> > I just finished a speedstep driver for p3m and p4m but it's a little bit
> > ugly, and worst it would work only with ich chipsets. Even worst, I
> > don't have the hardware so I can't test it.
>
> I don't if I have the correct hardware, but I gave it a try since I have
> IBM Thinkpad A30p here with a lot of ICH things inside. But I need some
> more input on what data you need...
>
> Some things...
>
> System 5.3-BETA4
>
> SU NB /:dmesg | grep ICH
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
> 0x1800-0x181f irq 9 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
> 0x1820-0x183f irq 11 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
> 0x1840-0x185f irq 9 at device 29.2 on pci0
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem
> 0xc0200000-0xc0200fff irq 10 at device 8.0 on pci2
> atapci0: <Intel ICH3 UDMA100 controller> port
> 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at
> device 31.5 on pci0
> ichist0: <Intel ICH3m LPC bridge> on motherboard
>
>
> SU NB /:sysctl -a | grep ich
> dev.ichist.0.%desc: Intel ICH3m LPC bridge
> dev.ichist.0.%driver: ichist
> dev.ichist.0.%parent: nexus0
> dev.ichist.0.speedstep: 0
>
>
> SU NB /:sysctl -a | grep acpi
> acpidev 73 3K 3K 73 32
> acpisem 21 2K 2K 21 64
> acpitask 0 0K 1K 290 16,32
> acpica 3218 166K 166K 29902 16,32,64,128,256,512,1024,2048
> acpibatt 1 1K 1K 1 16
> debug.acpi.acpi_ca_version: 0x20040527
> debug.acpi.semaphore_debug: 0
> hw.acpi.supported_sleep_state: S3 S4 S5
> hw.acpi.power_button_state: S5
> hw.acpi.sleep_button_state: S3
> hw.acpi.lid_switch_state: NONE
> hw.acpi.standby_state: S1
> hw.acpi.suspend_state: S3
> hw.acpi.sleep_delay: 1
> hw.acpi.s4bios: 0
> hw.acpi.verbose: 0
> hw.acpi.reset_video: 1
> hw.acpi.cpu.cx_supported: C1/0 C2/84 C3/120
> hw.acpi.cpu.cx_lowest: C3
> hw.acpi.cpu.cx_usage: 0.00% 100.00% 0.00%
> hw.acpi.thermal.min_runtime: 0
> hw.acpi.thermal.polling_rate: 10
> hw.acpi.thermal.tz0.temperature: 3272
> hw.acpi.thermal.tz0.active: -1
> hw.acpi.thermal.tz0.thermal_flags: 0
> hw.acpi.thermal.tz0._PSV: 3647
> hw.acpi.thermal.tz0._HOT: -1
> hw.acpi.thermal.tz0._CRT: 3702
> hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
> hw.acpi.battery.life: 100
> hw.acpi.battery.time: -1
> hw.acpi.battery.state: 0
> hw.acpi.battery.units: 1
> hw.acpi.battery.info_expire: 5
> hw.acpi.acline: 1
> machdep.acpi_timer_freq: 3579545
> machdep.acpi_root: 1012816
> dev.acpi.0.%desc: IBM TP-1E
> dev.acpi.0.%driver: acpi
> dev.acpi.0.%parent: nexus0
> dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT
> dev.acpi_ec.0.%driver: acpi_ec
> dev.acpi_ec.0.%location: handle=\_SB_.PCI0.LPC_.EC__
> dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=0
> dev.acpi_ec.0.%parent: acpi0
> dev.acpi_sysresource.0.%desc: System Resource
> dev.acpi_sysresource.0.%driver: acpi_sysresource
> dev.acpi_sysresource.0.%location: handle=\_SB_.MEM_
> dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0
> dev.acpi_sysresource.0.%parent: acpi0
> dev.acpi_sysresource.1.%desc: System Resource
> dev.acpi_sysresource.1.%driver: acpi_sysresource
> dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.LPC_.SIO_
> dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=0
> dev.acpi_sysresource.1.%parent: acpi0
> dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz
> dev.acpi_timer.0.%driver: acpi_timer
> dev.acpi_timer.0.%location: unknown
> dev.acpi_timer.0.%pnpinfo: unknown
> dev.acpi_timer.0.%parent: acpi0
> dev.cpu.0.%parent: acpi0
> dev.acpi_tz.0.%desc: Thermal Zone
> dev.acpi_tz.0.%driver: acpi_tz
> dev.acpi_tz.0.%location: handle=\_TZ_.THM0
> dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0
> dev.acpi_tz.0.%parent: acpi0
> dev.acpi_lid.0.%desc: Control Method Lid Switch
> dev.acpi_lid.0.%driver: acpi_lid
> dev.acpi_lid.0.%location: handle=\_SB_.LID_
> dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0
> dev.acpi_lid.0.%parent: acpi0
> dev.acpi_lid.0.wake: 1
> dev.acpi_button.0.%desc: Sleep Button
> dev.acpi_button.0.%driver: acpi_button
> dev.acpi_button.0.%location: handle=\_SB_.SLPB
> dev.acpi_button.0.%pnpinfo: _HID=PNP0C0E _UID=0
> dev.acpi_button.0.%parent: acpi0
> dev.acpi_button.0.wake: 1
> dev.pcib.0.%parent: acpi0
> dev.atpic.0.%parent: acpi0
> dev.attimer.0.%parent: acpi0
> dev.attimer.1.%parent: acpi0
> dev.atdma.0.%parent: acpi0
> dev.npxisa.0.%parent: acpi0
> dev.atkbdc.0.%parent: acpi0
> dev.psmcpnp.0.%parent: acpi0
> dev.fdc.0.%parent: acpi0
> dev.sio.0.%parent: acpi0
> dev.sio.1.%parent: acpi0
> dev.ppc.0.%parent: acpi0
> dev.acpi_cmbat.0.%desc: Control Method Battery
> dev.acpi_cmbat.0.%driver: acpi_cmbat
> dev.acpi_cmbat.0.%location: handle=\_SB_.PCI0.LPC_.EC__.BAT0
> dev.acpi_cmbat.0.%pnpinfo: _HID=PNP0C0A _UID=0
> dev.acpi_cmbat.0.%parent: acpi0
> dev.acpi_acad.0.%desc: AC Adapter
> dev.acpi_acad.0.%driver: acpi_acad
> dev.acpi_acad.0.%location: handle=\_SB_.PCI0.LPC_.EC__.AC__
> dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0
> dev.acpi_acad.0.%parent: acpi0
>
> Cheers, Jochen
I'd also be happy to test if you send exactly what you want tested. Thinkpad
R40 with p4m here.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.