Re: 5.0_RC2 restorecd
Izumi Tsutsui <[email protected]> Tue, 31 Mar 2009 00:03:04 +0900
| Newsgroups | gmane.os.netbsd.ports.cobalt |
|---|---|
| Message-ID | <[email protected]> |
[email protected] wrote: > Thanks for thoughts on troubleshooting this further; I'm at my > endpoint at this time. Hmm, it works on my Qube 2, so I have no idea. --- Cobalt Microserver Diagnostics - 'We serve it, you surf it' Built Tue May 25 15:58:41 PDT 1999 1.LCD Test................................PASS 2.Controller Test.........................PASS 5.Bank 0:.................................64M 6.Bank 1:.................................0M 7.Bank 2:.................................0M 8.Bank 3:.................................0M 9.Serial Test.............................PASS 10.PCI Expansion Slot....................**EMPTY** 12.IDE Test................................PASS 13.Ethernet Test...........................PASS 16.RTC Test................................PASS Decompressing done Executing bootloader kernel... Decompressing -- done. >> NetBSD/cobalt 5.0_RC2 Bootloader, Revision 0.9 [@0x80f00000] >> ([email protected], Thu Feb 26 23:08:49 UTC 2009) >> Model: Cobalt Qube 2 >> Memory: 65536 k >> PROM boot string: root=/dev/nfs nfsroot=/nfsroot nfsaddrs=bootp Boot [nfs:netbsd]: Loading: nfs:netbsd 3768496+312196 [217056+209764]=0x44cc84 Starting at 0x80001000 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.0_RC2 (GENERIC) #0: Thu Feb 26 23:19:36 UTC 2009 [email protected]:/home/builds/ab/netbsd-5/cobalt/200902260000Z-obj/home/builds/ab/netbsd-5/src/sys/arch/cobalt/compile/GENERIC Cobalt Qube 2 total memory = 65536 KB avail memory = 59504 KB mainbus0 (root) com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo com0: console cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0 cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock panel0 at mainbus0 addr 0x1f000000 gt0 at mainbus0 addr 0x14000000 pci0 at gt0 pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1 tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1 tlp0: interrupting at level 1 tlp0: Ethernet address 00:10:e0:00:eb:7e lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib0 at pci0 dev 9 function 0 pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39 viaide0 at pci0 dev 9 function 1 viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at pci0 dev 9 function 2 not configured tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1 tlp1: interrupting at level 2 tlp1: Ethernet address 00:10:e0:00:eb:78 lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto wd0 at atabus0 drive 0: <ST320423A> wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors Kernelized RAIDframe activated boot device: tlp0 root on tlp0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 10.0.0.254 nfs_boot: my_domain=netbsd.org nfs_boot: my_addr=10.0.0.160 nfs_boot: my_mask=255.0.0.0 nfs_boot: gateway=10.0.0.254 root on 10.0.0.254:/nfsroot root file system type: nfs WARNING: clock gained 30 days WARNING: CHECK AND RESET THE DATE! warning: no /dev/console Created mfs /dev (519 blocks, 1568 inodes) Mon Mar 30 22:47:56 UTC 2009 Starting file system checks: Create /dev/* Unpack /var/* Setting tty flags. Setting sysctl variables: Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Mounting all filesystems... Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 /etc/rc: WARNING: No swap space configured! Starting local daemons:. Updating motd. Starting paneld. Starting inetd. Mon Mar 30 22:48:35 UTC 2009 NetBSD/cobalt (Amnesiac) (tty00) login: root Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.0_RC2 (GENERIC) #0: Thu Feb 26 23:19:36 UTC 2009 Welcome to NetBSD! This system is running a release candidate of the NetBSD operating system, aimed at shaking out the most serious bugs that may affect the next formal release. It should be considered close to release quality, but may still contain unresolved issues. You are encouraged to test this version as thoroughly as possible. Should you encounter any problem, please report it back to the development team using the send-pr(1) utility (requires a working MTA). If yours is not properly set up, use the web interface at: http://www.NetBSD.org/support/send-pr.html Thank you for helping us test and improve this NetBSD release candidate. Terminal type is