Re: Vaio R600, 5.2-Current - cbb0: Unsupported card type detected

On Tuesday 13 January 2004 07:26 pm, Oliver Enzmann wrote:
> Hi,
>
> After upgrading my Vaio R600 from 5.1-Current (last upgrade ~August '02)
> to 5.2-Current, I get "cbb0: Unsupported card type detected" for cards
> that ran fine under 5.1.
>
> I've tried "hw.pci.allow_unsupported_io_range=1" as well as
> "hw.cbb.start_memory=0x0800000" without success.

Try hw.cbb.start_memory=0xf4105800

> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0x3000-0x3fff
> pcib1:   memory decode     0xf4100000-0xf41fffff
> pcib1:   prefetched decode 0xfff00000-0xfffff
> pcib1:   Subtractively decoded bridge.
> fwohci0: <Texas Instruments TSB43AA22> mem
> 0xf4100000-0xf4103fff,0xf4105000-0xf41057ff irq 9 at device 0.0 on pci1
> pcib1: device fwohci0 requested decoded memory range 0xf4105000-0xf41057ff
> ...
> cbb0: <RF5C475 PCI-CardBus Bridge> at device 2.0 on pci1
> pcib1: device cbb0 requested decoded memory range 0xf4100000-0xf41fffff
> fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x3000-0x303f mem
> 0xf4104000-0xf4104fff irq 9 at device 8.0 on pci1 pcib1: device fxp0
> requested decoded memory range 0xf4104000-0xf4104fff fxp0: using memory
> space register mapping

-- 
John Baldwin <[email protected]>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"