Issue Installing NetBSD 4.0.1 from tape on a MVME-147 system...

Hello,

I am trying to install NetBSD 4.0.1 on a MVME-147 system with 8 MB of
RAM, a Viper 150 tape drive, and a Seagate 430MB disk drive.

Here is what occurs:


Copyright Motorola Inc. 1989, All Rights Reserved

VME147 Monitor/Debugger Release 2.2 - 8/7/89

FPC  passed test
MMU  passed test

COLD Start

Onboard  RAM start = $00000000,  stop = $007FFFFF

147-Bug>
147-Bug>bo 5

RAM address from VMEbus = $00000000

Booting from: VME147, Controller 5, Device 0
Loading File: 

Volume: NBSD

IPL loaded at:  $003F0000
>> NetBSD/mvme68k MVME147 tapeboot [1.5]
1357660+948432+80848=0x248c34
Start @ 0x8000 [1=0x250c00-0x250c34]...


After that, nothing.

Can anyone offer some ideas?

Best Regards,
Dave