Re: Issue Installing NetBSD 4.0.1 from tape on a MVME-147 system...

Steve Woodford <[email protected]> Wed, 4 Mar 2009 09:22:49 +0000

Newsgroups	gmane.os.netbsd.ports.mvme68k
Organization	The NetBSD Foundation
Message-ID	<[email protected]>

On Sunday 01 March 2009 20:33:43 David Croyle wrote:
> Hello,
>
> I am trying to install NetBSD 4.0.1 on a MVME-147 system with 8 MB of
> RAM, a Viper 150 tape drive, and a Seagate 430MB disk drive.
>
> Here is what occurs:
[snip]
> IPL loaded at:  $003F0000
>
> >> NetBSD/mvme68k MVME147 tapeboot [1.5]
>
> 1357660+948432+80848=0x248c34
> Start @ 0x8000 [1=0x250c00-0x250c34]...
>
> After that, nothing.

Please file a PR with send-pr(1). It will be a while before I can get 
around to dealing with this as my MVME kit is out of service just now.

Cheers, Steve