Re: pcmcia0: card appears to have bogus cis for PCI1420 PC Card Controller
Radu-Cristian FOTESCU <[email protected]>
| Newsgroups | gmane.os.netbsd.help |
|---|---|
| Message-ID | <[email protected]> |
--- Greg Troxel <[email protected]> wrote: > That's not the least bit clear. You could have a laptop with a broken > bios that fails to set up interrupts correctly. > > Look at your dmesg to see if the cardbus bridge was attached. It will > show up as cbb0 if so. If not, you may see something like 'cbb0 not > configured because of unconfigured interrupt'. Yeah, but it's *only* NetBSD who *thinks* it's broken. Do you want me to list again the long row of OSes who have no problem with that? --- cbb0 at pci0 dev 4 function 0: Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00) cbb0: NOT USED because of unconfigured interrupt cbb0 at pci0 dev 4 function 1: Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00) cbb0: NOT USED because of unconfigured interrupt ... pcmcia0 at pcic0 controller 0 socket 0 pcmcia1 at pcic0 controller 0 socket 1 --- And what is PCMCIA doing here once you say pcmcia != cardbus ?! I thought that CardBus is _over_ PCMCIA, but the detection order is reverded?! And again, the NetBSD-4 line is seeing the same CardBus correctly... so please, don't tell me that _my_ hardware is wrong, when only NetBSD 3.1 can't see it :-(( R-C Ask a question on any topic and get answers from real people. Go to Yahoo! Answers and share what you know at http://ca.answers.yahoo.com