Thinkpad T510: LAN? CPU-C3?
Jan Henrik Sylvester <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
I would like to use FreeBSD on a Thinkpad T510. I installed 8-STABLE
(since iwn got 6000 support after 8.0-RELEASE).
*** Not working: (Any ideas?)
- LAN: The Intel ethernet card (class=0x020000 card=0x215317aa
chip=0x10ea8086 rev=0x06 hdr=0x00) is not working.
- CPU-C3: No C3 (dev.cpu.0.cx_supported: C1/3 C2/245) for i7-620M.
Battery life will not be good without C3, and Turbo Boost will not work
either. (Apparently, Linux got C3 support on a quick boot with a live CD.)
- A few more devices that I have not missed, yet.
*** Working:
- Graphics (nvidia): The proprietary nvidia driver works well.
- Sound (snd_hda): With hw.snd.default_unit=5, I got sound. The first 4
pcm devices are NVidia/DisplayPort, after that there are 2 "HDA
Conexant" with the second one playing sound.
- WLAN (if_iwn): Works with WPA.
- SD-card slot (mmc/mmcsd/sdhci): Works. (Fixed drive for HAL...)
- Webcam (cuse4bsd/webcamd): Works.
- Volume / mute keys: Working. (I did not expect that.)
*** Not tested:
- Touch pad with synaptics: Currently, the touch pad only works in X if
an USB mouse is plugged in. I have to check that later.
- Intel graphics: The i7-620M got integrated graphics. Reading
freebsd-x11, I do not expect that to work, yet. Testing dual graphics
has to wait.
- DisplayPort: I have to get a cable to test that.
- eSATA: I do not own a cable for that, either.
- Suspend/resume: Later.
- Microphone: Apparently, the micro is on unit4, but only unit5 plays a
sound. I have to find out how to use that, later.
- amd64: I just cloned an i386 install from another PC for a start.
I will attach dmesg, pciconf, and usbconfig below.
Cheers,
Jan Henrik
********** dmesg **********
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Sat Mar 27 11:19:07 CET 2010
root@nb895:/usr/obj/usr/src/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz (2660.03-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x20652 Family = 6 Model = 25
Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x298e3ff<SSE3,<b1>,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,<b25>>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 3120914432 (2976 MB)
ACPI APIC Table: <LENOVO TP-6M >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 5
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Cuse4BSD v0.1.9 @ /dev/cuse
kbd1 at kbdmux0
acpi0: <LENOVO TP-6M> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
acpi_sysresource2: Conflicts with PCI device 0:31:6
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem
0xcc000000-0xccffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 16
at device 0.0 on pci1
nvidia0: <NVS 3100M> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
hdac0: <NVidia (Unknown) High Definition Audio Controller> mem
0xcdefc000-0xcdefffff irq 16 at device 0.1 on pci1
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms, UART> at device 22.3 (no driver attached)
pci0: <network, ethernet> at device 25.0 (no driver attached)
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf2428000-0xf24283ff
irq 23 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
hdac1: <Intel PCH High Definition Audio Controller> mem
0xf2420000-0xf2423fff irq 17 at device 27.0 on pci0
hdac1: HDA Driver Revision: 20100226_0142
hdac1: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib4
iwn0: <Intel(R) PRO/Wireless 6000> mem 0xf2000000-0xf2001fff irq 17 at
device 0.0 on pci3
iwn0: MIMO 3T3R, MoW, address 00:24:d7:04:b9:dc
iwn0: [ITHREAD]
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib6
sdhci0: <Generic SD HCI> mem 0xf2100000-0xf21000ff irq 16 at device 0.0
on pci13
sdhci0: 1 slot(s) allocated
sdhci0: [ITHREAD]
pci13: <base peripheral> at device 0.1 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem 0xf2100800-0xf2100fff
irq 19 at device 0.3 on pci13
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1f:16:ff:38:04:ad:ff
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xbf2bc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1f:16:04:ad:ff
fwe0: Ethernet address: 02:1f:16:04:ad:ff
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1f:16:ff:38:04:ad:ff @ 0xfffe00000000, S400,
maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1,
CYCLEMASTER mode
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf2428400-0xf24287ff
irq 19 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci14: <ACPI PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port
0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x1840-0x185f
mem 0xf2427000-0xf24277ff irq 16 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.30 controller with 6 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <dasp> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xcf800-0xd07ff,0xd0800-0xd17ff,0xdd000-0xdffff,0xe0000-0xeffff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x51b offMax=0x753
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 476940MB <HITACHI HTS725050A9A364 PC4ZC70F> at ata2-master UDMA100
SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
GEOM: ad4: partition 4 does not start on a track boundary.
