Re: Attempt to Add a New Tulip PNIC2 82C115 NIC Not Working
"Jonathan A. Kollasch" <[email protected]> Sat, 30 Aug 2025 08:24:20 -0500
| Newsgroups | gmane.os.netbsd.ports.i386 |
|---|---|
| Message-ID | <[email protected]> |
On Sat, Aug 30, 2025 at 06:40:46AM +0000, RVP wrote: > On Fri, 29 Aug 2025, Alexander Jacocks wrote: > > > $ sudo pcictl pci0 dump -d 10 > > PCI configuration registers: > > Common header: > > 0x00: 0x00000000 0x82900004 0x00000000 0x00004008 > > > > Vendor ID: 0x0000 > > Device ID: 0x0000 > > > > This is _very_ bad. Can you: > > 1. check that both this card, and the other one, are seated firmly in the slot. > > 2. try the cards in another PCI slot. > > 3. inspect the edge connectors--ensure that the metal hasn't worn off. > > 4. reset BIOS to defaults. 4.1 and then disable any "PnP OS" option.