Re: ath problems again

i tried again. this time the output was longer:

===> ath
cc -O -pipe -mcpu=pentiumpro -I.
-I/usr/src/sys/modules/ath/../../contrib/dev/ath/freebsd -I/usr/src/s
ys/modules/ath/../../contrib/dev/ath  -D_KERNEL -Wall -Wredundant-decls
-Wnested-externs -Wstrict-prot
otypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual 
-fformat-extensions -std=c99 -DKLD_
MODULE -nostdinc -I-  -I.
-I/usr/src/sys/modules/ath/../../contrib/dev/ath/freebsd
-I/usr/src/sys/modu
les/ath/../../contrib/dev/ath -I. -I@ -I@/../include -finline-limit=15000
-fno-common  -mno-align-long
-strings -mpreferred-stack-boundary=2 -ffreestanding -Wall
-Wredundant-decls -Wnested-externs -Wstrict
-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual 
-fformat-extensions -std=c99 -
c /usr/src/sys/dev/ath/if_ath.c
/usr/src/sys/dev/ath/if_ath.c: In function `ath_beacon_config':
/usr/src/sys/dev/ath/if_ath.c:1518: error: too many arguments to function
/usr/src/sys/dev/ath/if_ath.c: In function `ath_node_alloc':
/usr/src/sys/dev/ath/if_ath.c:1672: error: `M_80211_NODE' undeclared
(first use in this function)
/usr/src/sys/dev/ath/if_ath.c:1672: error: (Each undeclared identifier is
reported only once
/usr/src/sys/dev/ath/if_ath.c:1672: error: for each function it appears in.)
/usr/src/sys/dev/ath/if_ath.c: In function `ath_rx_proc':
/usr/src/sys/dev/ath/if_ath.c:1941: warning: implicit declaration of
function `bpf_mtap2'
/usr/src/sys/dev/ath/if_ath.c:2023: error: too few arguments to function
/usr/src/sys/dev/ath/if_ath.c: In function `ath_newstate':
/usr/src/sys/dev/ath/if_ath.c:2821: error: too many arguments to function
/usr/src/sys/dev/ath/if_ath.c:2823: error: too many arguments to function
*** Error code 1

Stop in /usr/src/sys/modules/ath.
*** Error code 1

Stop in /usr/src/sys/modules.
*** Error code 1

Stop in /usr/src/sys/i386/compile/KERNME521_3.



