -s /home/tingo/work/wpi-freebsd/wpi > > and ''ifconfig wpi0': > root@kg-home# ifconfig wpi0 > wpi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > ether 00:13:02:3e:d4:ce > media: IEEE 802.11 Wireless Ethernet autoselect > status: no carrier > ssid "" channel 1 > authmode OPEN privacy OFF txpowmax 100 protmode CTS > > Looks good. Let's see if it works too. > Nope, it seems like the firmware framework (or module) is the problem. From /var/log/messages: > > (the last 3 lines repeats). > So, anything I can do to make the firmware work? Read my original email. Hint: kldload firmware.ko kldload wpi_ucode.ko kldload if_wpi.ko -- DE _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"