Re: MVME177 panic: pmap_enter_ptpage (PR #45915 on 6.x)
Izumi Tsutsui <[email protected]> Thu, 19 Sep 2013 21:52:44 +0900
| Newsgroups | gmane.os.netbsd.ports.m68k,gmane.os.netbsd.ports.mvme68k |
|---|---|
| Message-ID | <[email protected]> |
Hi, > The kernel you built for me booted right up. That patch seems good. Thank you. > (dmesg below) Thanks. I've committed the fix and will send a pullup request for netbsd-6 branches later. > I tried the netboot too but it didn't work. It was a bit odd. Part > of it was dumped > to the console. It looks like starting at offset 0x4F7A (20,346) it > dumped to the > console. > > Here's the first bit of console output: > Network Boot File load in progress... To abort hit <BREAK> > > Bytes Received =&23784, Bytes Loaded =&23784 > Bytes/Second =&23784, Elapsed Time =1 Second(s) > [a bunch of unprintable...]NOp @Nu>> %s MVME%x netboot (via %s) [%s] : After a few hours analysis, this seems caused by a bug of gcc-4.5.x's __asm() statement. Could you try the following netboot binary built from the same sources but using gcc-4.1.3 from 5.x? ftp://ftp.netbsd.org/pub/NetBSD/misc/tsutsui/mvme68k/netbsd-6_20130917/netboot-gcc413.bin mvme68k bootloaders uses "MVMEPROM_OUTSTR" function for putchar(): http://nxr.netbsd.org/xref/src/sys/arch/mvme68k/stand/libbug/putchar.c?r=1.2#22 http://nxr.netbsd.org/xref/src/sys/arch/mvme68k/stand/libbug/outstr.c?r=1.3#12 http://nxr.netbsd.org/xref/src/sys/arch/mvme68k/include/prom.h?r=1.17#152 The OUTSTR call takes two pointer args, start and end addresses of strings. 6.x's gcc-4.5.x seems to pass an incorrect start address so a bunch of garbages are put onto the screen. gcc-4.1.3 in 5.x generates the following insns from the mvmeprom_outstr() source: --- movel %sp@(4),%d1 movel %sp@(8),%d0 movel %d0,%sp@- movel %d1,%sp@- trap #15 .short MVMEPROM_OUTSTR rts --- but gcc-4.5.3 in 6.x emits: --- movel %sp@(8),%d0 movel %d0,%sp@- movel %sp@(4),%d0 movel %d0,%sp@- trap #15 .short MVMEPROM_OUTSTR rts --- so the second args are taken from a wrong (post-decremented) %sp address. Disabling optimization (passing -O0 instead of -Os) doesn't help. Does anyone have suggestion how this should be fixed? Rewrite outstr (and the similar outln) functions in asm? --- Izumi Tsutsui