Re: 5.0_RC2 restorecd
Brian <[email protected]> Mon, 30 Mar 2009 20:30:57 -0400
| Newsgroups | gmane.os.netbsd.ports.cobalt |
|---|---|
| Message-ID | <[email protected]> |
hmm... indeed. How should I best troubleshoot? The telnetd doesn't seem to be coming up all the way, even. grrrrr. Well, I'll fiddle with it. Thanks! Brian On Mar 30, 2009, at 11:03 AM, Izumi Tsutsui wrote: > [email protected] wrote: > >> Thanks for thoughts on troubleshooting this further; I'm at my >> endpoint at this time. > > Hmm, it works on my Qube 2, so I have no idea. > > --- > Cobalt Microserver Diagnostics - 'We serve it, you surf it' > Built Tue May 25 15:58:41 PDT 1999 > > 1.LCD Test................................PASS > 2.Controller Test.........................PASS > 5.Bank 0:.................................64M > 6.Bank 1:.................................0M > 7.Bank 2:.................................0M > 8.Bank 3:.................................0M > 9.Serial Test.............................PASS > 10.PCI Expansion Slot....................**EMPTY** > 12.IDE Test................................PASS > 13.Ethernet Test...........................PASS > 16.RTC Test................................PASS > Decompressing done > Executing bootloader kernel... > Decompressing -- done. > >>> NetBSD/cobalt 5.0_RC2 Bootloader, Revision 0.9 [@0x80f00000] >>> ([email protected], Thu Feb 26 23:08:49 UTC 2009) >>> Model: Cobalt Qube 2 >>> Memory: 65536 k >>> PROM boot string: root=/dev/nfs nfsroot=/nfsroot nfsaddrs=bootp > Boot [nfs:netbsd]: > Loading: nfs:netbsd > 3768496+312196 [217056+209764]=0x44cc84 > Starting at 0x80001000 > > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, > 2005, > 2006, 2007, 2008 > The NetBSD Foundation, Inc. All rights reserved. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > > NetBSD 5.0_RC2 (GENERIC) #0: Thu Feb 26 23:19:36 UTC 2009 > [email protected]:/home/builds/ab/netbsd-5/cobalt/200902260000Z- > obj/home/builds/ab/netbsd-5/src/sys/arch/cobalt/compile/GENERIC > Cobalt Qube 2 > total memory = 65536 KB > avail memory = 59504 KB > mainbus0 (root) > com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo > com0: console > cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in > FPU Rev. 10.0 > cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB > entries > cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache > mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of- > day clock > panel0 at mainbus0 addr 0x1f000000 > gt0 at mainbus0 addr 0x14000000 > pci0 at gt0 > pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, > rev 1 > tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1 > tlp0: interrupting at level 1 > tlp0: Ethernet address 00:10:e0:00:eb:7e > lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3 > lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pcib0 at pci0 dev 9 function 0 > pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39 > viaide0 at pci0 dev 9 function 1 > viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller > viaide0: primary channel interrupting at irq 14 > atabus0 at viaide0 channel 0 > viaide0: secondary channel interrupting at irq 15 > atabus1 at viaide0 channel 1 > VIA Technologies VT83C572 USB Controller (USB serial bus, revision > 0x02) at pci0 dev 9 function 2 not configured > tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1 > tlp1: interrupting at level 2 > tlp1: Ethernet address 00:10:e0:00:eb:78 > lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3 > lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > wd0 at atabus0 drive 0: <ST320423A> > wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 > sectors > Kernelized RAIDframe activated > boot device: tlp0 > root on tlp0 > nfs_boot: trying DHCP/BOOTP > nfs_boot: DHCP next-server: 10.0.0.254 > nfs_boot: my_domain=netbsd.org > nfs_boot: my_addr=10.0.0.160 > nfs_boot: my_mask=255.0.0.0 > nfs_boot: gateway=10.0.0.254 > root on 10.0.0.254:/nfsroot > root file system type: nfs > WARNING: clock gained 30 days > WARNING: CHECK AND RESET THE DATE! > warning: no /dev/console > Created mfs /dev (519 blocks, 1568 inodes) > Mon Mar 30 22:47:56 UTC 2009 > Starting file system checks: > Create /dev/* > Unpack /var/* > Setting tty flags. > Setting sysctl variables: > Starting network. > /etc/rc: WARNING: $hostname not set. > IPv6 mode: host > Configuring network interfaces:. > Adding interface aliases:. > Mounting all filesystems... > Checking quotas: done. > Setting securelevel: kern.securelevel: 0 -> 1 > /etc/rc: WARNING: No swap space configured! > Starting local daemons:. > Updating motd. > Starting paneld. > Starting inetd. > Mon Mar 30 22:48:35 UTC 2009 > > NetBSD/cobalt (Amnesiac) (tty00) > > login: root > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, > 2005, > 2006, 2007, 2008 > The NetBSD Foundation, Inc. All rights reserved. