Re: Booting 10.0 from CD on Sparc IPC fails - Data Access Exception

Hi,

Mouse wrote:
> Some of the OBP settings require a reset to take effect.  I wouldn't
> trust this test without doing a reset in between the setenv and the
> boot attempt.

I have now the old boot rom.. it has also the old prompt!
I wanted to boot from the miniroot again, but failed. Very strange. Look

Type b (boot), c (continue), or n (new command mode)
 >boot sd(,,1)netbsd -s
Probing Memory Bank #: 1 2 3 4 5
Booting from: sd(0,0,0)oot sd(,,1)netbsd -s
 >> NetBSD/sparc Secondary Boot, Revision 1.15
 >> ([email protected], Tue Nov 25 12:41:36 UTC 2014)
Booting oot
-
device[sd(0,0,0)oot] ("halt" to halt): sd(0,0,1)netbsd -s
boot (press RETURN to try default list): netbsd -s
Booting netbsd -s
/
device[sd(0,0,1)netbsd -s] ("halt" to halt):
boot (press RETURN to try default list):
Booting netbsd
4890636+130636 [294080+279254]=0x5561e4
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 
2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 
2023,


now netbsd 10.0 boots but then... I end up with my existing root 
mounted. So kind of live system... but not what I expected.
I am not familiar with the old OBP....

but it looks as if it somehow misintepreted my boot command?

Riccardo