Re: Thinkpad 600E and 5.2
"Kevin Oberman" <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
> Date: Sat, 31 Jul 2004 14:21:04 -0700 > From: Gary Kline <[email protected]> > Sender: [email protected] > > On Sat, Jul 31, 2004 at 05:39:21PM +0100, Scott Mitchell wrote: > > On Thu, Jul 29, 2004 at 10:08:44AM -0700, Gary Kline wrote: > > > Closer. After I rebuild the kernel with target OLDCARD, and > > > rebooted (withh Xircom Ethernet II 10/100 inserted, no more > > > kernel traps. > > > > > > I added > > > > > > pccard_ether xe0 start link0 > > > > > > to rc.conf and rebooted. Zero. The cabling is solid. > > > The defaultrouter="10.0.0.1" entry doesn't seem to > > > have any effect. I set get the "Setup PC-CARD" message > > > when coming up. How do I get into this setup? Am I > > > missing some sysctl cmd? Anything else? > > > > > > gary > > > > Hi Gary, > > > > Could you post your full /etc/rc.conf and /var/run/dmesg.boot? The > > hardware you've got there should work, so I'm guessing this is just a > > configuration issue. > > > > For reference, the only stuff I have in my rc.conf to enable xe0 on my > > TP380D is: > > ifconfig_xe0="DHCP" > > pccard_enable="YES" > > > > If you're not using DHCP, obviously put something else in the ifconfig_xe0 > > line. Using pccard_enable is important - you're running an OLDCARD kernel > > so you need to make sure that pccardd is started to attach the card. > > > > Hm. I'm running GENERIC again, after running with the OLDCARD > configuration failed. The system does recognize my Xircom, > but as "dc0" But when I boot with ifconfig_dc0="DHCP" I > run into 'watchdog timeout' errs (prob'ly from dhclient). > > My card is a Xircom Ethernet II 10/100 CBE2-100. If your > card is identical, I'll go back to the OLDCARD conf and > try again. Don't bother trying OLDCARD. The CBE2-100 is a CardBus card and will not work with OLDCARD at all. I have almost the same card, the RBEM100-56G. This is the Realport version that also includes a 56K Global modem. This card does use the dc(4) driver. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: [email protected] Phone: +1 510 486-8634 _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"