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > > NetBSD 5.0_RC2 (GENERIC) #0: Thu Feb 26 23:19:36 UTC 2009 > > Welcome to NetBSD! > > This system is running a release candidate of the NetBSD operating > system, > aimed at shaking out the most serious bugs that may affect the next > formal > release. It should be considered close to release quality, but may > still > contain unresolved issues. > > You are encouraged to test this version as thoroughly as possible. > Should you > encounter any problem, please report it back to the development team > using the > send-pr(1) utility (requires a working MTA). If yours is not > properly set up, > use the web interface at: http://www.NetBSD.org/support/send-pr.html > > Thank you for helping us test and improve this NetBSD release > candidate. > > Terminal type is vt100. > We recommend creating a non-root account and using su(1) for root > access. > # > ------------------------------------------------ > Disk Setup: Reset disk > ------------------------------------------------ > > fdisk: Cannot determine the number of heads > wd0: no disk label > fdisk: Cannot determine the number of heads > > ------------------------------------------------ > Disk Setup: Add Ext2 slice > ------------------------------------------------ > > wd0: no disk label > fdisk: Cannot determine the number of heads > > ------------------------------------------------ > Disk Setup: Enable swap > ------------------------------------------------ > > wd0: no disk label > > ------------------------------------------------ > Disk Setup: Add BSD slice > ------------------------------------------------ > > wd0: no disk label > > ------------------------------------------------ > Disk Setup: Format boot > ------------------------------------------------ > > /dev/rwd0e: 10.3MB (21105 sectors) block size 1024, fragment size 1024 > using 2 block groups of 8.0MB, 8192 blks, 1320 inodes. > super-block backups (for fsck_ext2fs -b #) at: > 8193, > > ------------------------------------------------ > Disk Setup: Format /var > ------------------------------------------------ > > /dev/rwd0f: 2048.5MB (4195296 sectors) block size 16384, fragment > size 2048 > using 12 cylinder groups of 170.72MB, 10926 blks, 21504 inodes. > super-block backups (for fsck_ffs -b #) at: > 32, 349664, 699296, 1048928, 1398560, 1748192, 2097824, 2447456, > 2797088, > ............................................................................... > > ------------------------------------------------ > Disk Setup: Format /tmp > ------------------------------------------------ > > /dev/rwd0g: 500.1MB (1024128 sectors) block size 8192, fragment size > 1024 > using 11 cylinder groups of 45.46MB, 5819 blks, 11328 inodes. > super-block backups (for fsck_ffs -b #) at: > 32, 93136, 186240, 279344, 372448, 465552, 558656, 651760, 744864, > 837968, > ............................................................................... > > ------------------------------------------------ > Disk Setup: Format root > ------------------------------------------------ > > /dev/rwd0a: 16849.4MB (34507620 sectors) block size 16384, fragment > size 2048 > using 92 cylinder groups of 183.16MB, 11722 blks, 23168 inodes. > super-block backups (for fsck_ffs -b #) at: > 32, 375136, 750240, 1125344, 1500448, 1875552, 2250656, 2625760, > 3000864, > ............................................................................... > > ------------------------------------------------ > System install: Prepare... > ------------------------------------------------ > > > ------------------------------------------------ > System install: base.tgz > ------------------------------------------------ > > > ------------------------------------------------ > System install: comp.tgz > ------------------------------------------------ > > > ------------------------------------------------ > System install: etc.tgz > ------------------------------------------------ > > > ------------------------------------------------ > System install: man.tgz > ------------------------------------------------ > > > ------------------------------------------------ > System install: misc.tgz > ------------------------------------------------ > > > ------------------------------------------------ > System install: text.tgz > ------------------------------------------------ > > > ------------------------------------------------ > System install: Unpack kernel > ------------------------------------------------ > > > ------------------------------------------------ > System install: Setup /boot > ------------------------------------------------ > > > ------------------------------------------------ > System install: Create /dev/* > ------------------------------------------------ > > > ------------------------------------------------ > System install: Fix /etc/* > ------------------------------------------------ > > > ------------------------------------------------ > System install: Finalizing... > ------------------------------------------------ > > > ------------------------------------------------ > Installed OK: Rebooting... > ------------------------------------------------ > > Mar 30 22:56:33 reboot: rebooted by root > Mar 30 22:56:33 init: can't add utmpx record for `tty00': No such > file or directory > Mar 30 22:56:33 init: can't add utmpx record for `ttyZ0': No such > file or directory > reboot: syncing disks... done > unmounting file systems...WARNING: some process(es) wouldn't die > done > rebooting... > > lCobalt Microserver Diagnostics - 'We serve it, you surf it' > Built Tue May 25 15:58:41 PDT 1999 > > 1.LCD Test..............................