Fwd: Re: POWER9 Blackbird Powerup Issue

Forwarding, as I used the wrong mail alias by mistake and it bounced.

----- Original message -----
From: Brandon Bergren <[email protected]>
To: Curtis Hamilton <[email protected]>, FreeBSD PowerPC ML <[email protected]>
Subject: Re: POWER9 Blackbird Powerup Issue
Date: Saturday, June 17, 2023 3:27 PM

You have a BMC serial port hooked up already, correct? (not to be confused with the host serial port.)

Here are the procedures to fix OpenBMC after mishaps.

https://wiki.raptorcs.com/wiki/Debricking_the_BMC

If those don't work, I would inspect the board carefully for damage. As long as there isn't physical damage, there is always the option of reflashing the BMC.

On Sat, Jun 17, 2023, at 2:29 PM, Curtis Hamilton wrote:
> I’m have an issue with my blackbird and can’t get support from RaptorCS
> because it’s out of warranty.  So I wanted to see if anyone else has
> experienced the same or similar issue.
>
> The blackbird refuses to boot into OpenBMC after being powered off to
> install a discrete GPU.  The OpenBMC led ( ) continues to flash rapidly
> with a momentary pause, then continues to flash rapidly.  The power led
> stays orange.
>
> I’ve checked raptors wiki, forums and the how-to guides, but don’t see
> anything similar to my issue. I’ve tried leaving it completely powered off
> for several days but the problem still remains.
>
> Any suggestions/help would really be appreciated.
>
> Regards

-- 
  Brandon Bergren
Technical Generalist

-- 
  Brandon Bergren
  [email protected]