vt100. We recommend creating a non-root account and using su(1) for root access. # ------------------------------------------------ Disk Setup: Reset disk ------------------------------------------------ fdisk: Cannot determine the number of heads wd0: no disk label fdisk: Cannot determine the number of heads ------------------------------------------------ Disk Setup: Add Ext2 slice ------------------------------------------------ wd0: no disk label fdisk: Cannot determine the number of heads ------------------------------------------------ Disk Setup: Enable swap ------------------------------------------------ wd0: no disk label ------------------------------------------------ Disk Setup: Add BSD slice ------------------------------------------------ wd0: no disk label ------------------------------------------------ Disk Setup: Format boot ------------------------------------------------ /dev/rwd0e: 10.3MB (21105 sectors) block size 1024, fragment size 1024 using 2 block groups of 8.0MB, 8192 blks, 1320 inodes. super-block backups (for fsck_ext2fs -b #) at: 8193, ------------------------------------------------ Disk Setup: Format /var ------------------------------------------------ /dev/rwd0f: 2048.5MB (4195296 sectors) block size 16384, fragment size 2048 using 12 cylinder groups of 170.72MB, 10926 blks, 21504 inodes. super-block backups (for fsck_ffs -b #) at: 32, 349664, 699296, 1048928, 1398560, 1748192, 2097824, 2447456, 2797088, ............................................................................... ------------------------------------------------ Disk Setup: Format /tmp ------------------------------------------------ /dev/rwd0g: 500.1MB (1024128 sectors) block size 8192, fragment size 1024 using 11 cylinder groups of 45.46MB, 5819 blks, 11328 inodes. super-block backups (for fsck_ffs -b #) at: 32, 93136, 186240, 279344, 372448, 465552, 558656, 651760, 744864, 837968, ............................................................................... ------------------------------------------------ Disk Setup: Format root ------------------------------------------------ /dev/rwd0a: 16849.4MB (34507620 sectors) block size 16384, fragment size 2048 using 92 cylinder groups of 183.16MB, 11722 blks, 23168 inodes. super-block backups (for fsck_ffs -b #) at: 32, 375136, 750240, 1125344, 1500448, 1875552, 2250656, 2625760, 3000864, ............................................................................... ------------------------------------------------ System install: Prepare... ------------------------------------------------ ------------------------------------------------ System install: base.tgz ------------------------------------------------ ------------------------------------------------ System install: comp.tgz ------------------------------------------------ ------------------------------------------------ System install: etc.tgz ------------------------------------------------ ------------------------------------------------ System install: man.tgz ------------------------------------------------ ------------------------------------------------ System install: misc.tgz ------------------------------------------------ ------------------------------------------------ System install: text.tgz ------------------------------------------------ ------------------------------------------------ System install: Unpack kernel ------------------------------------------------ ------------------------------------------------ System install: Setup /boot ------------------------------------------------ ------------------------------------------------ System install: Create /dev/* ------------------------------------------------ ------------------------------------------------ System install: Fix /etc/* ------------------------------------------------ ------------------------------------------------ System install: Finalizing... ------------------------------------------------ ------------------------------------------------ Installed OK: Rebooting... ------------------------------------------------ Mar 30 22:56:33 reboot: rebooted by root Mar 30 22:56:33 init: can't add utmpx record for `tty00': No such file or directory Mar 30 22:56:33 init: can't add utmpx record for `ttyZ0': No such file or directory reboot: syncing disks... done unmounting file systems...WARNING: some process(es) wouldn't die done rebooting... lCobalt Microserver Diagnostics - 'We serve it, you surf it' Built Tue May 25 15:58:41 PDT 1999 1.LCD Test..............................