**NOT FOUND** > 2.Controller Test.........................PASS > 5.Bank 0:.................................64M > 6.Bank 1:.................................0M > 7.Bank 2:.................................0M > 8.Bank 3:.................................0M > 9.Serial Test.............................PASS > 10.PCI Expansion Slot....................**EMPTY** > 12.IDE Test................................PASS > 13.Ethernet Test...........................PASS > 16.RTC Test................................PASS > BOOTLOADER ramcode: selected partition /dev/hda1 > Decompressing done > Executing bootloader kernel... > Decompressing -- done. > >>> NetBSD/cobalt 5.0_RC2 Bootloader, Revision 0.9 [@0x80f00000] >>> ([email protected], Thu Feb 26 23:08:49 UTC 2009) >>> Model: Cobalt Qube 2 >>> Memory: 65536 k >>> PROM boot string: root=/dev/hda1 ro > Boot [wd0a:netbsd]: > Loading: wd0a:netbsd > 3768496+312196 [217056+209764]=0x44cc84 > Starting at 0x80001000 > > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, > 2005, > 2006, 2007, 2008 > The NetBSD Foundation, Inc. All rights reserved. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > > NetBSD 5.0_RC2 (GENERIC) #0: Thu Feb 26 23:19:36 UTC 2009 > [email protected]:/home/builds/ab/netbsd-5/cobalt/200902260000Z- > obj/home/builds/ab/netbsd-5/src/sys/arch/cobalt/compile/GENERIC > Cobalt Qube 2 > total memory = 65536 KB > avail memory = 59504 KB > mainbus0 (root) > com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo > com0: console > cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in > FPU Rev. 10.0 > cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB > entries > cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache > mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of- > day clock > panel0 at mainbus0 addr 0x1f000000 > gt0 at mainbus0 addr 0x14000000 > pci0 at gt0 > pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, > rev 1 > tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1 > tlp0: interrupting at level 1 > tlp0: Ethernet address 00:10:e0:00:eb:7e > lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3 > lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pcib0 at pci0 dev 9 function 0 > pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39 > viaide0 at pci0 dev 9 function 1 > viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller > viaide0: primary channel interrupting at irq 14 > atabus0 at viaide0 channel 0 > viaide0: secondary channel interrupting at irq 15 > atabus1 at viaide0 channel 1 > VIA Technologies VT83C572 USB Controller (USB serial bus, revision > 0x02) at pci0 dev 9 function 2 not configured > tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1 > tlp1: interrupting at level 2 > tlp1: Ethernet address 00:10:e0:00:eb:78 > lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3 > lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > wd0 at atabus0 drive 0: <ST320423A> > wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 > sectors > Kernelized RAIDframe activated > boot device: wd0 > root on wd0a dumps on wd0b > root file system type: ffs > Mon Mar 30 22:57:31 UTC 2009 > swapctl: adding /dev/wd0b as swap device at priority 0 > Starting file system checks: > /dev/rwd0a: file system is clean; not checking > /dev/rwd0e: file system is clean; not checking > /dev/rwd0f: file system is clean; not checking > /dev/rwd0g: file system is clean; not checking > Setting tty flags. > Setting sysctl variables: > Starting network. > IPv6 mode: host > Configuring network interfaces:. > Adding interface aliases:. > Starting dhclient. > Internet Systems Consortium DHCP Client V3.0.3 > Copyright 2004-2005 Internet Systems Consortium. > All rights reserved. > For info, please visit http://www.isc.org/products/DHCP > > Listening on BPF/tlp1/00:10:e0:00:eb:78 > Sending on BPF/tlp1/00:10:e0:00:eb:78 > Listening on BPF/tlp0/00:10:e0:00:eb:7e > Sending on BPF/tlp0/00:10:e0:00:eb:7e > Sending on Socket/fallback > DHCPDISCOVER on tlp0 to 255.255.255.255 port 67 interval 3 > DHCPDISCOVER on tlp1 to 255.255.255.255 port 67 interval 3 > DHCPDISCOVER on tlp0 to 255.255.255.255 port 67 interval 8 > DHCPOFFER from 10.0.0.254 > DHCPREQUEST on tlp0 to 255.255.255.255 port 67 > DHCPACK from 10.0.0.254 > > bound to 10.0.0.160 -- renewal in 302 seconds. > Building databases: dev, utmp, utmpx, services done > Starting syslogd. > Checking for core dump... > savecore: no core dump > Mounting all filesystems... > Clearing temporary files. > Checking quotas: done. > Setting securelevel: kern.securelevel: 0 -> 1 > Starting virecover. > Starting local daemons:. > Updating motd. > postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db) > newaliases: warning: valid_hostname: empty hostname > newaliases: fatal: unable to use my own hostname > Mar 30 22:58:21 postfix/sendmail[390]: fatal: unable to use my own > hostname > Starting paneld. > Starting inetd. > Starting cron. > Mon Mar 30 22:58:24 UTC 2009 > Mar 30 22:58:26 getty[438]: /dev/ttyZ0: Device not configured > > NetBSD/cobalt (Amnesiac) (tty00) > > login: > > --- > Izumi Tsutsui