(unknown)

Anyone had any experience with the following devices.  I cannot get them to work
on my Fujitsu P2120. Parts of dmesg and my kernel config are below.


none0@pci0:0:1:	class=0x050000 card=0x110e10cf chip=0x03961279 rev=0x00 hdr=0x00
    vendor   = 'Transmeta Corp.'
    device   = 'SDRAM Controller'
    class    = memory
    subclass = RAM
none1@pci0:0:2:	class=0x050000 card=0x110e10cf chip=0x03971279 rev=0x00 hdr=0x00
    vendor   = 'Transmeta Corp.'
    device   = 'BIOS scratchpad'
    class    = memory
    subclass = RAM
none2@pci0:6:0:	class=0x068000 card=0x10a310cf chip=0x710110b9 rev=0x00 hdr=0x00
    vendor   = 'Acer Labs Incorporated (ALi)'
    device   = 'ALI M7101 Power Management Controller'
    class    = bridge
    subclass = PCI-unknown
none3@pci0:9:0:	class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD9210/72010xx USB Open Host Controller'
    class    = serial bus
    subclass = USB
none4@pci0:9:1:	class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD9210/72010xx USB Open Host Controller'
    class    = serial bus
    subclass = USB
none5@pci0:9:2:	class=0x0c0320 card=0x11a310cf chip=0x00e01033 rev=0x02 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB


---dmesg----
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Wed Jan 21 16:01:34 PST 2004
..
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
..
alpm0: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0
alpm0: failed to enable port mapping!
alpm0: Could not allocate Bus space
device_probe_and_attach: alpm0 attach returned 6
..
ohci1: <NEC uPD 9210 USB controller> at device 9.0 on pci0
ohci1: Could not map memory
device_probe_and_attach: ohci1 attach returned 6
ohci1: <NEC uPD 9210 USB controller> at device 9.1 on pci0
ohci1: Could not map memory
device_probe_and_attach: ohci1 attach returned 6
ehci0: <NEC uPD 720100 USB 2.0 controller> at device 9.2 on pci0
ehci0: Could not map memory
device_probe_and_attach: ehci0 attach returned 6


---kernel config---
machine		i386
cpu		I586_CPU
ident		P2120
options 	SCHED_ULE
options 	INET			#InterNETworking
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	NFSCLIENT		#Network Filesystem Client
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		#Compatible with FreeBSD4
options		COMPAT_LINUX
options		LINPROCFS
options 	SCSI_DELAY=1000		#Delay (in ms) before probing SCSI
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
					# output.  Adds ~128k to driver.
					# output.  Adds ~215k to driver.
device		eisa
device		isa
device		pci
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse
device		vga		# VGA video card driver
device		splash		# Splash screen and screen saver support
device		sc
device		agp		# support several AGP chipsets
device		npx
device		cbb			# cardbus (yenta) bridge
device		pccard			# PC Card (16-bit) bus
device		cardbus			# CardBus (32-bit) bus
device		miibus		# MII bus support
device		rl		# RealTek 8129/8139
device		wlan		# 802.11 support
device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
device		random		# Entropy device
device		loop		# Network loopback
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		bpf		# Berkeley packet filter
device		firewire	# FireWire bus code
options 	VESA
device		radeondrm
options 	NETSMB			#SMB/CIFS requester
options 	NETSMBCRYPTO		#encrypted passw
options 	LIBMCHAIN
options 	SMBFS			#SMB/CIFS filesystem
				# needs CAM to be present (scbus & pass)
device		pcm
options 	LIBICONV
device      smbus       # Bus support, required for smb below.
device      alpm		# this is what the P uses for SMBUS
device      smb
device		iicbus		# Bus support, required for ic/iic/iicsmb below.
device		iicbb
device		 bktr	#brooktree848 I2C software interface
device		ic
device		iic
device		iicsmb		# smb over i2c bridge
device		ehci
device		ohci
device		usb
options 	IPFIREWALL		#firewall
options 	IPFIREWALL_VERBOSE	#enable logging to syslogd(8)
options 	IPFIREWALL_VERBOSE_LIMIT=100	#limit verbosity
options		IPDIVERT
device	pcf
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"