GEOM: ad4: partition 4 does not end on a track boundary.
GEOM: ad4: partition 3 does not start on a track boundary.
GEOM: ad4: partition 3 does not end on a track boundary.
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
GEOM: ad4: partition 1 does not start on a track boundary.
GEOM: ad4: partition 1 does not end on a track boundary.
acd0: DVDR <HL-DT-STDVDRAM GT30N/LT09> at ata3-master UDMA66 SATA 1.5Gb/s
hdac0: HDA Codec #0: NVidia (Unknown)
hdac0: HDA Codec #1: NVidia (Unknown)
hdac0: HDA Codec #2: NVidia (Unknown)
hdac0: HDA Codec #3: NVidia (Unknown)
pcm0: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 0 nid 1 on hdac0
pcm1: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 1 nid 1 on hdac0
pcm2: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 2 nid 1 on hdac0
pcm3: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 3 nid 1 on hdac0
hdac1: HDA Codec #0: Conexant (Unknown)
pcm4: <HDA Conexant (Unknown) PCM #0 Analog> at cad 0 nid 1 on hdac1
pcm5: <HDA Conexant (Unknown) PCM #1 Analog> at cad 0 nid 1 on hdac1
GEOM_JOURNAL: Journal 2063792986: ad4s4f contains data.
GEOM_JOURNAL: Journal 2063792986: ad4s4f contains journal.
GEOM_JOURNAL: Journal ad4s4f clean.
GEOM_JOURNAL: Journal 4289967981: ad4s4g contains data.
GEOM_JOURNAL: Journal 4289967981: ad4s4g contains journal.
GEOM_JOURNAL: Journal ad4s4g clean.
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2>
on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2>
on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <UPEK> at usbus0
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata3:0:0:0): CAM status: SCSI Status Error
(probe0:ata3:0:0:0): SCSI status: Check Condition
(probe0:ata3:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present
- tray closed)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GT30N LT09> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
ugen1.3: <Lenovo> at usbus1
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.4: <Chicony Electronics Co., Ltd.> at usbus0
Trying to mount root from ufs:/dev/ad4s4a
wlan0: Ethernet address: 00:24:d7:04:b9:dc
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
cryptosoft0: <software crypto> on motherboard
GEOM_ELI: Device ad4s4e.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI: Crypto: software
GEOM_JOURNAL: Journal 2562765565: ad4s4e.eli contains data.
GEOM_JOURNAL: Journal 2562765565: ad4s4e.eli contains journal.
GEOM_JOURNAL: Journal ad4s4e.eli clean.
ugen0.5: <Logitech> at usbus0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 5> on usbus0
ums0: 16 buttons and [XYZ] coordinates ID=0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 5> on usbus0
ugen1.4: <Kingston> at usbus1
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.10, addr 4> on
usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:2:0:-1: Attached to scbus2
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not
ready to ready change, medium may have changed)
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 954MB (1953792 512 byte sectors: 64H 32S/T 954C)
ugen1.4: <Kingston> at usbus1 (disconnected)
umass0: at uhub3, port 2, addr 4 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
mmc0: <MMC/SD bus> on sdhci0
mmc0: detached
mmc0: <MMC/SD bus> on sdhci0
mmcsd0: 14GB <SDHC Memory Card> at mmc0 50MHz/4bit
GEOM: mmcsd0: partition 1 does not start on a track boundary.