> i tried to compile the net80211+ath-20040818 driver. got this:
>
> ../../../dev/ath/if_ath.c: In function `ath_beacon_config':
> ../../../dev/ath/if_ath.c:1516: error: too many arguments to function
> ../../../dev/ath/if_ath.c: In function `ath_rx_proc':
> ../../../dev/ath/if_ath.c:2030: error: too few arguments to function
> ../../../dev/ath/if_ath.c: In function `ath_newstate':
> ../../../dev/ath/if_ath.c:2838: error: too many arguments to function
> ../../../dev/ath/if_ath.c:2840: error: too many arguments to function
> *** Error code 1
>
> now what?
>
> thanks..
>
>
>
>> hi everybody...
>>
>> i had to use the ath card again.
>> after associating it starts dropping packets like crazy. i haven't
>> changed
>> anything since i used it last 3 weeks ago with the same router...
>> it cuts off every 7 - 10 packets. browser is just stalled... part of the
>> ping is below.
>> is there a new version somewhere? can anybody help?
>>
>> thanks
>>
>> PING 192.168.1.1 (192.168.1.1): 56 data bytes
>> 64 bytes from 192.168.1.1: icmp_seq=0 ttl=150 time=4.406 ms
>> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=150 time=2.338 ms
>> 64 bytes from 192.168.1.1: icmp_seq=2 ttl=150 time=2.008 ms
>> 64 bytes from 192.168.1.1: icmp_seq=3 ttl=150 time=2.122 ms
>> 64 bytes from 192.168.1.1: icmp_seq=4 ttl=150 time=2.055 ms
>> 64 bytes from 192.168.1.1: icmp_seq=5 ttl=150 time=2.005 ms
>> 64 bytes from 192.168.1.1: icmp_seq=6 ttl=150 time=1.984 ms
>> 64 bytes from 192.168.1.1: icmp_seq=7 ttl=150 time=2.017 ms
>> 64 bytes from 192.168.1.1: icmp_seq=8 ttl=150 time=2.101 ms
>> 64 bytes from 192.168.1.1: icmp_seq=14 ttl=150 time=306.406 ms
>> 64 bytes from 192.168.1.1: icmp_seq=15 ttl=150 time=2.465 ms
>> 64 bytes from 192.168.1.1: icmp_seq=16 ttl=150 time=2.433 ms
>> 64 bytes from 192.168.1.1: icmp_seq=17 ttl=150 time=2.443 ms
>> 64 bytes from 192.168.1.1: icmp_seq=18 ttl=150 time=2.508 ms
>> 64 bytes from 192.168.1.1: icmp_seq=19 ttl=150 time=2.466 ms
>> 64 bytes from 192.168.1.1: icmp_seq=20 ttl=150 time=2.810 ms
>> 64 bytes from 192.168.1.1: icmp_seq=21 ttl=150 time=4.344 ms
>> 64 bytes from 192.168.1.1: icmp_seq=22 ttl=150 time=2.540 ms
>> 64 bytes from 192.168.1.1: icmp_seq=23 ttl=150 time=2.596 ms
>> 64 bytes from 192.168.1.1: icmp_seq=29 ttl=150 time=175.933 ms
>> 64 bytes from 192.168.1.1: icmp_seq=30 ttl=150 time=1.980 ms
>> 64 bytes from 192.168.1.1: icmp_seq=31 ttl=150 time=2.502 ms
>> 64 bytes from 192.168.1.1: icmp_seq=32 ttl=150 time=2.035 ms
>> 64 bytes from 192.168.1.1: icmp_seq=33 ttl=150 time=2.046 ms
>> 64 bytes from 192.168.1.1: icmp_seq=34 ttl=150 time=2.539 ms
>> 64 bytes from 192.168.1.1: icmp_seq=35 ttl=150 time=2.406 ms
>> 64 bytes from 192.168.1.1: icmp_seq=41 ttl=150 time=35.484 ms
>> 64 bytes from 192.168.1.1: icmp_seq=42 ttl=150 time=4.065 ms
>> 64 bytes from 192.168.1.1: icmp_seq=43 ttl=150 time=3.708 ms
>> 64 bytes from 192.168.1.1: icmp_seq=44 ttl=150 time=2.528 ms
>> 64 bytes from 192.168.1.1: icmp_seq=45 ttl=150 time=2.615 ms
>> 64 bytes from 192.168.1.1: icmp_seq=46 ttl=150 time=2.581 ms
>> 64 bytes from 192.168.1.1: icmp_seq=47 ttl=150 time=2.622 ms
>> 64 bytes from 192.168.1.1: icmp_seq=48 ttl=150 time=2.506 ms
>> 64 bytes from 192.168.1.1: icmp_seq=49 ttl=150 time=2.789 ms
>> 64 bytes from 192.168.1.1: icmp_seq=50 ttl=150 time=2.006 ms
>> 64 bytes from 192.168.1.1: icmp_seq=51 ttl=150 time=7.904 ms
>> 64 bytes from 192.168.1.1: icmp_seq=56 ttl=150 time=876.891 ms
>> 64 bytes from 192.168.1.1: icmp_seq=57 ttl=150 time=4.109 ms
>> 64 bytes from 192.168.1.1: icmp_seq=58 ttl=150 time=2.652 ms
>> 64 bytes from 192.168.1.1: icmp_seq=59 ttl=150 time=2.595 ms
>> 64 bytes from 192.168.1.1: icmp_seq=60 ttl=150 time=2.037 ms
>> 64 bytes from 192.168.1.1: icmp_seq=61 ttl=150 time=2.007 ms
>> 64 bytes from 192.168.1.1: icmp_seq=62 ttl=150 time=2.038 ms
>> 64 bytes from 192.168.1.1: icmp_seq=63 ttl=150 time=2.598 ms
>> 64 bytes from 192.168.1.1: icmp_seq=64 ttl=150 time=2.040 ms
>> 64 bytes from 192.168.1.1: icmp_seq=65 ttl=150 time=2.601 ms
>> 64 bytes from 192.168.1.1: icmp_seq=66 ttl=150 time=2.757 ms
>> 64 bytes from 192.168.1.1: icmp_seq=71 ttl=150 time=795.986 ms
>> 64 bytes from 192.168.1.1: icmp_seq=72 ttl=150 time=7.793 ms
>> 64 bytes from 192.168.1.1: icmp_seq=73 ttl=150 time=2.465 ms
>> 64 bytes from 192.168.1.1: icmp_seq=74 ttl=150 time=2.033 ms
>> 64 bytes from 192.168.1.1: icmp_seq=75 ttl=150 time=2.087 ms
>> 64 bytes from 192.168.1.1: icmp_seq=76 ttl=150 time=2.529 ms
>> 64 bytes from 192.168.1.1: icmp_seq=77 ttl=150 time=2.039 ms
>> 64 bytes from 192.168.1.1: icmp_seq=78 ttl=150 time=2.066 ms
>> 64 bytes from 192.168.1.1: icmp_seq=84 ttl=150 time=596.179 ms
>> 64 bytes from 192.168.1.1: icmp_seq=85 ttl=150 time=2.619 ms
>> 64 bytes from 192.168.1.1: icmp_seq=86 ttl=150 time=2.031 ms
>>
>>
>> --
>>
>> _______________________________________________
>> [email protected] mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
>> To unsubscribe, send any mail to
>> "[email protected]"
>>
>
>
> --
>
> _______________________________________________
> [email protected] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "[email protected]"
>


-- 

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"