**NOT FOUND** 2.Controller Test.........................PASS 5.Bank 0:.................................64M 6.Bank 1:.................................0M 7.Bank 2:.................................0M 8.Bank 3:.................................0M 9.Serial Test.............................PASS 10.PCI Expansion Slot....................**EMPTY** 12.IDE Test................................PASS 13.Ethernet Test...........................PASS 16.RTC Test................................PASS BOOTLOADER ramcode: selected partition /dev/hda1 Decompressing done Executing bootloader kernel... Decompressing -- done. >> NetBSD/cobalt 5.0_RC2 Bootloader, Revision 0.9 [@0x80f00000] >> ([email protected], Thu Feb 26 23:08:49 UTC 2009) >> Model: Cobalt Qube 2 >> Memory: 65536 k >> PROM boot string: root=/dev/hda1 ro Boot [wd0a:netbsd]: Loading: wd0a:netbsd 3768496+312196 [217056+209764]=0x44cc84 Starting at 0x80001000 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.0_RC2 (GENERIC) #0: Thu Feb 26 23:19:36 UTC 2009 [email protected]:/home/builds/ab/netbsd-5/cobalt/200902260000Z-obj/home/builds/ab/netbsd-5/src/sys/arch/cobalt/compile/GENERIC Cobalt Qube 2 total memory = 65536 KB avail memory = 59504 KB mainbus0 (root) com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo com0: console cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0 cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock panel0 at mainbus0 addr 0x1f000000 gt0 at mainbus0 addr 0x14000000 pci0 at gt0 pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1 tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1 tlp0: interrupting at level 1 tlp0: Ethernet address 00:10:e0:00:eb:7e lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib0 at pci0 dev 9 function 0 pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39 viaide0 at pci0 dev 9 function 1 viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at pci0 dev 9 function 2 not configured tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1 tlp1: interrupting at level 2 tlp1: Ethernet address 00:10:e0:00:eb:78 lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3 lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto wd0 at atabus0 drive 0: <ST320423A> wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors Kernelized RAIDframe activated boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs Mon Mar 30 22:57:31 UTC 2009 swapctl: adding /dev/wd0b as swap device at priority 0 Starting file system checks: /dev/rwd0a: file system is clean; not checking /dev/rwd0e: file system is clean; not checking /dev/rwd0f: file system is clean; not checking /dev/rwd0g: file system is clean; not checking Setting tty flags. Setting sysctl variables: Starting network. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Starting dhclient. Internet Systems Consortium DHCP Client V3.0.3 Copyright 2004-2005 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP Listening on BPF/tlp1/00:10:e0:00:eb:78 Sending on BPF/tlp1/00:10:e0:00:eb:78 Listening on BPF/tlp0/00:10:e0:00:eb:7e Sending on BPF/tlp0/00:10:e0:00:eb:7e Sending on Socket/fallback DHCPDISCOVER on tlp0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on tlp1 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on tlp0 to 255.255.255.255 port 67 interval 8 DHCPOFFER from 10.0.0.254 DHCPREQUEST on tlp0 to 255.255.255.255 port 67 DHCPACK from 10.0.0.254 bound to 10.0.0.160 -- renewal in 302 seconds. Building databases: dev, utmp, utmpx, services done Starting syslogd. Checking for core dump... savecore: no core dump Mounting all filesystems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. Starting local daemons:. Updating motd. postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db) newaliases: warning: valid_hostname: empty hostname newaliases: fatal: unable to use my own hostname Mar 30 22:58:21 postfix/sendmail[390]: fatal: unable to use my own hostname Starting paneld. Starting inetd. Starting cron. Mon Mar 30 22:58:24 UTC 2009 Mar 30 22:58:26 getty[438]: /dev/ttyZ0: Device not configured NetBSD/cobalt (Amnesiac) (tty00) login: --- Izumi Tsutsui