GEOM: mmcsd0: partition 1 does not end on a track boundary.
mmc0: detached
********** pciconf -lv **********
hostb0@pci0:255:0:0: class=0x060000 card=0x219617aa chip=0x2c628086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb1@pci0:255:0:1: class=0x060000 card=0x219617aa chip=0x2d018086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb2@pci0:255:2:0: class=0x060000 card=0x219617aa chip=0x2d108086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb3@pci0:255:2:1: class=0x060000 card=0x219617aa chip=0x2d118086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb4@pci0:255:2:2: class=0x060000 card=0x219617aa chip=0x2d128086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb5@pci0:255:2:3: class=0x060000 card=0x219617aa chip=0x2d138086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
hostb6@pci0:0:0:0: class=0x060000 card=0x219317aa chip=0x00448086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pcib2@pci0:0:1:0: class=0x060400 card=0x219417aa chip=0x00458086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
none0@pci0:0:22:0: class=0x078000 card=0x215f17aa chip=0x3b648086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = simple comms
none1@pci0:0:22:3: class=0x070002 card=0x216217aa chip=0x3b678086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = simple comms
subclass = UART
none2@pci0:0:25:0: class=0x020000 card=0x215317aa chip=0x10ea8086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
ehci0@pci0:0:26:0: class=0x0c0320 card=0x216317aa chip=0x3b3c8086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
hdac1@pci0:0:27:0: class=0x040300 card=0x215e17aa chip=0x3b568086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = multimedia
subclass = HDA
pcib3@pci0:0:28:0: class=0x060400 card=0x216417aa chip=0x3b428086
rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:1: class=0x060400 card=0x216417aa chip=0x3b448086
rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:3: class=0x060400 card=0x216417aa chip=0x3b488086
rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:28:4: class=0x060400 card=0x216417aa chip=0x3b4a8086
rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x216317aa chip=0x3b348086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pcib7@pci0:0:30:0: class=0x060401 card=0x216517aa chip=0x24488086
rev=0xa6 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to
PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x216617aa chip=0x3b078086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:2: class=0x010601 card=0x216817aa chip=0x3b2f8086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'IBEX AHCI Controller(6Port)'
class = mass storage
subclass = SATA
none3@pci0:0:31:3: class=0x0c0500 card=0x216717aa chip=0x3b308086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = SMBus
none4@pci0:0:31:6: class=0x118000 card=0x219017aa chip=0x3b328086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = dasp
vgapci0@pci0:1:0:0: class=0x030000 card=0x215c17aa chip=0x0a6c10de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
class = display
subclass = VGA
hdac0@pci0:1:0:1: class=0x040300 card=0x218f17aa chip=0x0be310de
rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = multimedia
subclass = HDA
iwn0@pci0:3:0:0: class=0x028000 card=0x11118086 chip=0x42388086 rev=0x35
hdr=0x00
vendor = 'Intel Corporation'
class = network
sdhci0@pci0:13:0:0: class=0x080500 card=0x213317aa chip=0xe8221180
rev=0x01 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
class = base peripheral
subclass = SD host controller
none5@pci0:13:0:1: class=0x088000 card=0x213417aa chip=0xe2301180
rev=0x01 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
class = base peripheral
fwohci0@pci0:13:0:3: class=0x0c0010 card=0x213617aa chip=0xe8321180
rev=0x01 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
class = serial bus
subclass = FireWire
********** usbconfig show_ifdrv **********
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen0.1.0: uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen1.1.0: uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
ugen0.2: <product 0x0020 vendor 0x8087> at usbus0, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE
ugen0.2.0: uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev
2.00/0.00, addr 2>
ugen1.2: <product 0x0020 vendor 0x8087> at usbus1, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE
ugen1.2.0: uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev
2.00/0.00, addr 2>
ugen0.3: <Biometric Coprocessor UPEK> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen1.3: <Integrated Smart Card Reader Lenovo> at usbus1, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
ugen0.4: <Integrated Camera Chicony Electronics Co., Ltd.> at usbus0,
cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen0.5: <USB Receiver Logitech> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen0.5.0: ums0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 5>
ugen0.5.1: uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 5>
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"