Re: MVME177 panic: pmap_enter_ptpage (PR #45915 on 6.x)

On Tue, Sep 17, 2013 at 6:40 AM, Izumi Tsutsui <[email protected]> wrote:
>
> Wow. I'm really glad that we still have a real mvme68k user!

I also have a MVME167 board, but I'm not sure the ethernet works as I
haven't been able to get any packets out of it.

> With a quick glance, probably we can move physmem (and other)
> calculations to the top of the function. (patch attached)

The kernel you built for me booted right up.  That patch seems good.  Thank you.
(dmesg below)

> Probably it's my fault on switching to MI libsa changes after 5.0:
> http://mail-index.netbsd.org/source-changes/2011/01/02/msg016539.html
>
> All BUGs binaries are converted to raw binaries by objdump -O binary,
> so I guess we explicitly have to link SRT0.o (which has an entry point)
> first. (patch attached too)

I tried the netboot too but it didn't work.  It was a bit odd.  Part
of it was dumped
to the console.  It looks like starting at offset 0x4F7A (20,346) it
dumped to the
console.

Here's the first bit of console output:
Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&23784, Bytes Loaded =&23784
Bytes/Second   =&23784, Elapsed Time =1 Second(s)
[a bunch of unprintable...]NOp  @Nu>> %s MVME%x netboot (via %s) [%s]
                               sbootboot: %s: %s
                                                boot: ERROR: ethernet
address not set!netie%d: ie_probe called
       ie%d: send %d to %x:%x:%x:%x:%x:%x
                                         ie%d: ie_match --> %d
                                                              ie%d:
ie_match --> 0

           ie%d: unknown errorie%d: ie_reset called
                   ie%d: ie_init called
                                       device: %s%d attached to %s



Thank you for your help!  I have it booted on your kernel with 6.1.1
userland (via NFS) and it
is working great.  I'll apply the patch to my local sources and cross
build a kernel.

-Andrew





###### dmesg ######

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1 (GENERIC) #0: Tue Sep 17 22:20:16 JST 2013
    tsutsui@mirage:/r/work/netbsd-6/src/sys/arch/mvme68k/compile/GENERIC
Motorola MVME-177: 50.0MHz MC68060 CPU+MMU+FPU, 8k+8k on-chip physical
I/D caches
total memory = 65536 KB
avail memory = 60952 KB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
pcctwo0 at mainbus0 address 0xfff42000: Peripheral Channel Controller
(PCCchip2), Rev 0
clock0 at pcctwo0 offset 0x0 ipl 5: delay_divisor 20
clmpcc0 at pcctwo0 offset 0x3000 ipl 4: Cirrus Logic CD2401 Serial Controller
clmpcc0: 4 channels available, console on channel 0.
ie0 at pcctwo0 offset 0x4000 ipl 3 address 08:00:3e:xx:xx:xx, type onboard
osiop0 at pcctwo0 offset 0x5000 ipl 2: NCR53C710 rev 2, 50MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets, 8 luns per target
lpt0 at pcctwo0 offset 0x0 ipl 1: PCCchip2 Parallel Printer
vmetwo0 at mainbus0 address 0xfff40000: Type 2 VMEchip, scon jumper enabled
vme0 at vmetwo0
timekeeper0 at mainbus0 address 0xfffc0000: mk48t08 Time-Keeper RAM
timekeeper0: 8192 bytes NVRAM plus Realtime Clock
memc0 at mainbus0 address 0xfff43000: 64MB ECC Memory Controller Chip (Rev 0)
memc0: Base Address: 0x0, Fast RAM Read Disabled
memc0: Logging ECC errors at ipl 6
memc at mainbus0 address 0xfff43100 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "pcctwo_count" frequency 1000000 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
boot device: ie0
root on ie0
nfs_boot: trying DHCP/BOOTP