Re:[speedstep] testers wanted

Jochen Gensch <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
 > I just finished a speedstep driver for p3m and p4m but it's a little bit
 > ugly, and worst it would work only with ich chipsets.  Even worst, I
 > don't have the hardware so I can't test it.

I don't if I have the correct hardware, but I gave it a try since I have 
IBM Thinkpad A30p here with a lot of ICH things inside. But I need some 
more input on what data you need...

Some things...

System 5.3-BETA4

SU NB /:dmesg | grep ICH
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 
0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 
0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 
0x1840-0x185f irq 9 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 
0xc0200000-0xc0200fff irq 10 at device 8.0 on pci2
atapci0: <Intel ICH3 UDMA100 controller> port 
0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at 
device 31.5 on pci0
ichist0: <Intel ICH3m LPC bridge> on motherboard


SU NB /:sysctl -a | grep ich
dev.ichist.0.%desc: Intel ICH3m LPC bridge
dev.ichist.0.%driver: ichist
dev.ichist.0.%parent: nexus0
dev.ichist.0.speedstep: 0


SU NB /:sysctl -a | grep acpi
acpidev    73     3K      3K       73  32
acpisem    21     2K      2K       21  64
acpitask     0     0K      1K      290  16,32
acpica  3218   166K    166K    29902  16,32,64,128,256,512,1024,2048
acpibatt     1     1K      1K        1  16
debug.acpi.acpi_ca_version: 0x20040527
debug.acpi.semaphore_debug: 0
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/0 C2/84 C3/120
hw.acpi.cpu.cx_lowest: C3
hw.acpi.cpu.cx_usage: 0.00% 100.00% 0.00%
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 3272
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 3647
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 3702
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.battery.life: 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 1012816
dev.acpi.0.%desc: IBM TP-1E
dev.acpi.0.%driver: acpi
dev.acpi.0.%parent: nexus0
dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT
dev.acpi_ec.0.%driver: acpi_ec
dev.acpi_ec.0.%location: handle=\_SB_.PCI0.LPC_.EC__
dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=0
dev.acpi_ec.0.%parent: acpi0
dev.acpi_sysresource.0.%desc: System Resource
dev.acpi_sysresource.0.%driver: acpi_sysresource
dev.acpi_sysresource.0.%location: handle=\_SB_.MEM_
dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0
dev.acpi_sysresource.0.%parent: acpi0
dev.acpi_sysresource.1.%desc: System Resource
dev.acpi_sysresource.1.%driver: acpi_sysresource
dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.LPC_.SIO_
dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=0
dev.acpi_sysresource.1.%parent: acpi0
dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz
dev.acpi_timer.0.%driver: acpi_timer
dev.acpi_timer.0.%location: unknown
dev.acpi_timer.0.%pnpinfo: unknown
dev.acpi_timer.0.%parent: acpi0
dev.cpu.0.%parent: acpi0
dev.acpi_tz.0.%desc: Thermal Zone
dev.acpi_tz.0.%driver: acpi_tz
dev.acpi_tz.0.%location: handle=\_TZ_.THM0
dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0
dev.acpi_tz.0.%parent: acpi0
dev.acpi_lid.0.%desc: Control Method Lid Switch
dev.acpi_lid.0.%driver: acpi_lid
dev.acpi_lid.0.%location: handle=\_SB_.LID_
dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0
dev.acpi_lid.0.%parent: acpi0
dev.acpi_lid.0.wake: 1
dev.acpi_button.0.%desc: Sleep Button
dev.acpi_button.0.%driver: acpi_button
dev.acpi_button.0.%location: handle=\_SB_.SLPB
dev.acpi_button.0.%pnpinfo: _HID=PNP0C0E _UID=0
dev.acpi_button.0.%parent: acpi0
dev.acpi_button.0.wake: 1
dev.pcib.0.%parent: acpi0
dev.atpic.0.%parent: acpi0
dev.attimer.0.%parent: acpi0
dev.attimer.1.%parent: acpi0
dev.atdma.0.%parent: acpi0
dev.npxisa.0.%parent: acpi0
dev.atkbdc.0.%parent: acpi0
dev.psmcpnp.0.%parent: acpi0
dev.fdc.0.%parent: acpi0
dev.sio.0.%parent: acpi0
dev.sio.1.%parent: acpi0
dev.ppc.0.%parent: acpi0
dev.acpi_cmbat.0.%desc: Control Method Battery
dev.acpi_cmbat.0.%driver: acpi_cmbat
dev.acpi_cmbat.0.%location: handle=\_SB_.PCI0.LPC_.EC__.BAT0
dev.acpi_cmbat.0.%pnpinfo: _HID=PNP0C0A _UID=0
dev.acpi_cmbat.0.%parent: acpi0
dev.acpi_acad.0.%desc: AC Adapter
dev.acpi_acad.0.%driver: acpi_acad
dev.acpi_acad.0.%location: handle=\_SB_.PCI0.LPC_.EC__.AC__
dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0
dev.acpi_acad.0.%parent: acpi0

Cheers, Jochen
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.