Re: ATA flash card under 4-STABLE
Attila Nagy <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Hello,
> card "128MB" "/ /*"
> config 0x1 "ata" ?
Sorry for being so lame, I solved this on saturday (see my previous mail).
The entry in /etc/pccard.conf was:
card "128MB" " "
config 0x1 "ata" ?
And the log snippet when I slip the card into its slot:
Mar 25 12:09:57 keksz /kernel: pccard: card inserted, slot 0
Mar 25 12:10:02 keksz pccardd[40]: Card "128MB"(" ") [5.0] [(null)] matched "128MB" (" ") [(null)] [(null)]
Mar 25 12:10:02 keksz pccardd[40]: Using I/O addr 0x240, size 16
Mar 25 12:10:02 keksz pccardd[40]: Setting config reg at offs 0x200 to 0x41, Reset time = 50 ms
Mar 25 12:10:07 keksz pccardd[40]: Assigning I/O window 0, start 0x240, size 0x10 flags 0x7
Mar 25 12:10:07 keksz /kernel: ata2 at port 0x240-0x247,0x24e irq 3 slot 0 on pccard0
Mar 25 12:10:07 keksz /kernel: ad4: 122MB <Hitachi ATA 6.1> [978/8/32] at ata2-master BIOSPIO
Mar 25 12:10:07 keksz pccardd[40]: Assign ata0, io 0x240-0x24f, mem 0x0, 0 bytes, irq 3, flags 0
Mar 25 12:10:07 keksz pccardd[40]: ata2: 128MB ( ) inserted.
Could you please add this entry to /etc/defaults/pccard.conf?
The card is a PQI 128 MB flash and the PCMCIA device is a PCM-3110.
> You can't have pccard root in stable.
That's great, because it means that I can have pccard root in -current. :)
How should I do that?
(I'm currently upgrading the machine to -current)
Thanks for your help!
--------[ Free Software ISOs - ftp://ftp.fsn.hu/pub/CDROM-Images/ ]-------
Attila Nagy e-mail: [email protected]
Free Software Network (FSN.HU) phone @work: +361 210 1415 (194)
cell.: +3630 306 6758
To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message