Sorry about the non subject, hopefully this will attract more attention.
On Wed, Jan 21, 2004 at 07:05:46PM -0800, [email protected] wrote:
> Anyone had any experience with the following devices. I cannot get them to work
> on my Fujitsu P2120. Parts of dmesg and my kernel config are below.
>
>
> none0@pci0:0:1: class=0x050000 card=0x110e10cf chip=0x03961279 rev=0x00 hdr=0x00
> vendor = 'Transmeta Corp.'
> device = 'SDRAM Controller'
> class = memory
> subclass = RAM
> none1@pci0:0:2: class=0x050000 card=0x110e10cf chip=0x03971279 rev=0x00 hdr=0x00
> vendor = 'Transmeta Corp.'
> device = 'BIOS scratchpad'
> class = memory
> subclass = RAM
> none2@pci0:6:0: class=0x068000 card=0x10a310cf chip=0x710110b9 rev=0x00 hdr=0x00
> vendor = 'Acer Labs Incorporated (ALi)'
> device = 'ALI M7101 Power Management Controller'
> class = bridge
> subclass = PCI-unknown
> none3@pci0:9:0: class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
> vendor = 'NEC Electronics Hong Kong'
> device = 'uPD9210/72010xx USB Open Host Controller'
> class = serial bus
> subclass = USB
> none4@pci0:9:1: class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
> vendor = 'NEC Electronics Hong Kong'
> device = 'uPD9210/72010xx USB Open Host Controller'
> class = serial bus
> subclass = USB
> none5@pci0:9:2: class=0x0c0320 card=0x11a310cf chip=0x00e01033 rev=0x02 hdr=0x00
> vendor = 'NEC Electronics Hong Kong'
> device = 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
> class = serial bus
> subclass = USB
>
>
> ---dmesg----
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.2-CURRENT #0: Wed Jan 21 16:01:34 PST 2004
> ..
> pci0: <memory, RAM> at device 0.1 (no driver attached)
> pci0: <memory, RAM> at device 0.2 (no driver attached)
> ..
> alpm0: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0
> alpm0: failed to enable port mapping!
> alpm0: Could not allocate Bus space
> device_probe_and_attach: alpm0 attach returned 6
> ..
> ohci1: <NEC uPD 9210 USB controller> at device 9.0 on pci0
> ohci1: Could not map memory
> device_probe_and_attach: ohci1 attach returned 6
> ohci1: <NEC uPD 9210 USB controller> at device 9.1 on pci0
> ohci1: Could not map memory
> device_probe_and_attach: ohci1 attach returned 6
> ehci0: <NEC uPD 720100 USB 2.0 controller> at device 9.2 on pci0
> ehci0: Could not map memory
> device_probe_and_attach: ehci0 attach returned 6
>
>
> ---kernel config---
> machine i386
> cpu I586_CPU
> ident P2120
> options SCHED_ULE
> options INET #InterNETworking
> options FFS #Berkeley Fast Filesystem
> options SOFTUPDATES #Enable FFS soft updates support
> options UFS_ACL #Support for access control lists
> options UFS_DIRHASH #Improve performance on big directories
> options NFSCLIENT #Network Filesystem Client
> options CD9660 #ISO 9660 Filesystem
> options PROCFS #Process filesystem (requires PSEUDOFS)
> options PSEUDOFS #Pseudo-filesystem framework
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
> options COMPAT_FREEBSD4 #Compatible with FreeBSD4
> options COMPAT_LINUX
> options LINPROCFS
> options SCSI_DELAY=1000 #Delay (in ms) before probing SCSI
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> # output. Adds ~128k to driver.
> # output. Adds ~215k to driver.
> device eisa
> device isa
> device pci
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
> device vga # VGA video card driver
> device splash # Splash screen and screen saver support
> device sc
> device agp # support several AGP chipsets
> device npx
> device cbb # cardbus (yenta) bridge
> device pccard # PC Card (16-bit) bus
> device cardbus # CardBus (32-bit) bus
> device miibus # MII bus support
> device rl # RealTek 8129/8139
> device wlan # 802.11 support
> device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
> device random # Entropy device
> device loop # Network loopback
> device ether # Ethernet support
> device sl # Kernel SLIP
> device ppp # Kernel PPP
> device tun # Packet tunnel.
> device pty # Pseudo-ttys (telnet etc)
> device bpf # Berkeley packet filter
> device firewire # FireWire bus code
> options VESA
> device radeondrm
> options NETSMB #SMB/CIFS requester
> options NETSMBCRYPTO #encrypted passw
> options LIBMCHAIN
> options SMBFS #SMB/CIFS filesystem
> # needs CAM to be present (scbus & pass)
> device pcm
> options LIBICONV
> device smbus # Bus support, required for smb below.
> device alpm # this is what the P uses for SMBUS
> device smb
> device iicbus # Bus support, required for ic/iic/iicsmb below.
> device iicbb
> device bktr #brooktree848 I2C software interface
> device ic
> device iic
> device iicsmb # smb over i2c bridge
> device ehci
> device ohci
> device usb
> options IPFIREWALL #firewall
> options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
> options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
> options IPDIVERT
> device pcf
> _______________________________________________
> [email protected] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "[email protected]"
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.